The Wacker Neuson 5003007042 is a genuine OEM Nylon Bushing designed for the WP1550 series single-direction vibratory plates, VPG165 and VPG170 series vibratory plates, RT560 and RT820 series vibratory trench rollers, and the DPS 1850H asphalt vibratory plate. Sourced directly from Wacker Neuson, this bushing meets the original equipment specifications for correct fit and function across all listed models. Whether you are servicing a WP1550A, WP1550W, RT820HT, or any compatible variant in the series, part number 5003007042 is the correct factory replacement. Keep a spare on hand for planned maintenance — bushing wear is a common cause of looseness and accelerated component damage in vibratory compaction equipment.
Key Features
- Genuine OEM Material Grade — Manufactured from nylon formulated to withstand the continuous vibration loads and impact cycles inherent in vibratory plate and trench roller operation, maintaining correct clearance over time.
- Drop-In Replacement — Matches original bore dimensions and seat geometry so it installs directly into the existing housing without modification to surrounding components.
- Broad Fitment Coverage — Confirmed for WP1550 series vibratory plates, VPG165 and VPG170 series vibratory plates, RT560 and RT820 vibratory trench rollers, and the DPS 1850H asphalt plate — covering a wide range of Wacker Neuson compaction equipment.
- Protects Mating Components — A correctly seated bushing cushions metal-to-metal contact between moving parts; a worn or missing bushing accelerates wear on shafts, housings, and surrounding hardware, leading to costlier repairs.
- Genuine Wacker Neuson Part — Supplied as original equipment, ensuring the correct nylon grade, wall thickness, and dimensional tolerances specified for 5003007042 are met exactly.
A nylon bushing acts as a wear-absorbing interface between two mating components — typically a shaft or pin and its surrounding housing. In vibratory compaction equipment, the bushing isolates and dampens the transfer of vibration-induced forces at that joint, allowing smooth articulation or rotation while protecting harder metal surfaces from direct contact. When a nylon bushing wears down or breaks, the resulting metal-to-metal contact causes rapid wear, increased noise, and eventual failure of the shaft or housing it was protecting — making timely replacement critical to keeping the machine running within its design parameters.
Part Details
| Part Number | 5003007042 |
|---|---|
| Old Part Number | 3007042 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Nylon Bushing |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043, 5000009486 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630044 |
| Vibratory Trench Roller | RT560 | 5000009001, 5000009000, 5000007643, 5000007642 |
| Vibratory Trench Roller | RT820 | 5000009003, 5000009002, 5000007644, 5000007652 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550VW | 5000007577 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550V | 5000007580 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550RW | 5000007578 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550R | 5000007581 |
| WP1550W VIBROPLATE | WP1550W | 5000009324, 5000009548, 5000630064 |
| WP1550 VIBROPLATE | WP1550 | 5000009325, 5000630065 |
| Vibratory Plate 587mm/18in | VPG165V | 5000007554 |
| Vibratory Trench Roller | RT820HT | 5000007645, 5000008047 |
| Vibratory Plate 587mm/18in | VPG165A | 5000008038 |
| Vibratory Plate 587mm/18in | VPG170A | 5000008039 |
| Vibration plate DPS 1850H Asphalt | DPS 1850H | 5000008750 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
