The Wacker Neuson Throttle Lever is a genuine OEM component designed for a wide range of Wacker Neuson vibratory plates, trowels, floor saws, rollers, and pumps, including the VP Series, WP Series, CT36-6, BFS Floor Saws, RS600 Walk-Behind Rollers, and PT3 Pump. As a direct OEM replacement, part is manufactured to the exact tolerances and material specifications of the original part — ensuring the throttle responds with the same precision and feel as it did from the factory. This lever fits across an extensive lineup of Wacker Neuson equipment, making it a versatile stocking part for fleet operators and service shops alike. Verify your model number against the fitment list to confirm compatibility before ordering.
Key Features
- Genuine OEM Throttle Actuation Accuracy — Manufactured by Wacker Neuson to the original pivot geometry and engagement spec, delivering consistent throttle response and travel every time the operator opens or closes the control.
- Direct Swap Installation — Mounts to the existing throttle linkage and control housing with no drilling, cutting, or hardware substitution required — the lever seats and secures exactly as the original did.
- Broad Cross-Model Fitment — Compatible with VP and WP Series vibratory plates, CT36-6 power trowels, BFS floor saws, RS600 walk-behind rollers, PT3 pumps, and additional Wacker Neuson equipment — a single part number that covers a wide range of machines on your fleet list.
- Positive Engine Speed Control — A fully functional throttle lever lets the operator move fluidly between idle and full power, maintaining proper compaction force, blade speed, or cutting rate depending on the machine. A worn or broken lever produces erratic engine speed and inconsistent machine output.
- Operator Safety Relevance — Because the throttle lever directly controls engine speed, a cracked, loose, or binding lever can result in unintended acceleration or an inability to reduce power quickly — making prompt replacement with a correct OEM part important for safe operation.
The throttle lever is the manual control link between the operator and the engine's carburetor or throttle body. When the operator moves the lever, it actuates the throttle cable or linkage rod, increasing or decreasing fuel and air flow to raise or lower engine RPM. On compaction plates, trowels, and saws, precise speed control directly affects work quality and machine longevity — running at an incorrect RPM can cause poor compaction, uneven finishing, or accelerated engine wear. When the lever cracks, binds, or loses its detent, the operator loses the ability to hold a consistent engine speed, which compromises both output quality and safe control of the machine.
Part Details
| Part Number | 5000208305 |
|---|---|
| Old Part Number | 0208305 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Throttle Lever |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| PT3 Pump | PT3 | 5000009321 |
| CT36-6 Trowel | CT36-6 | 5000009443, 5000620830 |
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| WP1540W VIBROPLATE | WP1540W | 5000009326, 5000009547, 5000630066 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| WP1540 VIBROPLATE | WP1540 | 5000009327, 5000630067 |
| Value Vibratory Plate | VP2050I | 5000009541 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Direction Plate | AP1135R | 5000009518 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Floor Saw | BFS 12 | 5000630092 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saws | BFS 614B | 5000009526 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
