The Wacker Neuson is a genuine OEM Screw 5/16-18X5/8 Hexserrated Flange Zinc Plated designed for the LTW and LTN series light towers, including the LTW6K-V, LTW8K-V, LTW20Z1-V, LTW20Z3-V, LTN6K-V, LTN6L-V, and LTN8K-V families. Sourced directly from Wacker Neuson, this fastener matches the original specification for thread size, head style, and corrosion-resistant zinc plating. Whether you are restoring a cold-weather tower, a Tier 4i unit, or a 50 Hz CE-configured machine, part number ensures a correct, like-for-like replacement. Keeping the right hardware in place helps maintain structural integrity across the light tower's panels, mast, and mounting points.
Key Features
- Correct Thread Engagement: — 5/16-18 UNC thread form matches the original tapped holes in LTW and LTN series light tower assemblies, ensuring full thread engagement without cross-threading risk.
- Hexserrated Flange Head Design: — The serrated flange distributes clamping load evenly and bites into mating surfaces to resist loosening under vibration — critical on mobile light tower equipment operating on uneven terrain.
- Zinc Plated Corrosion Protection: — The ZP (zinc plated) finish guards against surface rust in outdoor and all-weather jobsite environments, helping the fastener maintain holding strength over repeated service cycles.
- Genuine OEM Part: — Manufactured to Wacker Neuson's original hardware specification; direct replacement for the factory-installed screw with no guesswork on sizing or coating grade.
- Broad LTW / LTN Series Coverage: — Fits a wide range of Wacker Neuson light towers across the LTW6K-V, LTW8K-V, LTW20Z1-V, LTW20Z3-V, LTN6K-V, LTN6L-V, LTN6LE-V, and LTN8K-V families, including Tier 4, Tier 4i, Tier 4F, cold-weather, and 50 Hz CE variants.
A hexserrated flange screw combines a hex-drive bolt head with an integrated serrated washer flange in a single fastener. The serrations dig into the clamping surface as the fastener is tightened, creating mechanical resistance to rotational loosening — a property that makes this style of screw well suited to equipment that experiences vibration during transport and operation. On light towers like the LTW and LTN series, this type of fastener is commonly used at panel joints, mast components, and bracket attachment points where maintaining a secure, rattle-free connection is essential. A missing, stripped, or corroded screw in these locations can allow panels to shift or components to work loose, compromising both the structural integrity of the tower and safe operation on site.
Part Details
| Part Number | 5200002038 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Screw 5/16-18X5/8 Hexserrated Flange Zinc Plated |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| LTW20Z3-V S LIGHT TOWER, COLD WEATHER, T4i | LTW20Z3-V S | 5200018566, 5200018562, 5100015094 |
| LTW20Z1-V S LIGHT TOWER, COLD WEATHER, T4i | LTW20Z1-V S | 5200018565, 5200018561, 5100015093, 5100022125 |
| LTN6L-V LIGHT TOWER,50HZ CUSTOM | LTN6L-V | 5200002721, 5200002717, 5200002718, 5200002719, 5200017102, 5200019283 |
| LTW6K-V S Light Tower, Cold Weather T4 | LTW6K-V S | 5200018563, 5200018559 |
| LTW8K-V S Light Tower, Cold Weather T4 | LTW8K-V S | 5200018564, 5200018560, 5100022084 |
| LTN6K-V LIGHT TOWER,60HZ CUSTOM | LTN6K-V | 5200002726 |
| LTN8K-V LIGHT TOWER,60HZ CUSTOM | LTN8K-V | 5200002728 |
| Light Tower | LTW20Z3-V | 5200012885 |
| LTW6K-V Light Tower, Cold Weather T4 | LTW6K-V | 5200012882 |
| LTW8K-V Light Tower, Cold Weather T4 | LTW8K-V | 5200012883 |
| Light Tower | LTW20Z1-V | 5200012884 |
| LTN6L-V S LIGHT TOWER, CUSTOM, Tier 4F | LTN6L-V S | 5200018539, 5200018576 |
| LTN6K-V S LIGHT TOWER, CUSTOM, Tier 4F | LTN6K-V S | 5200018550 |
| LTN8K-V S LIGHT TOWER, CUSTOM, Tier 4F | LTN8K-V S | 5200018551 |
| LTN6LE-V 50 Hz CE 230 V LED | LTN6LE-V | 5200019285, 5200019140 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
Wacker Neuson