The Wacker Neuson Retaining Ring is a genuine OEM component designed for a wide range of Wacker Neuson equipment, including DPU reversible vibratory plates, BFS gasoline and diesel floor saws, M Series electrical power units for internal vibrators, and the RS800H single drum vibratory roller. As a genuine OEM part, is manufactured to the exact tolerances required by the original design, ensuring a correct fit without rework or modification. This retaining ring serves a critical retention function across multiple machine families, making it a high-demand stocking part for service shops and contractors running mixed Wacker Neuson fleets. Always verify your model number against the fitment list before ordering to confirm compatibility.
Key Features
- Genuine OEM Snap-Fit Tolerancing — Manufactured to Wacker Neuson's original dimensional spec, ensuring the ring seats and retains correctly in its groove without play or slippage.
- Direct-Install Replacement — Drops into the existing groove position on supported models with no machining or adaptation needed — swap out and reassemble.
- Broad Multi-Family Fitment — Compatible across DPU reversible vibratory plates, BFS floor saws, M Series electrical power units for internal vibrators, and the RS800H single drum vibratory roller.
- Maintains Shaft and Component Position — A correctly functioning retaining ring locks bearings, shafts, or assemblies axially in place; a worn or missing ring allows components to shift, causing accelerated wear and potential machine failure.
- High-Volume Service Part — With fitment spanning dozens of models across multiple equipment families, this is a practical part to keep on the shelf for fast turnaround during routine service or field repair.
A retaining ring — also called a snap ring or circlip — is a fastening component that seats into a machined groove on a shaft or inside a bore to hold another component, such as a bearing, bushing, or gear, in its correct axial position. Without it, rotating or reciprocating parts can migrate along the shaft during operation, leading to misalignment, uneven load distribution, and premature failure of adjacent components. When a retaining ring becomes deformed, corroded, or lost during disassembly, replacing it promptly with the correct OEM part is essential to restoring proper component retention and preventing secondary damage to the surrounding assembly.
Part Details
| Part Number | 5002001036 |
|---|---|
| Old Part Number | 2001036 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Retaining Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Drum Vibratory Roller | RS800H | 5000006583 |
| Electrical Power Unit for Inte rnal Vibrator | M3000/230 | 5000005800 |
| Electrical Power Unit | M2000/120 | 5000007653 |
| Electrical Power Unit for Inte rnal Vibrator | M1000/230 | 5000005041 |
| Electrical Power Unit for Inte rnal Vibrator | M1000/120/nonCUL | 5000005843 |
| Electrical Power Unit for Inte rnal Vibrator | M3000/120/nonCUL | 5000005845 |
| Electrical Power Unit for Inte rnal Vibrator | M2000/115/15A | 5000006305 |
| Electrical Power Unit | M2000/120/nonCUL | 5000007159 |
| Electrical Power Unit for Inte rnal Vibrator | M1000/230/RFI | 5000005494 |
| Electrical Power Unit for Inte rnal Vibrator | M2000/230/RFI | 5000005495 |
| Electrical Power Unit for Inte rnal Vibrator | M2000/230/n Gr | 5000006551 |
| M3000/230/RFI | M3000/230/RFI | 5000006590 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| Reversible Vibratory Plate, 70 kN, Remote Control | DPU 7060SC | 5000008927 |
| Petrol Floor Saw BFS 1350L | BFS 1350L | 5000008936 |
| DPU 7060Fe | DPU 7060Fe | 5000610236 |
| DPU7060Fet | DPU 7060Fet | 5000610237 |
| BS30 | BS30 | 5000005216 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751 |
| Floor Saw | BFS 2575KLS | 5000008781 |
| Single Direction Vibratory Pla te, 30kN, 50cm/20in | DPS3050 | 5000006962 |
| Single Direction Vibratory Pla te, 30kN, 60cm/24in | DPS3060 | 5000006963, 5000008422 |
| Reversible Vibratory Plate, 28 kN, 70cm/28in | DPU 2870 | 5000007289 |
| Reversible Vibratory Plate, 29 kN, 70cm/28in | DPU 2970 | 5000007880 |
| Reversible Vibratory Plate, 29 kN, 50cm/20in | DPU 2950 | 5000007881, 5000007884 |
| Vibration Plate DPU 2960 | DPU 2960 | 5000007883 |
| Reversible Vibratory Plate, 70 kN, 60cm/24in | DPU 7060 | 5000007938 |
| Reversible Vibratory Plate, 70 kN, Remote Controll | DPU 7060RC | 5000007939 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Gasoline Floor Saw, Ø 450 cutm atic | BFS 1345K | 5000008711 |
| Diesel Walk-behind Saw | DFS 2075HLS | 5000008782 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
