The Wacker Neuson Cutting Blade Kit is a genuine OEM Cutting Blade Kit designed for the RCP-20/230 50 Hz, RCP-20/120, and RCP-20/115 series rebar cutters. Sourced directly from Wacker Neuson, this kit delivers the exact blade geometry and hardness specification required to maintain clean, precise cuts through rebar stock. Genuine OEM designation means every component in the kit meets the original design tolerances — keeping your cutter performing as it left the factory. Confirm your model number against the fitment list before ordering to ensure a correct, direct swap.
Key Features
- OEM Blade Grade and Geometry — Genuine Wacker Neuson construction ensures correct cutting-edge hardness and profile for consistent, burr-free rebar cuts rather than worn-edge tearing or blade deflection.
- Complete Kit Format — Supplied as a matched blade set so all cutting components are replaced together, eliminating the uneven wear that occurs when only one blade is swapped out.
- Direct Drop-In Replacement — Engineered to the original mounting dimensions of the RCP-20 platform, so the blades seat and fasten using the existing hardware and alignment points.
- Verified Fitment for RCP-20 Series Rebar Cutters — Confirmed compatible with the RCP-20/230 50 Hz, RCP-20/120, and RCP-20/115 models, covering the core range of Wacker Neuson 20 mm rebar cutters.
- Restored Cutting Capacity — Worn or chipped blades force the cutter to work harder, straining the drive mechanism and producing ragged cuts; fresh OEM blades restore rated cutting force and clean shear performance.
- Operator Safety Compliance — Cutting blades are a safety-critical component; using genuine Wacker Neuson 5000216987 blades ensures the shear action stays within designed load limits, reducing the risk of blade fracture or unpredictable part ejection under load.
The cutting blades in a rebar cutter are the primary shear components that sever the steel bar in a single, controlled stroke. They work as a matched pair — one blade is fixed and one moves under hydraulic or electric force — so the bar is cleanly sheared rather than bent or crushed. As the blades accumulate cuts, their edges wear and chip, which increases the force required to complete each cut, places extra stress on the drive mechanism, and produces rough or incomplete cuts. Replacing the blades as a complete kit with part number 5000216987 restores the original shear clearance and edge sharpness, returning the tool to its rated cutting performance on rebar up to the machine's specified diameter.
Part Details
| Part Number | 5000216987 |
|---|---|
| Old Part Number | 0216987 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Cutting Blade Kit |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Rebar Cutter RCP-20/230 50 Hz | RCP-20/230 50 Hz | 5000610201 |
| RCP-20/120 20MM CUTTING/BENDNG | RCP-20/120 | 5000610202 |
| Rebar Cutter RCP-20/115 GB | RCP-20/115 | 5000610215 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
