The Wacker Neuson 5100011653 is a genuine OEM Mounting designed for the RD series tandem rollers and RC series single-drum soil compactors. As a direct OEM replacement sourced from Wacker Neuson, part 5100011653 meets the same specifications as the original component installed at the factory. Fitment spans the full RD18, RD24, RD27, RD28, RD40, and RD45 tandem roller families, as well as RC50 and RC70 soil compactors, covering smooth-drum, padfoot, combination, and DPF-equipped variants across both US and international configurations. When it's time for scheduled maintenance or unplanned repair, this mounting delivers the exact-fit confidence needed to get your machine back in service.
Key Features
- Genuine OEM Construction: Manufactured to Wacker Neuson's original material and dimensional standards — critical for a structural mounting that anchors components under continuous vibration and compaction loads.
- Direct Bolt-On Replacement: Matches the original hole pattern and interface geometry, allowing straightforward installation without rework or shimming on supported models.
- Broad RD and RC Series Coverage: Compatible with RD18, RD24, RD27, RD28, RD40, and RD45 tandem rollers and RC50 and RC70 soil compactors, including smooth-drum, padfoot, DPF, and combination variants.
- Structural Integrity Under Load: A properly functioning mounting keeps attached components securely positioned during operation; a worn or cracked mounting introduces misalignment, accelerated wear on connected parts, and potential structural failure.
- Verified Part Number: Order by Wacker Neuson part number 5100011653 to confirm you are receiving the correct mounting for your specific machine configuration.
A mounting is a structural bracket or support component that secures a system — such as an engine, hydraulic unit, or accessory assembly — to the machine's frame in a fixed, stable position. On tandem rollers and soil compactors that operate under constant vibration, the mounting must resist cyclic stress without cracking, loosening, or allowing movement that could shift the position of the component it supports. When a mounting degrades, attached systems can shift out of alignment, fasteners can work loose, and secondary damage to connected components often follows.
Part Details
| Part Number | 5100011653 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Mounting |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD28-120o DPF | RD28-120o DPF | 5100047394 |
| RD18-80 Tandem Roller | RD18-80 | 5100011382, 5100055774, 5100047360 |
| RD24-100c.3 | RD24-100c.3 | 5100047370 |
| RC70 US | RC70 US | 5100047415 |
| RD40-130o DPF | RD40-130o DPF | 5100055781 |
| RD45-140 O Tandem Roller | RD45-140O US | 5100021806 |
| RD45-140o | RD45-140o | 5100047387 |
| RC70p | RC70p | 5100047411 |
| RD40-130 | RD40-130 | 5100047382, 5100011391 |
| RD24-100 O Tandem Roller | RD24-100O US | 5100021759 |
| RD45-140 DPF | RD45-140 DPF | 5100055778 |
| RD45-140c DPF | RD45-140c DPF | 5100055780 |
| RD40-130 DPF | RD40-130 DPF | 5100055777 |
| RD24-100o | RD24-100o | 5100047378 |
| RD24-100o DPF | RD24-100o DPF | 5100047393 |
| RD27-120 Tandem Roller | RD27-120 | 5100011386 |
| RD24-100c | RD24-100c | 5100047376 |
| RC50p US | RC50p US | 5100047414 |
| RD40-130 Tandem Roller | RD40-130 US | 5100021801 |
| RD45-140c.3 | RD45-140c.3 | 5100047398 |
| RD18-100 | RD18-100 | 5100047361, 5100011383, 5100055775 |
| RD28-120 C Tandem Roller | RD28-120C US | 5100021758 |
| RD27-120 | RD 27-120.3 | 5100032198 |
| RD28-120 O Tandem Roller | RD28-120O US | 5100021800 |
| RD18-100 Tandem Roller | RD18-100 US | 5100027573 |
| RD24-100 Tandem Roller | RD24-100 US | 5100021755 |
| RD45-140 C Tandem Roller | RD45-140C US | 5100021804 |
| RC70vo | RC70vo | 5100047412 |
| RD40-130c DPF | RD40-130c DPF | 5100055779 |
| Vibration Roller | RD18-100 SE | 5100044989 |
| Vibration Roller | RD18-100c 3 | 5100047363 |
| RD27-120o | RD27-120o.3 | 5100047373 |
| RD40-130 O | RD40-130 O | 5100011395 |
| RD18-100c | RD18-100c | 5100055776, 5100047362 |
| RD28-120 DPF | RD28-120 DPF | 5100047390 |
| RD45-140c | RD45-140c | 5100047385 |
| RD24-100 | RD24-100 | 5100047374, 5100011385 |
| RD24-100 C Tandem Roller | RD24-100C US | 5100021757 |
| RC50 | RC50 | 5100047388 |
| RD24-100c DPF | RD24-100c DPF | 5100047391 |
| RD45-140 Tandem Roller | RD45-140 US | 5100021802 |
| RD40-130c | RD40-130c | 5100047384 |
| RD18-80 Tandem Roller | RD18-80 US | 5100027572 |
| RD27-120 C Tandem Roller | RD27-120 C | 5100011388 |
| RC70 | RC70 | 5100047410 |
| RD45-140 Tandem Roller | RD45-140 | 5100011392, 5100047383 |
| RD24-100 DPF | RD24-100 DPF | 5100047380 |
| RD24-100 O Tandem Roller | RD24-100 O | 5100011389 |
| RD40-130o.3 | RD40-130o.3 | 5100047399 |
| RD28-120c | RD28-120c | 5100047377 |
| RD40-130c.3 | RD40-130c.3 | 5100047397 |
| RD45-140 C Tandem Roller | RD45-140 C | 5100011394 |
| RC70p US | RC70p US | 5100047416 |
| RD40-130 C Tandem Roller | RD40-130C US | 5100021803 |
| RC50p | RC50p | 5100047389 |
| RD28-120 Tandem Roller | RD28-120 US | 5100021756 |
| RD28-120o | RD28-120o | 5100047379 |
| RD45-140.3 | RD45-140.3 | 5100047396 |
| RD18-100c.3 | RD18-100c.3 | 5100055948 |
| RD40-130 O Tandem Roller | RD40-130O US | 5100021805 |
| RD27-120 O Tandem Roller | RD27-120 O | 5100011390 |
| RD27-120c | RD27-120c.3 | 5100047371 |
| RC50 US | RC50 US | 5100047413 |
| RD18-100 C Tandem Roller | RD18-100 C US | 5100027574 |
| Vibration Roller | RD18-80 SE | 5100044988 |
| RD 24-100.3 | RD 24-100.3 | 5100032197 |
| RD40-130o | RD40-130o | 5100047386 |
| RD18 | RD18-100.3 | 5100055947 |
| RD28-120 | RD28-120 | 5100047375 |
| RD28-120c DPF | RD28-120c DPF | 5100047392 |
| RD45-140o DPF | RD45-140o DPF | 5100055782 |
| RD45-140o.3 | RD45-140o.3 | 5100047400 |
| RD40-130 C Tandem Roller | RD40-130 C | 5100011393 |
| RD18-100 C Tandem Roller | RD18-100 C | 5100011384 |
| RD45-140 O Tandem Roller | RD45-140 O | 5100011396 |
| RD18-80.3 | RD18-80.3 | 5100055946 |
| RD24-100 C Tandem Rollers | RD24-100 C | 5100011387 |
| RD40-130.3 | RD40-130.3 | 5100047395 |
| RD24-100o.3 | RD24-100o.3 | 5100047372 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
