The Wacker Neuson Compensating Ring is a genuine OEM component designed for the RCP and RCE series rebar cutters, covering models from the RCP-12 through RCP-32 and RCE-16 through RCE-25 across both 50 Hz and 60 Hz configurations. Sourced directly from Wacker Neuson, this part meets the exact specifications of the original component it replaces. Whether you're servicing a RCP-16/120, RCP-25/230, RCE-20/115, or any other compatible model in the lineup, part number delivers the correct fit without guesswork. Keeping the cutting mechanism operating within its designed tolerances depends on having the right compensating ring in place.
Key Features
- OEM Dimensional Accuracy — Manufactured to the exact tolerances required by Wacker Neuson's rebar cutter cutting mechanism, ensuring the ring seats and functions correctly within the tool's blade and drive assembly.
- Direct Drop-In Replacement — Engineered to install in the same position as the original, fitting the same mounting geometry across all compatible RCP and RCE model variants.
- Broad Series Compatibility — Fits the full RCP-12 through RCP-32 and RCE-16 through RCE-25 rebar cutter families, spanning 50 Hz, 60 Hz, and 115 V GB configurations.
- Restores Cutting Precision — A worn or damaged compensating ring causes blade misalignment and inconsistent cuts; replacing it with the correct OEM part brings cutting performance back to spec.
- Genuine Wacker Neuson Part — Backed by Wacker Neuson's OEM supply chain, so the material grade, geometry, and durability match what was originally installed at the factory.
A compensating ring in a rebar cutter plays a critical role in maintaining the correct alignment and clearance between the cutting blades during each cut cycle. It absorbs and distributes the mechanical forces generated when the blades shear through steel rebar, preventing excessive wear and keeping the cut clean and consistent. When the compensating ring wears out or becomes damaged, you may notice increased blade play, ragged cuts, or added strain on the drive mechanism — all signs that replacement is needed before further damage occurs.
Part Details
| Part Number | 5000217032 |
|---|---|
| Old Part Number | 0217032 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Compensating Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Rebar Cutter RCP-12/230 50 Hz | RCP-12/230 50 Hz | 5000610197 |
| RCP-12/120 12MM CUTTING | RCP-12/120 60 Hz | 5000610198 |
| Rebar Cutter RCP-16/230 50 Hz | RCP-16/230 50 Hz | 5000610199 |
| RCP-16/120 16MM CUTTING | RCP-16/120 60 Hz | 5000610200 |
| Rebar Cutter RCP-20/230 50 Hz | RCP-20/230 50 Hz | 5000610201 |
| RCP-20/120 20MM CUTTING/BENDNG | RCP-20/120 | 5000610202 |
| Rebar Cutter RCP-25/230 | RCP-25/230 | 5000610203 |
| RCP-25/120 25MM CUTTING/BENDNG | RCP-25/120 | 5000610204 |
| Rebar Cutter RCP-32/230 | RCP-32/230 | 5000610205 |
| RCP-32/120 32MM CUTTING | RCP-32/120 | 5000610206 |
| Rebar Cutter RCE-16/230 | RCE-16/230 | 5000610207 |
| RCE-16/120 16MM CUTTING | RCE-16/120 | 5000610208 |
| Rebar Cutter RCE-20/230 | RCE-20/230 | 5000610209 |
| RCE-20/120 20MM CUTTING | RCE-20/120 | 5000610210 |
| Rebar Cutter RCE-25/230 | RCE-25/230 | 5000610211 |
| RCE-25/120 25MM CUTTING | RCE-25/120 | 5000610212 |
| Rebar Cutter RCP-12/115 GB | RCP-12/115 | 5000610213 |
| Rebar Cutter RCP-16/115 GB | RCP-16/115 | 5000610214 |
| Rebar Cutter RCP-20/115 GB | RCP-20/115 | 5000610215 |
| Rebar Cutter RCP-25/115 GB | RCP-25/115 | 5000610216 |
| Rebar Cutter RCE-16/115 GB | RCE-16/115 | 5000610218 |
| Rebar Cutter RCE-20/115 (GB) | RCE-20/115 | 5000610219 |
| Rebar Cutter RCE-25/115 (GB) | RCE-25/115 | 5000610220 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
