The Wacker Neuson Electric Wire is a genuine OEM component designed for a wide range of Wacker Neuson VP series vibratory plate compactors, BFS series floor saws, BPU series reversible vibratory plates, and select generator and demolition equipment. As a direct factory replacement, this wire is produced to the same specifications as the original part installed at the time of manufacture, ensuring a correct, dependable fit across all compatible models. Compatible equipment includes the VP1135R, VP1340R, VP1340RW, VP1550R, VP1550RW, VP2050R, VP50X, VP60X, BFS12, BFS16, BPU 2540, BPU 3050, and additional models in the Wacker Neuson lineup. Keeping the correct wire in service helps maintain proper electrical function and prevents interruptions during operation.
Key Features
- Genuine OEM Conductivity Spec: — Manufactured to Wacker Neuson's original electrical specification, ensuring correct current-carrying capacity and insulation rating for each compatible machine.
- Drop-In Compatibility: — Engineered to match the original routing, connector type, and length so it installs directly without modification to harness brackets or terminals.
- Broad Model Coverage: — A single part number spans the VP1135R, VP1340RW, VP1550R, VP2050R, VP50X, VP60X, BFS12, BFS16, BPU 2540, BPU 3050, and additional Wacker Neuson models.
- Protects Electrical Integrity: — A damaged or degraded wire can cause intermittent faults, failed starts, or complete electrical failure; replacing it with the correct OEM part restores stable, uninterrupted electrical flow.
- Electrical Safety Compliance: — Using a correctly rated OEM wire helps ensure the machine's electrical circuit operates within its designed safety parameters, particularly important on equipment with electric-start or powered control systems.
The electric wire is part of the machine's electrical circuit, responsible for carrying current between components such as the ignition system, motor, control switches, or sensors depending on the specific model. When this wire becomes frayed, corroded, or breaks down, it can interrupt the electrical signal or cause shorts that prevent the machine from starting or operating correctly. Replacing a worn wire with the correct OEM part restores a clean, fully rated electrical connection and keeps all downstream electrical components functioning as intended.
Part Details
| Part Number | 5000208324 |
|---|---|
| Old Part Number | 0208324 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Electric Wire |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Value Vibratory Plate, 11kN, 3 50mm/13.8in | VP1135R | 5000008709, 5000009071, 5000630061 |
| Value Vibratory Plate, 11 kN, 356mm/14in | VP1135RW | 5000009251, 5000009512 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340RW | 5000009034 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550RW | 5000009030 |
| Value Vibratory Plate, 13 kN, 400mm/15.5in | VP1340R | 5000009033 |
| Value Vibratory Plate, 15 kN, 500mm/19.5in | VP1550R | 5000009029, 5000630056 |
| Value Vibratory Plate, 20 kN, 500mm/19.5in | VP2050R | 5000009088, 5000630063 |
| Vibratory Soil Plate, 60 kN | VP60X | 5000009533 |
| Vibratory Soil Plate, 50 kN | VP50X | 5000009531 |
| Single Direction Plate | VPR70 | 5000006909 |
| VP50Xw-VIBROPLATE | VP50Xw | 5000630094 |
| VP60Xw-VIBROPLATE | VP60Xw | 5000630095 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Direction Plate | AP1135R | 5000009518 |
| Single Direction Asphalt Plate | VP2050RW | 5000009511 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| Modular Internal Vibrators | RD 3.7 | 5000006908 |
| Floor Saw | BFS16 | 5000630098 |
| Value Vibratory Plate, 11kN 356mm/14in | VP1135R-AU | 5000630102 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Gasoline Reversible Vibratory Plate | BPU 3050 | 5000008955 |
| Floor Saw | BFS 90R | 5000009522 |
| Floor Saw | BFSX 90R | 5000009525 |
| Floor Saw | BFS 12 | 5000630092 |
| Gas Reversible Vibratory Plate ,25 kN,40cm/16in | BPU 2540 | 5000008954 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saw | BFSX16 | 5000630248 |
| Generator GH 3500 | GH3500 | 5000610079 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
