The Wacker Neuson Retaining Ring is a genuine OEM component designed for a broad range of Wacker Neuson rammers, floor saws, and breakers, including the BS50, BS60, BS70, DS70, BFS735, BFS940, BFS1345, BFS1350, and BH series machines. As a factory-sourced part, the meets the exact dimensional and material specifications set by Wacker Neuson, ensuring a correct fit within the assemblies it secures. This retaining ring is a direct OEM replacement, manufactured to the same standards as the original part that left the factory. Verify your model number against the fitment list before ordering to confirm compatibility with your specific machine configuration.
Key Features
- OEM-Grade Snap Retention: — Manufactured to exact groove-width and radial strength tolerances, ensuring the ring seats and holds securely without deformation under operating loads.
- Drop-In Replacement: — Matches the original ring profile and diameter, allowing installation with standard snap-ring pliers into the existing groove with no rework to surrounding components.
- Broad Model Coverage: — Fits a wide range of Wacker Neuson BS50, BS60, BS70, DS70, BFS735, BFS940, BFS1345, BFS1350, BH 23, BH 24, BH 55, BH 65, and DPU/BPU series machines, among others.
- Critical Assembly Integrity: — Retaining rings prevent axial movement of shafts, bearings, and rotating components; a worn or missing ring can lead to component migration, accelerated wear, and mechanical failure.
- Genuine Wacker Neuson Part: — Sourced directly through the Wacker Neuson OEM supply chain, carrying part number 5002001041 for straightforward cross-referencing against your machine's parts diagram.
A retaining ring — also called a snap ring or circlip — is a fastening element used to hold rotating or sliding components in position along a shaft or within a bore. In rammers, floor saws, and breakers, these rings secure bearings, drive components, and shafts against axial displacement caused by vibration and impact forces generated during operation. When a retaining ring cracks, deforms, or is lost entirely, the components it was holding in place can shift, causing misalignment, uneven wear on adjacent parts, and — in severe cases — sudden mechanical failure of the assembly.
Part Details
| Part Number | 5002001041 |
|---|---|
| Old Part Number | 2001041 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Retaining Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BFS735 | BFS735 | 5100029228, 5100054573 |
| BFS940 | BFS940 | 5100029229, 5100054574 |
| BFS1345 | BFS1345 | 5100029230, 5100054575 |
| BFS1350 | BFS1350 | 5100029231, 5100054576 |
| BS50-2i | BS50-2i | 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5000009332, 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5200003696, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610, 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5000009380, 5000009382, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| BS60-2i | BS60-2i | 5000009339, 5000009393, 5000620906, 5000620613, 5000620614, 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i EU | 5000009412, 5000009414, 5000009416 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401, 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009411, 5000009413 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 | 5000620905, 5000620612, 5200000681, 5200000663, 5200000688, 5200019205, 5000009388, 5000009391, 5100014847, 5200000666 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 330mm /13in Shoe | BS70-2i EU | 5000009426, 5000009428 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 | 5000620907, 5200000671, 5200000670, 5200000684, 5000009397, 5000009399, 5100014905, 5100016652, 5200000676 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4s | 5000620908, 5000620322, 5000620071, 5000620078, 5200000679, 5200000644, 5200000662, 5200000680 |
