The Wacker Neuson Brake is a genuine OEM brake designed for the BFS series gasoline-powered floor saws, including the BFS735, BFS940, BFS1345, and BFS1350 model families. Sourced directly from Wacker Neuson, this part meets the exact specifications of the original component installed at the factory, ensuring proper stopping force and blade control across all compatible machines. With coverage spanning over 40 individual machine configurations — from basic 350mm saws through to 450mm professional-grade units — part number is the correct OEM choice for a wide range of BFS floor saw variants.
Key Features
- Certified Stopping Performance — Engineered to deliver the correct braking force for floor saw blade arrest, maintaining safe and controlled stops under cutting load conditions.
- Genuine OEM Part — Manufactured by Wacker Neuson to the same specification as the original brake, ensuring consistent engagement, release, and wear characteristics.
- Direct-Fit Replacement — Designed to install in place of the original brake without modification, matching original mounting points and hardware interfaces on compatible BFS machines.
- Broad BFS Series Coverage — Fits a wide range of Wacker Neuson BFS floor saw models including the BFS735, BFS940, BFS1345, BFS1350, BFS914, BFS1318, and BFS80 series variants.
- Critical Safety Component — A worn or failed brake on a floor saw can result in loss of blade control and unsafe run-down times; replacing with a correctly rated OEM part restores the machine's designed safety performance.
The brake on a floor saw is a safety-critical component responsible for stopping the rotation of the cutting blade once the operator releases the throttle or engages the brake control. On gasoline-powered machines like the Wacker Neuson BFS series, the brake must apply sufficient clamping or friction force to bring the blade to a full stop within an acceptable time, preventing injury and allowing the operator to safely reposition or exit the cut. When a brake wears out or fails, blade run-down time increases significantly, creating a serious hazard on the jobsite and putting the machine out of compliance with safe operating standards.
Part Details
| Part Number | 5000202730 |
|---|---|
| Old Part Number | 0202730 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Brake |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS735 | BFS735 | 5100029228, 5100054573 |
| BFS940 | BFS940 | 5100029229, 5100054574 |
| BFS1345 | BFS1345 | 5100029230, 5100054575 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| Basic floor saw, ø 450mm/18in | BFS 1345B | 5000008909, 5000610142 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| BFS 935 SAW,BASIC | BFS 935B | 5000008911 |
| BFS1350 | BFS1350 CN | 5100042680 |
| BFS735 | BFS735 CN | 5100042681 |
| BFS1350 | BFS1350 | 5100054576, 5100029231 |
| Gasoline Floor Saw, Ø 350 | BFS 80 | 5000006654 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BFS 914B SAW | BFS 914B | 5000610093 |
| Gasoline Floor Saw, Ø 450 (350 ) | BFS 100 | 5000007352 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Petrol Floor Saw BFS 940W | BFS 940W | 5000610328, 5100004005 |
| Petrol Floor Saw BFS 1350AB | BFS 1350AB | 5100000089 |
| Petrol Floor Saw BFS 1350B | BFS 1350W | 5100000090, 5100004013 |
| Petrol Floor Saw BFS 1345B | BFS 1345W | 5100001158, 5100004009 |
| Gasoline Powered Floor Saw | BFS 735A | 5100001816 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor Saw | BFS 914W | 5100004003 |
| Floor Saw | BFS 1318A | 5100004006 |
| Gasoline Powered Floor Saw | BFS 1345A | 5100004007 |
| Gasoline Powered Floor Saw | BFS 1350A | 5100004011 |
| Floor saw BFS735 | BFS 735 | 5100009932 |
| BFS1350 | BFS 1350 | 5100009933 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| BFS1345 Floor Saw | BFS 1345 | 5100009944 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
