The Wacker Neuson J Bolt M6 is a genuine OEM fastener designed for a wide range of Wacker Neuson compaction, pumping, and heating equipment, including the DPU, DPS, PT3H, DS70, and HSH350 series. As a direct factory-sourced component, the meets the original design tolerances and thread specifications Wacker Neuson engineers to for secure, lasting assembly. This bolt is confirmed across dozens of models — from vibratory plates like the DPU 2540H and DPU 3750Hts to surface heaters like the E1100 and HSH350 — making it a high-demand service part for contractors and rental fleets alike. Always verify your model number before ordering to ensure a correct match.
Key Features
- Correct M6 Thread Specification — Manufactured to the exact M6 thread pitch and J-hook geometry required for proper engagement and clamping load in Wacker Neuson assemblies.
- Genuine OEM Sourcing — Supplied directly through the Wacker Neuson parts network, ensuring the bolt matches the original hardware spec installed at the factory.
- Broad Cross-Model Compatibility — Fits DPU 2540H through DPU 3760Hets vibratory plates, DPS1850H and DPS2050H series compactors, PT3H trash pumps, DS70 vibratory rammer, and E1100 and HSH350 surface heaters.
- Structural Integrity Where It Counts — A correctly torqued J Bolt M6 keeps panels, guards, and mounted components firmly secured; a stripped or missing bolt can allow critical components to shift or vibrate loose during operation.
- Drop-In Hardware Replacement — Installs without modification, using standard M6 tooling already on hand — no redrilling, retapping, or adapter hardware needed.
A J bolt is a threaded fastener shaped like the letter J, with a curved hook end and a straight threaded shank. In construction equipment, J bolts are commonly used to anchor brackets, secure housings, and fasten panels or guards in place where a conventional straight bolt cannot reach or would not hold as effectively. When a J bolt stretches, corrodes, or loses thread engagement, the component it secures can loosen under vibration — a common operational condition on compaction equipment — leading to rattling, misalignment, or damage to surrounding parts. Replacing a worn or damaged J bolt with the correct OEM hardware restores the clamping force and keeps assemblies tight through heavy-duty use cycles.
Part Details
| Part Number | 5000206629 |
|---|---|
| Old Part Number | 0206629 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | J Bolt M6 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Hydronic Surface Heater | HSH350 | 5000620254, 5200001677 |
| PT3H Pump | PT3H | 5000009100, 5000009103, 5100014963, 5100014964 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5200001676 |
| DPU2540H | DPU 2540H | 5000610035 |
| DPU 2550H | DPU 2550H | 5000610036 |
| DPU 2560H | DPU 2560H | 5000610037 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038 |
| DPU 3050H | DPU 3050H | 5000610039 |
| DPU 3060H | DPU 3060H | 5000610040 |
| DPU 3070H | DPU 3070H | 5000610041 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DS70H Vibratory Rammer, 13" Plastic Shoe EPA | DS70 | 5200010976 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033 |
| DPS1850H Basic | DPS1850H Basic | 5000610032 |
| DPS1850H Vario | DPS1850H Vario | 5000610034 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
| DPU5545Heh US | DPU5545Heh US | 5100063122 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
