The Wacker Neuson Muffler Gasket is a genuine OEM component designed for DS70 and DS720 Vibratory Rammers, DPU4045Y Vibratory Plates, and related VPY70 and VP2050Y compaction equipment. Sourced directly from Wacker Neuson, this part carries the same specification as the gasket installed at the factory, ensuring a correct seal between the muffler and the exhaust port. It is confirmed to fit a wide range of DS70, DS720, and DPU4045Y series machines, covering both 280 mm/11 in and 330 mm/13 in shoe configurations as well as multiple regional variants including US and EU spec units.
Key Features
- OEM Sealing Integrity — Manufactured to Wacker Neuson's original material and compression specification, so the muffler-to-exhaust joint seals correctly under repeated heat cycling and high-vibration operating conditions.
- Direct Drop-In Replacement — Matches the original gasket profile exactly, allowing straightforward installation against the muffler flange without trimming or shimming.
- Broad Compaction Equipment Fitment — Compatible with DS70 and DS720 Vibratory Rammers, DPU4045Y and DPU40Y Vibratory Plates, VPY70 Single Direction Plates, VP2050Y Vibratory Soil Plates, and YD 3.5 / D3.5Y Modular Internal Vibrators.
- Exhaust Leak Prevention — A failed or deteriorated muffler gasket allows hot exhaust gases to escape at the joint, reducing back-pressure control and exposing the operator to fumes; replacing it restores proper exhaust routing.
- Emissions and Safety Compliance — Maintaining an intact exhaust seal is essential on EPA-compliant DS70 and DS720 models; using the correct OEM gasket supports the machine's certified exhaust configuration.
The muffler gasket forms the sealing interface between the engine's exhaust port and the muffler body, preventing hot combustion gases from escaping before they reach the silencing chamber. When this gasket deteriorates or burns through, exhaust gases leak at the joint, which can create audible blowing sounds, expose operators to fumes at close working range, and cause heat damage to surrounding components over time. Replacing a worn muffler gasket promptly restores the integrity of the exhaust system and keeps the engine running at its correct back-pressure balance.
Part Details
| Part Number | 5000210617 |
|---|---|
| Old Part Number | 0210617 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Muffler Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620052, 5000620053, 5000620054, 5000620911, 5000009342, 5000009402, 5000009403 |
| Diesel Vibratory Rammer, 330mm /13in Shoe | DS720 | 5000008203, 5000008200, 5000009059, 5000009060, 5000009309 |
| Single Direction Plate | VPY70 | 5000007001 |
| Modular Internal Vibrators | YD 3.5 | 5000007003 |
| Vibratory Soil Plate, 20 kN | VP2050Y | 5000009515 |
| vibration plate DPU 4045Y | DPU 4045Y | 5000610027 |
| DPU45Yeh US | DPU45Yeh US | 5100063121 |
| V.Plate DPU 4045Ye | DPU 4045YE | 5000610181 |
| DPU4045Yeh | DPU4045Yeh | 5100009662 |
| DPU4045Yeh LRC | DPU4045Yeh LRC | 5100063118 |
| DPU4045Yehzf LRC | DPU4045Yehzf LRC | 5100063120 |
| DPU40Yeh US | DPU40Yeh US | 5100063124 |
| DPU40Yeh EU | DPU40Yeh EU | 5100068379 |
| DPU45Yeh EU | DPU45Yeh EU | 5100068380 |
| Vibratory Plate DPU 4045Ye | DPU 4045Ye | 5000610350 |
| DPU4045YE | DPU4045Ye | 5100016954 |
| DS70 | DS70Y 13in | 5100060830, 5100030612 |
| Vibrationsplatte | DPU4045Yehzf | 5100022113 |
| DPU4045Yeh EU | DPU4045Yeh EU | 5100063123 |
| DS70 | DS70Y 13in LRC | 5100065736 |
| Modular Internal Vibrators | D3.5Y2 | 5100072404 |
| Modular Internal Vibrators | D3.5Y3 | 5100072406 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
