Wacker Neuson 5200009582 Tank Mounting Plate
Wacker Neuson

Wacker Neuson 5200009582 Tank Mounting Plate

$8.98
(No reviews yet) Write a Review
SKU:
5200009582-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Tank Mounting Plate is a genuine OEM component designed for the BS50, BS60, and BS70 series vibratory rammers. As a direct OEM replacement, part is manufactured to the same specifications as the original, ensuring correct fitment across a wide range of two-cycle, four-cycle, and oil-injected rammer configurations. Compatibility extends to BS50-2, BS50-2i, BS50-4s, BS60-2, BS60-2i, BS60-4s, BS65-V, BS70-2, BS70-2i, DS70, MS52, MS54, MS62, and MS64A models. This is the correct part number to specify when servicing or restoring the fuel tank mounting on any of these machines.

Key Features

  • Genuine OEM Construction — Produced by Wacker Neuson to original material and dimensional tolerances, so the plate seats flush and holds the tank securely under continuous vibration loads.
  • Direct-Bolt Replacement — Matches the original mounting hole pattern and hardware interface, allowing installation without any modification to the rammer frame or tank assembly.
  • Broad Rammer Family Coverage — Fits BS50, BS60, BS70, DS70, and MS-series vibratory rammers across two-cycle, four-cycle, oil-injected, and variable-speed variants in both standard and EU configurations.
  • Structural Integrity Under Vibration — A correctly fitted tank mounting plate keeps the fuel tank rigidly positioned during operation; a cracked or loose plate can allow tank movement that stresses fuel lines and connections.
  • Fuel System Safety — Secure tank mounting is a prerequisite for fuel line integrity; replacing a damaged mounting plate eliminates a potential source of fuel leaks on a machine operating near compacted-fill worksites.

The tank mounting plate is the structural interface between the fuel tank and the rammer frame, holding the tank in a fixed position throughout the high-frequency impact cycles that define rammer operation. Because vibratory rammers generate sustained percussive forces, this plate must resist constant flexing without cracking or loosening. When the plate is damaged or missing, the fuel tank can shift, placing stress on the fuel lines and carburetor connections and increasing the risk of fuel leaks or interrupted fuel delivery. Replacing a worn or broken mounting plate restores the rigid support the tank needs for consistent, safe machine operation.

Part Details

Part Number5200009582
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionTank Mounting Plate

Compatibility & Fitment

Name Model Machine Number
BS50-2i BS50-2i 5000009338, 5000009383, 5000620955, 5000009473, 5000620026, 5000620611, 5200003696
250mm/10in Shoe, Vibratory Ram mer BS50-2 5000009384, 5000620733, 5000620025, 5000620048, 5000620609, 5000620610
BS60-2i BS60-2i 5000009339, 5000009393, 5000620906, 5000620613, 5000620614
Oil-injected Rammer with 250mm /10in Shoe BS50-2i EU 5000009412, 5000009414, 5000009416
330mm/13in Shoe, Oil-injected Rammer BS70-2i 5000009341, 5000009401
Vibratory Rammer with 280mm/11 in Shoe BS50-2 EU 5000009410, 5000009411, 5000009413
Oil-injected Rammer with 280mm /11in Shoe BS60-2i EU 5000009419, 5000009420
Vibratory Rammer with 280mm/11 in Shoe BS60-2 5000620905, 5000620612
Vibratory Rammer with 280mm/11 in Shoe BS60-2 EU 5000009417, 5000009421
Oil-injected Rammer with 330mm /13in Shoe BS70-2i EU 5000009426, 5000009428
Vibratory Rammer with 280mm/11 in Shoe BS70-2 5000620907
Variable Speed Rammer with 280 mm/11in Shoe BS65-V EU 5000009423
Vibratory Rammer with 330mm/13 in Shoe BS70-2 EU 5000009425, 5000009427
Vibratory Rammer with 280mm/11 in Shoe BS50-4s 5000620908, 5000620322, 5000620078
BS60 -4s RMR,11 PL SHOE,HA 42 BS60-4s 5000620387, 5000620909, 5000620323, 5000620820
Four-cycle Rammer,280mm/11in S hoe BS60-4s EU 5000620388, 5000620819, 5000620816, 5200003883, 5200004239
280/11in Shoe, Vibratory Ramme r MS62 5200004690
280/11in Shoe, Vibratory Ramme r MS52 5200008222
Vibratory Rammer with 280mm/11 in Shoe BS50-4HO EU 5000620818
MS64A Vibratory Rammer, 11" MS64A 5200014899
DS70H Vibratory Rammer, 13" Plastic Shoe EPA DS70 5200010976
280/11in Shoe, Vibratory Ramme r MS54 5200013518

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.