The Wacker Neuson 5000126982 is a genuine OEM Countersunk Screw designed for DPU and DPS series reversible vibratory plate compactors. This fastener is sourced directly from Wacker Neuson and serves as an exact fit replacement for a wide range of diesel-powered reversible plates, including the DPU 2550H, DPU 2560H, DPU 3060H, DPU 3070H, DPU 3750Hts, DPS1850H, and DPS2050H series. As a genuine OEM part, the 5000126982 matches the original hardware specification for thread form, head geometry, and material grade — ensuring proper seating and clamping force without the risk of hardware mismatch. Confirm your machine's model number before ordering to ensure compatibility across the full DPU and DPS family.
Key Features
- Correct Head Profile for Flush Mounting — The countersunk head seats fully flush against the mating surface, preventing interference with adjacent components and maintaining structural integrity of the assembly.
- Genuine OEM Material and Thread Specification — Manufactured to Wacker Neuson's original thread pitch and tensile grade, ensuring consistent clamping force and resistance to the vibration loads produced by reversible plate compactors.
- Broad DPU and DPS Series Compatibility — Fits a wide range of reversible vibratory plate compactors including DPU 2440H, DPU 2540H, DPU 2550H, DPU 2560H, DPU 3050H, DPU 3060H, DPU 3070H, DPU 3750Hts, DPU 3760Hts, DPS1850H, and DPS2050H variants.
- Maintains Assembly Integrity Under High-Vibration Conditions — Reversible plate compactors generate constant cyclic vibration forces; using a fastener matched to the original spec helps prevent loosening, stripping, or fatigue failure during operation.
- Direct OEM Sourcing — Supplied as a genuine Wacker Neuson replacement part, so thread form, head dimensions, and finish align with what left the factory — no guesswork on sizing or substitutions.
A countersunk screw is a threaded fastener with a tapered, flat-topped head designed to sit flush or below the surface of the material it fastens. In reversible vibratory plate compactors like the DPU and DPS series, countersunk screws are used where a protruding fastener head would interfere with a mating panel, guard, or housing component. Because these machines operate under continuous vibration during compaction, fasteners in these assemblies are subject to significant cyclic stress — a screw with the wrong thread pitch, head angle, or material grade can work loose or fail prematurely, potentially allowing guarded components to shift or become unsecured. Replacing a worn or damaged screw with the correct OEM part, such as the Wacker Neuson 5000126982, ensures the joint is restored to its original clamping specification.
Part Details
| Part Number | 5000126982 |
|---|---|
| Old Part Number | 0126982 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Countersunk Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| DPU 2550H | DPU 2550H | 5000610036, 5000008756 |
| DPU 2560H | DPU 2560H | 5000610037, 5000008757 |
| DPU2540H | DPU 2540H | 5000610035, 5000008755 |
| DPU 2560H-TS | DPU 2560H-TS | 5000610038, 5000610005 |
| DPU 3070H | DPU 3070H | 5000610041, 5000008908 |
| DPU 3060H | DPU 3060H | 5000610040, 5000008760 |
| DPU 3060H-TS | DPU 3060H-TS | 5000610042, 5000610006 |
| DPU 3050H | DPU 3050H | 5000610039, 5000008759 |
| DPU 3060HE-TS | DPU 3060HE-TS | 5000610302 |
| DPU 3050HE | DPU 3050HE | 5000610298 |
| DPS1850H Asphalt | DPS1850H Asphalt | 5000610033, 5000008925 |
| DPS1850H Vario | DPS1850H Vario | 5000610034, 5000008926 |
| DPS1850H Basic | DPS1850H Basic | 5000610032, 5000008924 |
| DPU 3750Hts | DPU 3750Hts | 5000610321 |
| DPU 3750Hets | DPU 3750Hets | 5000610322 |
| DPU 3760Hts | DPU 3760Hts | 5000610358 |
| DPU 3760Hets | DPU 3760Hets | 5000610359 |
| Reversible Vibratory Plate, 24 kN, 40cm/16in | DPU 2440H | 5000007870 |
| DPS2050H | DPS2050H | 5100061223 |
| DPS2050Hw | DPS2050Hw | 5100061224 |
| Vibration plate DPU 2450H | DPU 2450H | 5000008746 |
| Vibration plate DPS 1850H Asphalt | DPS 1850H | 5000008750, 5000008397 |
| DPU 3050H US | DPU 3050H US | 5100000310 |
| Vibration Plate | DPU 3050Hw US Army | 5100009915 |
| DPS3060Hv | DPS3060Hv | 5100016643 |
| DPU 3750Hts US | DPU 3750Hts US | 5100000311 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
