The Wacker Neuson O-Ring is a genuine OEM sealing component designed for the DPU 130Le reversible vibratory plate compactor and a wide range of EH-series electric demolition breakers, including the EH 23, EH 24, EH 25, EH 27, EH 50, EH 65, EH 70, and EH 75 models. Sourced directly from Wacker Neuson, this O-Ring matches the original part in material composition and dimensional tolerance, ensuring a proper seal within the assembly it serves. Its cross-platform fitment spans both compaction and demolition equipment lines, making a versatile service part to keep on the shelf. Confirm your model number against the fitment list before ordering to ensure compatibility.
Key Features
- Genuine OEM Sealing Material — Manufactured to Wacker Neuson's original elastomer specification, delivering the correct compression set and chemical resistance for this application.
- Drop-In Dimensional Match — Sized to seat precisely in the original groove geometry, eliminating the need for trimming or adjustment during installation.
- Broad Cross-Platform Fitment — Covers the DPU 130Le reversible plate compactor and multiple EH-series electric breaker variants, including EH 23, EH 25, EH 27, EH 50, EH 65, EH 70, and EH 75 models across various voltage configurations.
- Leak Prevention Where It Counts — A correctly seated O-Ring maintains internal pressure integrity and keeps contaminants out; a worn or flattened O-Ring can lead to fluid or air ingress that accelerates internal wear.
- Fluid and Contamination Containment — Critical in both compaction and demolition equipment, where vibration and operating loads place continuous stress on sealing surfaces throughout each work cycle.
An O-Ring is a circular elastomeric seal fitted into a machined groove between two mating surfaces or around a shaft or port. Its job is to block the passage of fluids, lubricants, or air by compressing against the groove walls when the assembly is torqued together. In equipment like the DPU 130Le and the EH-series electric breakers, O-Rings are subjected to constant vibration and pressure cycles that gradually cause the rubber to harden, flatten, or crack. When an O-Ring fails, sealing integrity is lost, which can allow lubricant to escape or contaminants to enter — either condition can accelerate wear on surrounding components and lead to more extensive repairs if left unaddressed.
Part Details
| Part Number | 5002004297 |
|---|---|
| Old Part Number | 2004297 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | O-Ring |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU 130Le | DPU 130Le | 5000610143 |
| DPU130Le | DPU130Le CH/US | 5000610424 |
| Electric Breaker w/28x152 shan k, 110V | EH 27/115 | 5000008396 |
| E.Breaker EH 23/230 Low Vib | EH 23/230 Low Vib | 5000008914, 5000008941, 5000008942, 5000008943, 5000008944, 5000610297 |
| E.Breaker EH 23/115 Low Vib | EH 23/115 Low Vib | 5000008916 |
| Breaker | EH 27/120 Low Vib | 5000610195 |
| Breaker | EH 27/127 Low Vib | 5000610196 |
| Electric Breaker | EH 23/100 Low Vib | 5000610238 |
| EH75/240V Electric Breaker | EH 75/240V | 5000610294 |
| EH25/240 BREAKER | EH 25/230V | 5000610330, 5000610395, 5000610396, 5000610397, 5000610404 |
| EH65 BREAKER | EH 65/120V | 5000610421 |
| Electric Breaker EH 25/115V | EH 25/115V | 5100001903 |
| Electric Breaker w/28x152 shan k, 115V | EH 23/110/15 | 5000007767 |
| Electric Breaker w/Ø27x80 shan k, 230V | EH 23/230 | 5000007770, 5000007771, 5000007776 |
| Electric Breaker w/25x108 shan k, 230V | EH 23/230 EE25x108 | 5000007772 |
| El. Hammer EH 23/110/22 | EH 23/110/22 | 5000007774, 5000007815 |
| Electric Breaker w/27x80 shank , 42V | EH 24/042/200 | 5000007790, 5000610244 |
| E.Breaker EH 24/115/200 | EH 24/115/200 | 5000007791 |
| El. Hammer EH 24/250/200 | EH 24/250/200 | 5000007792 |
| Breaker EH 27/127 | EH 27/127 | 5000008957 |
| High Frequency Demolitionset | TEH 1 | 5000610241 |
| EH 50, hex 25x108 | EH 50/230 25x108 | 5100001908 |
| EH 50, 27x80 | EH 50/230 27x80 | 5100001909 |
| EH 75, 27x80 | EH 75/230 27x80 | 5100004152 |
| EH 75, hex 25x108 | EH 75/230 25x108 | 5100004153 |
| EH 75, hex 28x160 | EH 75/230 28x160 | 5100004154 |
| EH 75, hex 28x152 | EH 75/230 28x152 | 5100004155 |
| EH 75, hex 32x160 | EH 75/230 32x160 | 5100004156 |
| EH75/240 Electric Breaker | EH 75/240 28x152 US | 5100004157 |
| EH70 32x160 | EH 70/115 32x160 UK | 5100004158 |
| EH70/120 Electric Breaker | EH 70/120 28x152 US | 5100004159 |
| EH 50, hex 28x152 | EH 50/230 28x152 | 5100004472 |
| EH 50, hex 28x160 | EH 50/230 28x160 | 5100004473 |
| Electric Hammer | EH 50/230 28x160 BR | 5100009761 |
| Electric Hammer | EH 75/230 28x160 BR | 5100009762 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
