The Wacker Neuson Compression Spring is a genuine OEM Compression Spring designed for the RCP-12, RCP-16, and RCE-16 series rebar cutters. Sourced directly from Wacker Neuson, this part carries the same specification as the component installed at the factory, ensuring a direct, confidence-building replacement. It fits across multiple voltage and frequency variants within the RCP and RCE lines, including 50 Hz, 60 Hz, and 115 V models. If your rebar cutter is showing sluggish blade return, incomplete cutting cycles, or inconsistent jaw action, this is the part to address it.
Key Features
- Calibrated Spring Tension: — Manufactured to the exact load and deflection spec required for consistent blade return in Wacker Neuson rebar cutters — not a generic spring substitute.
- Genuine OEM Part: — Supplied by Wacker Neuson under part number 5000216860, so you get the correct material grade and coil geometry for this application.
- Drop-In Replacement: — Seats directly into the existing spring pocket without modification, maintaining the correct preload alignment with the cutting mechanism.
- Broad RCP and RCE Series Coverage: — Fits RCP-12 and RCP-16 pneumatic models plus RCE-16 electric models across 50 Hz, 60 Hz, and 115 V configurations.
- Restores Cutting Cycle Consistency: — A worn or fatigued compression spring causes incomplete jaw return and misfires; replacing it brings the cutter back to full, repeatable stroke performance.
- Electrical Safety Compliance: — Using the correct OEM spring in electric RCE-16 models ensures the cutting mechanism operates within the designed cycle parameters, protecting both the motor and the operator.
A compression spring in a rebar cutter is responsible for returning the cutting jaw or blade mechanism to its open position after each cut. It stores mechanical energy during the cutting stroke and releases it to reset the jaws, allowing the tool to complete a clean, repeatable cycle. When this spring weakens, cracks, or loses its rated load capacity, the jaws fail to fully open between strokes — leading to jammed material, incomplete cuts, and added strain on the motor or pneumatic drive. Replacing it with the correct-specification part restores the full cutting cycle and protects the surrounding drive components from the stress of fighting a failed spring.
Part Details
| Part Number | 5000216860 |
|---|---|
| Old Part Number | 0216860 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Compression Spring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Rebar Cutter RCP-12/230 50 Hz | RCP-12/230 50 Hz | 5000610197 |
| RCP-12/120 12MM CUTTING | RCP-12/120 60 Hz | 5000610198 |
| Rebar Cutter RCP-16/230 50 Hz | RCP-16/230 50 Hz | 5000610199 |
| RCP-16/120 16MM CUTTING | RCP-16/120 60 Hz | 5000610200 |
| Rebar Cutter RCE-16/230 | RCE-16/230 | 5000610207 |
| RCE-16/120 16MM CUTTING | RCE-16/120 | 5000610208 |
| Rebar Cutter RCP-12/115 GB | RCP-12/115 | 5000610213 |
| Rebar Cutter RCP-16/115 GB | RCP-16/115 | 5000610214 |
| Rebar Cutter RCE-16/115 GB | RCE-16/115 | 5000610218 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
