The Wacker Neuson Banjo Fitting With Bolt And Washers, M12 is a genuine OEM component designed for the G70 generator series. This includes the Custom T4i, Standard T4i, Cold Weather T4i, Extended Run T4i, Hertz T4i, and URI HVAC variants of the G70 — covering the full range of T4i configurations offered in this family. As a factory-sourced part, delivers the exact thread spec, sealing surface geometry, and hardware set required for a leak-free fuel or hydraulic line connection. Order with confidence knowing this is the correct assembly for your G70 application.
Key Features
- Complete Hardware Assembly: — Includes the banjo bolt and both copper or sealing washers as a matched set, eliminating the guesswork of sourcing individual components separately.
- M12 Thread Specification: — Sized to the correct M12 thread pitch used on G70 fuel or fluid line connections, ensuring proper torque engagement without risk of cross-threading or over-tightening damage.
- Genuine OEM Sourcing: — Manufactured to Wacker Neuson's original material and dimensional standards, with the correct sealing surface finish to prevent weeping or seepage at the banjo joint under operating pressure and vibration.
- Broad G70 Series Coverage: — Confirmed fitment across Custom T4i, Standard T4i, Cold Weather T4i, Extended Run T4i, Hertz T4i, and URI HVAC G70 generator configurations.
- Leak Prevention: — A failed or damaged banjo fitting can result in fluid loss, contamination risk, and unplanned generator shutdown. Replacing with the correct OEM part restores a fully sealed fluid circuit.
- Fuel System Integrity: — Used in the fuel delivery circuit of a portable generator, a properly torqued and sealed banjo fitting is critical to safe, compliant operation — particularly on T4i emissions-certified equipment.
A banjo fitting is a hollow, bolt-through connector used to join a fluid line — most commonly a fuel feed or return line — to a component such as a fuel filter housing, injection pump, or engine block. The banjo bolt passes through the center of the rounded banjo end, and sealing washers on each side of the joint compress to form a leak-tight seal when torqued correctly. Over time, the soft sealing washers can deform, crack, or lose their ability to seal, and the bolt itself can suffer thread wear or corrosion — both leading to fuel weeps that compromise safe operation. Replacing the complete assembly with a matched OEM set, such as Wacker Neuson part 5200012469, ensures the correct crush characteristics and thread engagement are restored to specification.
Part Details
| Part Number | 5200012469 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Banjo Fitting With Bolt And Washers, M12 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| G70 Generator, Custom T4i | G70 | 5200003975, 5200003973, 5200003974, 5200004151, 5200008719, 5100025262 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