| BS60 -4s RMR,11 PL SHOE,HA 42 | BS60-4s | 5000620387, 5000620909, 5000620323, 5000620073, 5000620072, 5000620563, 5000620820, 5200000647, 5200000648, 5200000667, 5200000668, 5200000683, 5200000674, 5200000675, 5200011110, 5200011111 |
| Four-cycle Rammer,280mm/11in S hoe | BS60-4s EU | 5000620388, 5000620074, 5000620483, 5000620813, 5000620812, 5000620819, 5000620816, 5200003883, 5200004239 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS50-4s EU | 5000620811 |
| DS70 Vibratory Rammer, 11" Plastic Shoe EPA | DS70 | 5000620049, 5000620050, 5000620052, 5000620053, 5000620054, 5000620911, 5200010976, 5000009342, 5000009402, 5000009403 |
| Four-cycle Vibratory Rammer, 2 20mm/11in Shoe | BS50-4 | 5000620077, 5000620108, 5000009386 |
| Four-stroke Vibratory Rammer, 280mm/11in Shoe | BS60-4 | 5000620109, 5000620110, 5000009340, 5000620000, 5000620051, 5200022984 |
| Single Drum Vibratory Roller | RS800A | 5000006581, 5000630011 |
| Single Drum Vibratory Roller | RSS800A | 5000006582, 5000630012 |
| Vibratory Rammer with 280mm/11 in Shoe | BS500 | 5000007550, 5000008049, 5000008048, 5000009075, 5000009074, 5000008204 |
| Vibratory Rammer with 280mm/11 in Shoe | BS600 | 5000007551, 5000008207, 5000009077, 5000008205, 5000009307 |
| Vibratory Rammer, 280mm/11in S hoe | BS700 | 5000008051, 5000007552, 5000008052, 5000009079, 5000008206, 5000009308 |
| Diesel Vibratory Rammer, 330mm /13in Shoe | DS720 | 5000008203, 5000008200, 5000009059, 5000009060, 5000009309 |
| 280/11in Shoe, Vibratory Ramme r | MS62 | 5200004690 |
| Vibratory Rammer with 254mm/10 in Shoe | BS52Y | 5000007508, 5000008053, 5000008054, 5000009409, 5000007148, 5000007559, 5000007560, 5000007609 |
| 280/11in Shoe, Vibratory Ramme r | MS52 | 5200008222 |
| Variable Speed Vibratory Ramme r, 280mm/11in Shoe | BS650 | 5000008209 |
| Vibratory Rammer, 254mm/10in S hoe | BS500S | 5000009211 |
| Vibratory Rammer, 280mm/11in S hoe | BS600S | 5000009212 |
| 280/11in Shoe, Vibratory Ramme r | MS54 | 5200008223, 5200013518 |
| Electric Rammer 230V | ES52Y | 5000007688, 5000008290 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS600-oi | 5000009166, 5000009262 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-4HO EU | 5000620818 |
| BS 50-4As 280 mm shoe | BS50-4As | 5100015099, 5200018219, 5200018226, 5100027197, 5100025357 |
| BS 60-4As 280 mm shoe | BS60-4As | 5100015123, 5200014910, 5200018232, 5200018231, 5200018233, 5100027198 |
| BS 70-4As 280 mm shoe | BS70-4As | 5100015124, 5100015126, 5100027199 |
| MS64A Vibratory Rammer, 11" | MS64A | 5200014899 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS500-oi | 5000009165, 5000009343 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5000009396, 5100016651 |
| Single Drum Vibratory Roller | RS800H | 5000006583 |
| Oil-injected Rammer, 330mm/13i n Shoe | BS700-oi | 5000009167, 5000009328 |
| Variable Speed Vibratory Ramme r, 280mm/11in Shoe | BS65Y | 5000007567, 5000007566 |
