Wacker Neuson

Wacker Neuson 5100011736 O-Ring Seal

$4.61
(No reviews yet) Write a Review
SKU:
5100011736-Wacker Neuson
Adding... The item has been added

The Wacker Neuson 5100011736 O-Ring Seal is a genuine OEM sealing component designed for the RD-series tandem rollers and RC110 single-drum soil compactors. As a direct OEM replacement, this O-Ring Seal is manufactured to the exact material and dimensional specifications required for proper sealing performance across the full range of compatible machines. Fitment covers a wide span of the Wacker Neuson roller lineup, including RD18, RD24, RD27, RD28, RD40, and RD45 tandem roller variants, as well as RC110 US ROPS and RC110 US CAB compactors. Stocking the 5100011736 as a service part keeps your compaction equipment ready for scheduled maintenance and unplanned seal replacements alike.

Key Features

  • Genuine OEM Sealing Material — Manufactured to Wacker Neuson's specified elastomer compound, ensuring the correct compression set and chemical resistance for hydraulic and fluid-contact applications in compaction equipment.
  • Drop-In Dimensional Fit — Matches the exact cross-section and inner diameter of the original seal, seating correctly in the groove without modification or shimming.
  • Broad RD and RC Series Compatibility — A single part number covers RD18, RD24, RD27, RD28, RD40, and RD45 tandem roller variants, plus RC110 US ROPS and RC110 US CAB soil compactors, including DPF, open-drum, and combination configurations.
  • Prevents Fluid Leak Paths — A correctly seated O-Ring Seal maintains system pressure and keeps hydraulic fluid or lubricants contained, preventing contamination of surrounding components and loss of operating efficiency.
  • Supports Scheduled Seal Service — O-ring replacement at recommended intervals is a low-cost step that protects higher-value hydraulic components from the damage caused by a degraded or extruded seal.

An O-ring seal is a circular elastomeric ring that sits in a machined groove and creates a pressure-tight barrier between two mating surfaces or around a shaft or port. In compaction equipment like the RD-series tandem rollers and RC110 compactors, O-ring seals are used throughout the hydraulic system, drum drive assemblies, and fluid reservoirs to prevent leaks and maintain the operating pressures that drive compaction performance. When an O-ring degrades — through heat cycling, compression set, or chemical exposure — it loses its ability to seal, leading to fluid loss, pressure drop, and potential damage to downstream components. Replacing a worn O-ring promptly with the correct OEM part restores the integrity of the sealed system and protects the surrounding assembly.

Part Details

Part Number5100011736
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionO-Ring Seal

Compatibility & Fitment

Name Model Machine Number
RD45-140 O Tandem Roller RD45-140O US 5100021806
RD45-140 O Tandem Roller RD45-140 O 5100011396
RD28-120 Tandem Roller RD28-120 US 5100021756
RD24-100c RD24-100c 5100047376
RD45-140o DPF RD45-140o DPF 5100055782
RD18-80 RD18-80 5100047360, 5100011382, 5100055774
Compactor RC110 US Rops RC110 US Rops 5100056461
RD24-100 C Tandem Roller RD24-100C US 5100021757
RD45-140 C Tandem Roller RD45-140C US 5100021804
RD45-140 Tandem Roller RD45-140 US 5100021802
RD40-130 O Tandem Roller RD40-130O US 5100021805
RD40-130.3 RD40-130.3 5100047395
RD24e-100o RD24-100oe 5100066735
RD24-100 DPF RD24-100 DPF 5100047380
RD18-100c.3 RD18-100c.3 5100055948
RD40-130c RD40-130c 5100047384
RD28-120 RD28-120 5100047375
RD18 RD18-100.3 5100055947
Vibration Roller RD18-100c 3 5100047363
RD40-130 O RD40-130 O 5100011395
RD28-120 O Tandem Roller RD28-120O US 5100021800
RD45-140o.3 RD45-140o.3 5100047400
RD 24-100.3 RD 24-100.3 5100032197
RD28-120c RD28-120c 5100047377
RD40-130 Tandem Roller RD40-130 5100011391, 5100047382
RD45-140 RD45-140 5100047383, 5100011392
RD27-120 Tandem Roller RD27-120 5100011386
RD18-100 RD18-100 5100055775, 5100011383, 5100047361
RD28-120 C Tandem Roller RD28-120C US 5100021758
RD27-120 RD 27-120.3 5100032198
RD28e-120 RD28-120e 5100066732
Compactor RC110p US Rops RC110p US Rops 5100056462
RD27-120c RD27-120c.3 5100047371
RD45-140c.3 RD45-140c.3 5100047398
RD28e-120o RD28-120oe 5100066736
RD40-130 C Tandem Roller RD40-130 C 5100011393
RD28-120c DPF RD28-120c DPF 5100047392
RD40-130 DPF RD40-130 DPF 5100055777
RD 18-100 C RD18-100c 5100047362, 5100055776
RD24e-100c RD24-100ce 5100066733
RD40-130o.3 RD40-130o.3 5100047399
RD45-140.3 RD45-140.3 5100047396
RD27-120o RD27-120o.3 5100047373
RD40-130o DPF RD40-130o DPF 5100055781
RD24-100c.3 RD24-100c.3 5100047370
RD18-100 Tandem Roller RD18-100 US 5100027573
RD24-100o.3 RD24-100o.3 5100047372
RD24-100o RD24-100o 5100047378
Vibration Roller RD18-100 SE 5100044989
RD28e-120c RD28-120ce 5100066734
RD40-130o RD40-130o 5100047386
RD24-100 C Tandem Rollers RD24-100 C 5100011387
RD18-80 Tandem Roller RD18-80 US 5100027572
RD28-120o DPF RD28-120o DPF 5100047394
RD24-100 Tandem Roller RD24-100 US 5100021755
RD45-140c DPF RD45-140c DPF 5100055780
RD18-100 C Tandem Roller RD18-100 C US 5100027574
RD24e-100 RD24-100e 5100066731
RD24-100o DPF RD24-100o DPF 5100047393
RD45-140o RD45-140o 5100047387
RD40-130c.3 RD40-130c.3 5100047397
RD28-120 DPF RD28-120 DPF 5100047390
Vibration Roller RD18-80 SE 5100044988
RD40-130 Tandem Roller RD40-130 US 5100021801
Compactor RC110 US CAB RC110 US CAB 5100064270
RD24-100 O Tandem Roller RD24-100 O 5100011389
RD45-140 C Tandem Roller RD45-140 C 5100011394
RD40-130 C Tandem Roller RD40-130C US 5100021803
RD27-120 O Tandem Roller RD27-120 O 5100011390
RD24-100 Tandem Roller RD24-100 5100011385, 5100047374
RD18-100 C Tandem Roller RD18-100 C 5100011384
RD24-100 O Tandem Roller RD24-100O US 5100021759
RD28-120o RD28-120o 5100047379
RD24-100c DPF RD24-100c DPF 5100047391
RD40-130c DPF RD40-130c DPF 5100055779
Compactor RC110p US CAB RC110p US CAB 5100064271
RD45-140c RD45-140c 5100047385
RD45-140 DPF RD45-140 DPF 5100055778
RD18-80.3 RD18-80.3 5100055946
RD27-120 C Tandem Roller RD27-120 C 5100011388

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.