The Wacker Neuson 5002005666 is a genuine OEM Gasket designed for the BS-series vibratory rammer lineup, covering a broad range of models including the BS500, BS600, BS700, BS50-2, BS60-2, BS70-2, BS52Y, BS60Y, BS65-V, and their oil-injected and variable-speed variants. As a genuine Wacker Neuson part, the 5002005666 is manufactured to the same specification as the original component installed at the factory, ensuring a consistent, leak-free seal wherever it is applied. This Gasket is a direct-fit replacement across an extensive range of BS rammer configurations, including EU-spec, high-altitude, and oil-injected models. If you are servicing or rebuilding any of the covered BS rammer models, verifying your machine number against the fitment list confirms this is the correct part before you order.
Key Features
- Genuine OEM Sealing Integrity — Manufactured to the exact material grade and compression specification of the original, ensuring a proper seal that prevents fluid or air leaks in the rammer's engine or internal assemblies.
- Drop-In Replacement — Matches the original mounting profile and thickness, so it seats correctly without trimming or shimming during reassembly.
- Broad BS-Series Coverage — Fits BS500, BS600, BS700, BS50-2, BS60-2, BS70-2, BS52Y, BS60Y, BS65-V, and related oil-injected and high-altitude variants across a wide production date range.
- Protects Engine Performance — A failed or compressed gasket allows combustion gases or fluids to escape the sealed joint, causing power loss, overheating, or contamination. A fresh OEM gasket restores proper compression and sealing.
- Fuel and Engine System Safety — Where this gasket seals fuel or combustion pathways, using the correct OEM-spec material prevents leaks that could create fire hazards or cause the rammer to run lean and sustain internal damage.
A gasket creates a compression-tight seal between two mating surfaces — such as an engine cover, cylinder head, or carburetor — preventing gases, oil, or fuel from escaping the joint during operation. In a vibratory rammer like the BS-series, the engine operates under continuous high-cycle vibration, which accelerates wear on sealing surfaces and can cause an aging gasket to crack, compress unevenly, or blow out entirely. When a gasket fails, the machine may lose compression, develop fuel or oil leaks, run erratically, or overheat — all of which require immediate attention to avoid further internal damage.
Part Details
| Part Number | 5002005666 |
|---|---|
| Old Part Number | 2005666 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Rammer with 280mm/11 in Shoe | BS600 | 5000007551, 5000008207, 5000009077, 5000008205, 5000009307 |
| Vibratory Rammer with 280mm/11 in Shoe | BS500 | 5000007550, 5000008049, 5000008048, 5000009075, 5000009074, 5000008204 |
| Vibratory Rammer, 280mm/11in S hoe | BS700 | 5000008051, 5000008052, 5000007552, 5000009079, 5000008206, 5000009308 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009419, 5000009420 |
| Oil-injected Rammer with 280mm /11in | BS70-2i EU | 5000009428, 5000009426 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009417, 5000009421, 5000009418 |
| Oil-injected Rammer with 280mm /11in Shoe | BS50-2i EU | 5000009414, 5000009412, 5000009416 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009427, 5000009425 |
| BS60-2i | BS60-2i | 5000009339, 5000009393 |
| Oil-injected Rammer with 250mm /10in Shoe | BS50-2i | 5000009473, 5000009338, 5000009383, 5000620026, 5000009332 |
| 330mm/13in Shoe, Oil-injected Rammer | BS70-2i | 5000009341, 5000009401 |
| Variable Speed Rammer with 280 mm/11in Shoe | BS65-V EU | 5000009423 |
| Vibratory Rammer with 280mm/11 in Shoe | BS50-2 EU | 5000009410, 5000009413, 5000009411 |
| 250mm/10in Shoe, Vibratory Ram mer | BS50-2 | 5000009384, 5000620048, 5000620025, 5000009382, 5000009380 |
| Vibratory Rammer with 254mm/10 in Shoe | BS52Y | 5000007508, 5000008053, 5000008054, 5000009409, 5000007148 |
| Variable Speed Vibratory Ramme r, 280mm/11in Shoe | BS650 | 5000008209 |
| Vibratory Rammer, 280mm/11in S hoe | BS600S | 5000009212 |
| Vibratory Rammer, 254mm/10in S hoe | BS500S | 5000009211 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS600-oi | 5000009166, 5000009262 |
| Oil-injected Rammer, 280mm/11i n Shoe | BS500-oi | 5000009165, 5000009343 |
| Oil-injected Rammer, 330mm/13i n Shoe | BS700-oi | 5000009167, 5000009328 |
| 280mm/11in Shoe, Vibratory Ram mer | BS60-2 | 5000009388, 5000009391 |
| 330mm/13in Shoe, Vibratory Ram mer | BS70-2 | 5000009399, 5000009397 |
| 280mm/11in Shoe, Variable Spee d Rammer | BS65-V | 5000009396 |
| Vibratory Rammer | BS60Y | 5000007509, 5000006779 |
| Vibratory Rammer with 250mm/10 in Shoe | BS45Y | 5000007137 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