| Gasoline Breaker, tool holder 27x80 | BH 23 | 5000007891, 5000007892, 5000007893, 5000007894, 5000610292, 5000610377, 5000610378, 5000610379, 5000610380, 5000610381, 5000008333 |
| Reversible Vibratory Plate, 50 kN, 45cm/18in | BPU 5045A | 5000008545 |
| Petrol Breaker BH 23 RS | BH 23 RS | 5000008595 |
| BFS12 FLOOR SAW | BFS12 | 5000630000 |
| Single Drum Vibratory Roller ( without engine) | RS800 | 5000006585 |
| V.Plate DPU 5045Heap | DPU 5045H | 5000610046, 5000610052, 5000610047, 5000007862, 5000007936, 5000007965, 5000610045 |
| Gasoline Tie Tamper, tool hold er 27x80 | BH 22 | 5000007890 |
| Petrol Breaker BH 22 | BH 22 RS | 5000007953 |
| Basic floor saw, 450mm/18in | BFS 1345AB | 5000008764, 5000610141 |
| Basic floor saw, ø 450mm/18in | BFS 1345B | 5000008909, 5000610142 |
| BFS 935A SAW,BASIC | BFS 935AB | 5000008910 |
| BFS 935 SAW,BASIC | BFS 935B | 5000008911 |
| V.Plate DPU 4045Hap | DPU 4045H | 5000610044, 5000610051, 5000610064, 5000007888, 5000007935, 5000610043 |
| Walk-behind Rollers | RS600 | 5000630194, 5000630136 |
| BFS1350 | BFS1350 CN | 5100042680 |
| BFS735 | BFS735 CN | 5100042681 |
| DPU5545Heh | DPU5545Heh | 5100009652 |
| DPU5545HEH US | DPU5545Heh US | 5100009653, 5100063122 |
| DPU5545Hehap | DPU5545Hehap | 5100009654 |
| DPU5545Hech | DPU5545Hech | 5100009655, 5100051523 |
| DPU4545Heh | DPU4545Heh | 5100009659 |
| DPU4545HEH US | DPU4545Heh US | 5100009660 |
| Electric Rammer | ES45Y | 5000007164 |
| BH24-BREAKER, 27x80mm round | BH 24 | 5000008937, 5000008993, 5000008994, 5000610293, 5000008992, 5000610342, 5000610382, 5000610383, 5000610384, 5000610385, 5000610386 |
| Petr. Breaker BH24LowV.EE27x80 | BH 24 Low Vib | 5000008995, 5000610082, 5000610083, 5000610081, 5000610343, 5000610388, 5000610389, 5000610390, 5000610391, 5000610392 |
| Gasoline Breaker | BH 24 Low Vib RS | 5000008996, 5000610393 |
| Petrol Breaker BH 23 Loxam | BH 23 Loxam | 5000610296 |
| Floor Saws | BFS1214 | 5000630004, 5000630093 |
| Single Drum Vibratory Roller | RS600A | 5000630010 |
| DPU4545Hech | DPU4545Hech | 5100015429, 5100051522 |
| DPU5545He | DPU5545He | 5100016947 |
| DPU5545Heap | DPU5545Heap | 5100016949 |
| DPU5545Hec | DPU5545Hec | 5100016950 |
| DPU4545He | DPU4545He | 5100016951 |
| DPU4545Hec | DPU4545Hec | 5100016953 |
| 280/11in Shoe, Vibratory Ramme r | ES50 | 5200013514, 5200013515 |
| BS30 | BS30 | 5000005216, 5100037146 |
| Gasoline Floor Saw, Ø 350 | BFS 80 | 5000006654 |
| BFS1350ALS-SAW | BFS 1350ALS | 5000008885, 5000610399 |
| Floor Saw | BFS 130RM | 5000009520 |
| Floor Saw | BFS 130R | 5000009521 |
| Floor Saw | BFS 90R | 5000009522 |
| Floor Saw | BFSX 90R | 5000009525 |
| BFS 1318AB SAW | BFS 1318AB | 5000610091 |
| BFS 914AB SAW | BFS 914AB | 5000610092 |
| BFS 914B SAW | BFS 914B | 5000610093 |
| Floor Saw | BFS 12 | 5000630092 |
| DPU5545H | DPU 5545H | 5100009656, 5000610352 |
| DPU4545H | DPU 4545H | 5100009661, 5000610348 |
| DPU5545HECH US | DPU5545Hech US | 5100016948 |
| DPU4545HECH US | DPU4545Hech US | 5100016952 |
| Single Drum Vibratory Roller | RS800V | 5000007187 |
| Gasoline Floor Saw, Ø 450 (350 ) | BFS 100 | 5000007352 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345AS | 5000008699 |
| Gasoline Floor Saw, 450 drive, cutmatic | BFS 1345ALS | 5000008700 |
| Gasoline Floor Saw, Ø 500 driv e, cutmatic | BFS 1350AS | 5000008752 |
| BFS1350AL-SAW | BFS 1350AL | 5000008898, 5000610398 |
| Petrol Floor Saw BFS 1350L | BFS 1350L | 5000008936 |
