Wacker Neuson 5002005687 Valve Throttle Shutter
Wacker Neuson

Wacker Neuson 5002005687 Valve Throttle Shutter

$1.25
(No reviews yet) Write a Review
SKU:
5002005687-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Valve Throttle Shutter is a genuine OEM component designed for the BS50, BS60, BS70, BS500, BS600, BS700, BS52Y, BS60Y, BS65-V, and BS600-oi rammer series, covering an extensive range of vibratory and oil-injected rammer configurations. As a factory-original part, the is manufactured to the same specifications as the component that came in your machine, ensuring a direct, dependable fit without guesswork. This Throttle Shutter Valve is a critical fuel system component — replacing a worn or damaged unit restores proper throttle response and engine control to your rammer.

Key Features

  • Genuine OEM Fuel System Accuracy — Factory-original construction ensures the shutter seals and pivots to the correct tolerances, maintaining consistent fuel-air metering that an out-of-spec valve cannot deliver.
  • Direct-Fit Replacement — Engineered to seat and connect exactly as the original, dropping straight into the carburetor assembly without rework or adaptation.
  • Broad Rammer Compatibility — Fits a wide range of Wacker Neuson vibratory and oil-injected rammers across the BS50, BS60, BS70, BS500, BS600, BS700, BS52Y, and BS65-V series, including standard, high-altitude, and variable-speed variants.
  • Restored Throttle Response — A correctly functioning Throttle Shutter Valve gives the operator precise engine speed control; a worn or sticking valve causes erratic RPM, poor compaction output, and hard starting.
  • Fuel System Integrity — Because the throttle shutter directly governs fuel-air mixture entering the engine, using a genuine OEM valve helps prevent over-fueling, rough running, and excessive emissions — keeping the machine operating within its designed parameters.

The Valve Throttle Shutter is a precision plate mounted inside the carburetor that rotates to regulate the volume of the air-fuel mixture delivered to the engine. When you move the throttle control on a rammer, this valve opens or closes in direct response, allowing the engine to speed up for active compaction or return to idle between passes. A throttle shutter that is cracked, warped, or seized will cause the engine to run unevenly, refuse to hold a set speed, or become difficult to start — all of which directly compromise compaction efficiency and operator control. Replacing it promptly with part number 5002005687 restores precise throttle control and protects the engine from the wear associated with an improperly metered fuel charge.

Part Details

Part Number5002005687
Old Part Number2005687
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionValve Throttle Shutter

Compatibility & Fitment

Name Model Machine Number
Vibratory Rammer with 280mm/11 in Shoe BS500 5000007550, 5000008049, 5000008048, 5000009075, 5000009074, 5000008204
Vibratory Rammer with 280mm/11 in Shoe BS600 5000007551, 5000008207, 5000009077, 5000008205, 5000009307
Vibratory Rammer, 280mm/11in S hoe BS700 5000008051, 5000007552, 5000008052, 5000009079, 5000008206, 5000009308
Oil-injected Rammer with 280mm /11in Shoe BS60-2i EU 5000009419, 5000009420
Oil-injected Rammer with 280mm /11in BS70-2i EU 5000009428, 5000009426
Vibratory Rammer with 280mm/11 in Shoe BS70-2 EU 5000009424, 5000009427, 5000009425
BS60-2i BS60-2i 5000009339, 5000009393
Oil-injected Rammer with 280mm /11in Shoe BS50-2i EU 5000009414, 5000009412, 5000009416
Vibratory Rammer with 280mm/11 in Shoe BS60-2 EU 5000009417, 5000009418, 5000009421
Variable Speed Rammer with 280 mm/11in Shoe BS65-V EU 5000009423
Vibratory Rammer with 254mm/10 in Shoe BS52Y 5000007508, 5000008053, 5000008054, 5000009409
BS50-2i BS50-2i 5000009338, 5000009473, 5000009383, 5000009332, 5000620026
330mm/13in Shoe, Oil-injected Rammer BS70-2i 5000009341, 5000009401
250mm/10in Shoe, Vibratory Ram mer BS50-2 5000009384, 5000620025, 5000620048, 5000009380, 5000009382
Vibratory Rammer with 280mm/11 in Shoe BS50-2 EU 5000009410, 5000009411, 5000009413
Variable Speed Vibratory Ramme r, 280mm/11in Shoe BS650 5000008209
Vibratory Rammer, 254mm/10in S hoe BS500S 5000009211
Vibratory Rammer, 280mm/11in S hoe BS600S 5000009212
Oil-injected Rammer, 280mm/11i n Shoe BS600-oi 5000009166, 5000009262
Oil-injected Rammer, 280mm/11i n Shoe BS500-oi 5000009165, 5000009343
Oil-injected Rammer, 330mm/13i n Shoe BS700-oi 5000009167, 5000009328
280mm/11in Shoe, Vibratory Ram mer BS60-2 5000009388, 5000009391
280mm/11in Shoe, Vibratory Ram mer BS70-2 5000009397, 5000009399
280mm/11in Shoe, Variable Spee d Rammer BS65-V 5000009396
Vibratory Rammer BS60Y 5000007509

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.