The Wacker Neuson Crankcase Complete is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including VP and WP series vibratory plates, CT36-6 trowels, GP2600 portable generators, PG3 dewatering pumps, BFS floor saws, and RS600 walk-behind rollers. Sourced directly from Wacker Neuson, this crankcase assembly meets the exact specifications of the original part it replaces. It is a direct-fit replacement that installs into compatible engines without modification, keeping your machine running as it was built to run. Confirm your model number against the fitment list before ordering to ensure compatibility.
Key Features
- Genuine OEM Structural Integrity — Cast and machined to the same tolerances as the original, ensuring proper bore alignment, seal surface finish, and bearing seat dimensions critical to crankcase function.
- Direct-Fit Assembly — A complete crankcase unit with all mounting points, gasket mating surfaces, and internal passages intact, dropping straight into the engine in place of the original.
- Broad Equipment Compatibility — Fits VP and WP series vibratory plates, CT36-6 power trowels, GP2600 generators, PG3 dewatering pumps, BFS and BFS X floor saws, and RS600 walk-behind rollers across multiple catalog generations.
- Engine Sealing and Pressure Retention — A correctly seated crankcase maintains the oil and compression seal needed for consistent engine output; a cracked or warped housing leads to oil loss, blow-by, and rapid internal wear.
- Fuel System Safety Compliance — As the primary engine housing, a sound crankcase prevents oil and fuel vapor leaks that can create fire and inhalation hazards on the worksite.
The crankcase is the structural core of a small engine — it houses the crankshaft, supports the cylinder bore, and contains the oil supply that lubricates all rotating components. It keeps the internal assembly aligned under the mechanical stress of operation and maintains the sealed environment that allows combustion and lubrication to function correctly. When a crankcase cracks, warps, or develops a compromised gasket surface, the engine loses oil containment and structural rigidity, leading to accelerated bearing wear, loss of power, and eventual engine failure if not addressed.
Part Details
| Part Number | 5000205108 |
|---|---|
| Old Part Number | 0205108 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Crankcase Complete |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Premium Portable Generator | GP2600 | 5000620088, 5000620116 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Floor Saw | BFS 12 | 5000630092 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