| Vibratory Rammer, 280mm/11in S hoe | BS500-4 | 5000009329 |
| Vibratory Rammer, 280mm/11in S hoe | BS600-4 | 5000009331 |
| Floor Saw | BFSX 130RM | 5000009523 |
| Floor Saw | BFSX 130R | 5000009524 |
| vibration plate DPU 4045Y | DPU 4045Y | 5000610027 |
| Floor Saw | BFSX1214 | 5000630101 |
| Floor Saw | MFS14 | 5000630186, 5000630221 |
| Floor Saw | MFSX14 | 5000630246 |
| BH 55, 27x80 | BH 55 27x80 | 5100004026 |
| BH 55, hex 25x108 | BH 55 25x108 | 5100004027 |
| BH 55, hex 28x152 | BH 55 28x152 | 5100004028 |
| BH55 28x160 | BH 55 28x160 | 5100004029 |
| Petrol Breaker | BH 55 27x80 CN | 5100004030 |
| BH 65, 27x80 | BH 65 27x80 | 5100004032 |
| BH 65, hex 25x108 | BH 65 25x108 | 5100004033 |
| BH 65, hex 28x152 | BH 65 28x152 | 5100004034 |
| BH65 28x160 | BH 65 28x160 | 5100004035 |
| BH65 32x160 | BH 65 32x160 | 5100004036 |
| BH55rw 27x80 | BH 55rw 27x80 | 5100004038 |
| BH55rw 25x108 | BH 55rw 25x108 | 5100004039 |
| BH 55rw 28x152 | BH 55rw 28x152 | 5100004040 |
| BH55rw 28x160 | BH 55rw 28x160 | 5100004041 |
| BH55rw 32x160 | BH 55rw 32x160 | 5100004042 |
| BH55RW RS 27x80 | BH 55rw rs 27x80 | 5100004043 |
| BS50-4AS 11IN US | BS50-4As 11in US | 5100030598 |
| BS50-4As 11in | BS50-4As 11in | 5100030599 |
| BS60-4AS 11IN US | BS60-4As 11in US | 5100030605, 5100054151 |
| BS60-4As 11in | BS60-4As 11in | 5100030606, 5100037562, 5100051581 |
| BS70-4As 11in US | BS70-4As 11in US | 5100030610 |
| BS70-4As 11IN | BS70-4As 11in | 5100030611 |
| Floor Saws | BFS 614B | 5000009526 |
| Floor Saws | BFS 614AB | 5000009527 |
| V.Plate DPU 4045Ye | DPU 4045YE | 5000610181 |
| BFS 1345 SAW,ABZ | BFS 1345ABZ | 5000610242 |
| BFS 1345 SAW,BZ | BFS 1345BZ | 5000610243 |
| Petrol Floor Saw BFS 940A | BFS 940A | 5000610327, 5100004004 |
| Petrol Floor Saw BFS 940W | BFS 940W | 5000610328, 5100004005 |
| BH65 Gasoline Breaker | BH 65 | 5000610387 |
| Petrol Breaker BH 23 SJT | BH 23 SJT | 5000610410 |
| Floor Saws | BFS 130(RAW) | 5000630042 |
| Floor Saw | MFS12 | 5000630187, 5000630220 |
| Floor Saw | MFSX14(RAW) | 5000630247 |
| Petrol Breaker | BH 55 27x80 JP | 5100004031 |
| BH65 Gasoline Breaker | BH 65 28x152 US | 5100004037 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2PLUS 11IN HA US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2PLUS 11IN HA US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BH65 28x160 | BH65 28x160 | 5100047068, 5100051587 |
| BH65 32x160 | BH65 32x160 | 5100047069 |
| BH55rw 27x80 | BH55rw 27x80 | 5100047100 |
| BH55rw 28x160 | BH55rw 28x160 | 5100047101 |
| BH55rw 32x160 | BH55rw 32x160 | 5100047102 |
| BH55rw rs 27x80 | BH55rw rs 27x80 | 5100047103 |
| BH65 27X80 | BH65 27x80 | 5100047106 |
| BH65 25x108 | BH65 25x108 | 5100047107 |
| ND-40-I(BH23) | ND-40-I(BH23) | 5100060159 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345A | 5000008697, 5100004007 |
| Gasoline Floor Saw, 450 cutmat ic | BFS 1345AL | 5000008698 |
| Gasoline Floor Saw, Ø 500 cutm atic | BFS 1350A | 5000008751, 5100004011 |
| DPU 5045He-VIBROPLATE | DPU 5045He US | 5000610367 |
| DPU5545He-VIBROPLATE | DPU 5545He US | 5000610402 |
| Vibratory Plate DPU 4545He US | DPU 4545He US | 5100000679 |
| BH 23 27x80 CN | BH 23 27x80 CN | 5100010066 |
| AS50e | AS50e | 5100026850, 5100053792 |
| BS50-2 11IN US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS60-2 11IN | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
