The Wacker Neuson Clamp is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including CT36 and CT48 walk-behind concrete power trowels, BFS floor saws, WP and VP vibratory plate compactors, BPU reversible vibratory plates, and PDT, PDI, PG, and PG series diaphragm and dewatering pumps. As a direct OEM replacement, part number is manufactured to the same specifications as the original hardware installed at the factory. Whether you are servicing a concrete finishing machine, a compaction plate, or a pump, this clamp delivers the secure, reliable hold the application demands. Always verify your model number against the fitment list before ordering to confirm compatibility.
Key Features
- Genuine OEM Construction: — Manufactured to the same material and dimensional tolerances as the original, ensuring the clamp delivers the correct clamping force without distortion or premature failure.
- Direct-Fit Replacement: — Engineered to match original mounting points and fastener interfaces across all listed models, so installation follows the standard service procedure without modification.
- Broad Cross-Family Fitment: — Compatible with CT36 and CT48 trowels, BFS floor saws, WP and VP vibratory plates, BPU reversible plates, and PDT, PDI, and PG series pumps — one part number covering multiple machine families.
- Secure Hold Under Operating Stress: — A correctly functioning clamp maintains tight connections between hoses, housings, or components that are subject to vibration and mechanical load; a worn or cracked clamp can allow slippage, leaks, or detachment during operation.
- Verified OEM Part Number: — Sourced directly under Wacker Neuson part number 5000205135, eliminating guesswork and ensuring you receive the correct component for your specific machine.
A clamp is a fastening component used to secure hoses, cables, guards, or structural sections firmly in place on the machine. On equipment that operates under continuous vibration — such as vibratory plate compactors, floor saws, and diaphragm pumps — clamps are subject to repeated stress cycles that can cause them to loosen, crack, or lose clamping force over time. A failed or missing clamp can allow connected components to shift or separate, leading to fluid leaks, component wear, or loss of function. Replacing a worn clamp promptly with the correct OEM part restores the secure connection the machine relies on to operate as intended.
Part Details
| Part Number | 5000205135 |
|---|---|
| Old Part Number | 0205135 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Clamp |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-9-V Trowel | CT36-9-V | 5000009447, 5000620834 |
| CT36-9 Trowel | CT36-9 | 5000009444, 5000620833 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| CT48-9 Trowel | CT48-9 | 5000009453, 5000620838 |
| 50mm/2in Diaphragm Trash Pump | PDT2 | 5000009494, 5000620770 |
| 75mm/3in Diaphragm Trash Pumps | PDT3 | 5000009495, 5000620774 |
| PG2 Dewatering Pump | PG2 | 5000009496, 5000009497 |
| PG3 Dewatering Pump | PG3 | 5000009498, 5000009499 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| BFS 935 SAW,BASIC | BFS 935B | 5000008911 |
| Floor Saw | BFS20D | 5000630008 |
| BFS20 | BFS20 | 5000630129 |
| Floor Saw | BFS18D | 5000630132 |
| BFS18 | BFS 18 | 5000630099 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| BFS 914B SAW | BFS 914B | 5000610093 |
| Floor Saws | BFSX20D | 5000630134 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saws | BFSX18D | 5000630133 |
| Floor Saw | BFSX18 | 5000630249 |
| Floor Saw | BFSX20 | 5000630250 |
| Floor Saws | BFS 614B | 5000009526 |
| Petrol Floor Saw BFS 940W | BFS 940W | 5000610328, 5100004005 |
| 50mm/2in Diaphragm Trash Pump | PDI2 | 5000009489 |
| 75mm/3in Diaphragm Trash Pump | PDI3 | 5000009491, 5000009492 |
| Petrol Floor Saw BFS 1350B | BFS 1350W | 5100000090, 5100004013 |
| Petrol Floor Saw BFS 1350BZ | BFS 1350Wz | 5100000092, 5100004014 |
| Petrol Floor Saw BFS 1345B | BFS 1345W | 5100001158, 5100004009 |
| Petrol Floor Saw BFS 1345BZ | BFS 1345Wz | 5100001159, 5100004010 |
| Floor Saw | BFS 914W | 5100004003 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
