The Wacker Neuson Fuse is a genuine OEM Fuse designed for the E2200, E3000, E3000 ES, E5000, and CH5000 series hydronic surface heaters and ground heaters. As a direct OEM replacement sourced from Wacker Neuson, part meets the exact electrical specifications required by these heater systems. This fuse fits an extensive range of E-series configurations, including lift bail, generator-equipped, and TC variants across the E2200, E3000, and E5000 families. Keeping the correct replacement fuse on hand means your heater is back in service fast when an electrical fault occurs.
Key Features
- Correct Amperage and Interrupt Rating — Genuine OEM specification ensures this fuse carries the precise electrical rating required to protect the heater's control circuit without nuisance blowing or under-protection.
- Direct Plug-In Replacement — Installs into the existing fuse holder without modification, maintaining the integrity of the original electrical circuit.
- Broad E-Series Fitment — Compatible across E2200, E3000, E3000 ES, E5000, and CH5000 ground heater and hydronic surface heater configurations, including generator-equipped and lift bail variants.
- Protects Critical Heater Electronics — A functioning fuse shields the control board, pump motor, and burner components from current overloads; a blown or incorrect fuse can leave a full heater system inoperable on a cold-weather pour.
- Electrical Safety Compliance — Using the OEM-specified fuse ensures the circuit protection is rated correctly for the system voltage and load, an important safeguard in portable heating equipment operating in demanding site conditions.
- Genuine Wacker Neuson OEM Part — Supplied as original equipment, part number 5000166710 is backed by Wacker Neuson's parts program for quality assurance.
A fuse is the primary overcurrent protection device in the heater's electrical circuit. When current draw exceeds the rated threshold — due to a short circuit, component failure, or voltage spike — the fuse element melts and breaks the circuit before damage can reach the control board, pump, or burner assembly. Without a correctly rated fuse in place, an overcurrent event can cascade into costly component damage or a complete heater shutdown at the worst possible time. Replacing a blown fuse with the correct OEM part restores proper circuit protection and gets the heater running again quickly.
Part Details
| Part Number | 5000166710 |
|---|---|
| Old Part Number | 0166710 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuse |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| E5000 GROUND HEATER, W/GAS BURNER | E5000 | 5000620898, 5000620897, 5000620899 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| Cross Heater with oil burner | CH5000 | 5000620240, 5000620242 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