| BH55 27x80 | BH55 27x80 | 5100047063 |
| BH55 25x108 | BH55 25x108 | 5100047104 |
| BH55 28x160 | BH55 28x160 | 5100047105 |
| BH40 | BH40 27x80 | 5100047309 |
| BH40rs | BH40rs 27x80 o. bsz | 5100048665 |
| DS70 | DS70Y 13in | 5100060830, 5100030612 |
| AS62e/25 | AS62e/25 | 5100061968 |
| AS68e/25 | AS68e/25 | 5100061972 |
| Powered Floor Saw DFS 90 | DFS 90 | 5000006653 |
| External Vib. AR 52/9/042SP | AR 52/9/042 SP | 5000006940 |
| Vibratory Rammer with 250mm/10 in Shoe | BS45Y | 5000007137 |
| Ext. Vib. AR 52/10,8/046 SP | AR 52/10,8/046 SP | 5000007310 |
| Vibratory Rammer with 152mm/6i n Shoe | BS45YA | 5000007558 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935A | 5000008694 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 935AL | 5000008695 |
| Gasoline Floor Saw, 350 cutmat ic | BFS 1335A | 5000008696 |
| Gasoline Floor Saw, Ø 450 cutm atic | BFS 1345K | 5000008711 |
| DPU4545He-VIBROPLATE | DPU 4545He | 5000610347 |
| Vibratory Plate DPU 4545Hap | DPU 4545Hap | 5000610349 |
| Vibratory Plate DPU 5545He | DPU 5545He | 5000610351 |
| Vibratory Plate DPU 5545Heap | DPU 5545Heap | 5000610353 |
| Petrol Floor Saw BFS 1350AB | BFS 1350AB | 5100000089 |
| Petrol Floor Saw BFS 1350B | BFS 1350W | 5100000090, 5100004013 |
| Petrol Floor Saw BFS 1350ABZ | BFS 1350ABZ | 5100000091 |
| Petrol Floor Saw BFS 1350BZ | BFS 1350Wz | 5100000092, 5100004014 |
| Petrol Floor Saw BFS 1345B | BFS 1345W | 5100001158, 5100004009 |
| Petrol Floor Saw BFS 1345BZ | BFS 1345Wz | 5100001159, 5100004010 |
| Gasoline Powered Floor Saw | BFS 735A | 5100001816 |
| Battery rammer AS50e | AS50 | 5100003033 |
| Floor Saw | BFS 914A | 5100004002 |
| Floor Saw | BFS 914W | 5100004003 |
| Floor Saw | BFS 1318A | 5100004006 |
| BFS1345Az Floor Saw | BFS 1345Az | 5100004008 |
| Gasoline Powered Floor Saw | BFS 1350Az | 5100004012 |
| Vibratory Plate | DPU 5545Hec | 5100005859 |
| Floor saw BFS735 | BFS 735 | 5100009932 |
| BFS1350 | BFS 1350 | 5100009933 |
| Floor saw BFS940 | BFS 940 | 5100009934 |
| BFS1345 Floor Saw | BFS 1345 | 5100009944 |
| Petrol Breaker | BH55 27x80 SEA | 5100026903 |
| Petrol Breaker | BH55rw 27x80 SEA | 5100026904 |
| Petrol Breaker | ND-40-II(BH19) | 5100048663 |
| AS60e | AS60e | 5100049787, 5100052267 |
| BS50-2 10IN | BS50-2 10in | 5100058346 |
| Rammer BS60-4As 11in CN | BS60-4As 11in CN | 5100058869 |
| BS65-4As 11in | BS65-4As 11in | 5100061307 |
| BS72-4As 11in | BS72-4As 11in | 5100061309 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| BS62-4Ab/28 | BS62-4Ab/28 | 5100061966, 5100070526 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS68-4Ab/28 | BS68-4Ab/28 | 5100061970, 5100070525, 5100070527 |
| DS70 | DS70Y 13in LRC | 5100065736 |
| BS50-2 11'' | BS50-2 11in o. bsz | 5100068309 |
| 4 stroke rammer BS50-4As, 280 mm adapter | BS50-4As 11in o. bsz | 5100068310 |
| BS62-4A/28 | BS62-4A/28 | 5100068373 |
| BS68-4A/28 | BS68-4A/28 | 5100068375 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS68-4A/28 CN | BS68-4A/28 CN | 5100070152 |
| Rammer BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
| Rammer BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| AS62e/25 Sunbelt | AS62ve/25 Sunbelt | 5100075650 |
| AS62e/25 Sunbelt | AS68ve/25 Sunbelt | 5100075651 |
| AS62ve/25 | AS62ve/25 | 5100081385 |
| AS68ve/25 | AS68ve/25 | 5100081386 |
| Rammer | BS70-4Rc LA | 5100082769 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
