The Wacker Neuson Switch is a genuine OEM Switch designed for a wide range of Wacker Neuson equipment, including PT3 centrifugal trash pumps, VP single-direction vibratory plates, BPU reversible vibratory plates, and BFS floor saws. As a factory-sourced component, the is manufactured to the exact specifications required by Wacker Neuson for correct operation across all listed models. Verified fitment spans the VP1135R, VP1340R, VP1550R, VP2050R, VP50X, VP60X, BPU 2540, BPU 3050, BFS12, and BFS1214 series, among others. When your original switch fails or becomes damaged, this direct OEM replacement restores proper electrical control function without the need for adaptation or modification.
Key Features
- Genuine OEM Electrical Specification — Sourced directly from Wacker Neuson, this switch meets the precise switching capacity, contact rating, and circuit compatibility required for correct operation across all covered equipment families.
- Drop-In Replacement — Engineered to match the original mounting configuration and wiring interface, the 5000207864 installs in place of the factory switch with no rewiring or bracket modification.
- Broad Multi-Family Fitment — Covers PT3 trash pumps, VP single-direction vibratory plates (11 kN through 60 kN), BPU reversible vibratory plates, BFS floor saws, and select additional Wacker Neuson models — confirm your machine number before ordering.
- Restores Reliable On/Off Control — A worn or failed switch can prevent the machine from starting, cause intermittent shutdowns, or leave the operator without a safe means of stopping the equipment — replacing it promptly returns full operational control.
- Electrical Safety Compliance — As the primary operator-accessible control on many of these machines, using a correctly rated OEM switch ensures the circuit interruption behavior matches the original design intent, which matters for both operator safety and equipment protection.
The switch on a piece of power equipment serves as the primary electrical control point — it completes or interrupts the circuit that starts, runs, or stops the engine or motor. On vibratory plates, floor saws, and trash pumps, the switch must reliably handle the electrical load of the ignition or motor circuit while withstanding vibration, moisture, and jobsite conditions. A failing switch can present as hard starting, failure to shut down, or intermittent power loss — all of which affect both productivity and safety on the worksite.
Part Details
| Part Number | 5000207864 |
|---|---|
| Old Part Number | 0207864 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Switch |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT3 Pump | PT3 | 5000009321, 5000009322, 5000009323 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Direction Plate | AP1135R | 5000009518 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| Floor Saw | BFS 12 | 5000630092 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
