The Wacker Neuson Hex Head Cap Screw is a genuine OEM fastener designed for the RCP-20, RCP-25, and RCE-25 series rebar cutters. Sourced directly from Wacker Neuson, this part meets the exact specifications of the original hardware installed at the factory. It is confirmed to fit both 50 Hz and 120 V variants across the RCP and RCE series, including the RCP-20/230, RCP-20/120, RCP-25/230, RCP-25/120, RCE-25/230, RCE-25/120, and their GB-spec 115 V counterparts. When a fastener like this wears, strips, or goes missing, replacing it with the correct OEM part ensures structural integrity is fully restored.
Key Features
- Genuine OEM Fastener Grade — Manufactured to Wacker Neuson's specified torque and thread tolerances for this application, so the joint holds under the mechanical stress of rebar cutting cycles.
- Drop-In Hardware Replacement — Threaded to the original dimensions, this cap screw seats and torques exactly as the factory hardware did — no chasing threads or sourcing substitutes.
- Broad RCP and RCE Series Coverage — A single part number covers RCP-20 and RCP-25 cutting/bending models as well as RCE-25 cutting models across 115 V, 120 V, and 230 V configurations.
- Structural Fastening Integrity — A correct-spec hex head cap screw keeps critical assemblies properly clamped and aligned; an incorrect or worn fastener can allow component shift that affects cutting accuracy and machine longevity.
- Torque-Critical Safety Compliance — On power cutting equipment, fastener torque specifications are safety-relevant; using an OEM-spec replacement ensures the assembly meets the designed clamping load and does not back out under vibration.
A hex head cap screw is a threaded fastener used to clamp and secure structural or mechanical components together within an assembly. On electric rebar cutters like the RCP and RCE series, these fasteners hold housings, guards, and internal mechanisms in their correct positions while the machine operates under significant cutting loads and vibration. When a cap screw is stripped, under-torqued, or replaced with an incorrect grade or thread pitch, it can allow movement between clamped parts, leading to accelerated wear, misalignment, or in severe cases, component separation during operation.
Part Details
| Part Number | 5000217039 |
|---|---|
| Old Part Number | 0217039 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Hex Head Cap Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Rebar Cutter RCP-20/230 50 Hz | RCP-20/230 50 Hz | 5000610201 |
| RCP-20/120 20MM CUTTING/BENDNG | RCP-20/120 | 5000610202 |
| Rebar Cutter RCP-25/230 | RCP-25/230 | 5000610203 |
| RCP-25/120 25MM CUTTING/BENDNG | RCP-25/120 | 5000610204 |
| Rebar Cutter RCE-25/230 | RCE-25/230 | 5000610211 |
| RCE-25/120 25MM CUTTING | RCE-25/120 | 5000610212 |
| Rebar Cutter RCP-20/115 GB | RCP-20/115 | 5000610215 |
| Rebar Cutter RCP-25/115 GB | RCP-25/115 | 5000610216 |
| Rebar Cutter RCE-25/115 (GB) | RCE-25/115 | 5000610220 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
