Wacker Neuson

Wacker Neuson 5000079641 Combo Blade Set

$126.11
(No reviews yet) Write a Review
SKU:
5000079641-Wacker Neuson
Adding... The item has been added

The Wacker Neuson 5000079641 is a genuine OEM Combo Blade Set designed for the CT48 series walk-behind concrete power trowels and CRT46 series ride-on concrete trowels. As a direct OEM replacement, this blade set is manufactured to the same tolerances and blade geometry as the original, ensuring consistent float and finish performance across the full CT48 and CRT46 model range. Whether you are running a CT48-8A, CT48-11A, CT48-13A-V, CT48-9, or any of the CT48AGP, CT48ADP, CT48AGT, CT48ADT, CT48AVP, or CT48AVT variants — including CE-configured units — this set covers a wide cross-section of the Wacker Neuson 48-inch walk-behind lineup. The CRT46KHN, CRT46KHO, and CRT46ASO ride-on models are also confirmed fitments, making 5000079641 a versatile blade set to stock on active concrete finishing jobsites.

Key Features

  • OEM Blade Geometry — Manufactured to the same blade pitch, width, and edge profile as the original set, preserving the trowel's designed float-to-finish transition.
  • Combo Configuration — Includes both float and finish blades in a single set, allowing the operator to switch finishing modes without sourcing separate blade kits.
  • Broad CT48 and CRT46 Coverage — Confirmed fit across CT48-8A, CT48-11A, CT48-13A-V, CT48-9, CT48AGP, CT48ADP, CT48AGT, CT48ADT, CT48AVP, CT48AVT, CRT46KHN, CRT46KHO, and CRT46ASO models, including CE and variable-speed variants.
  • Surface Finish Quality — Worn or improperly spec'd blades produce drag marks, chatter, and uneven surface texture; correct blade geometry keeps the concrete surface flat and consistently finished.
  • Genuine OEM Sourcing — Supplied under Wacker Neuson part number 5000079641, confirming this is the same blade set the machines were built and tested with.

Trowel blades are the direct contact point between the machine and the concrete surface. On a walk-behind or ride-on power trowel, the blades rotate at high speed and progressively compact and smooth the concrete as it transitions from plastic to hardened. A combo blade set provides the flexibility to float fresh concrete and then finish the surface as it stiffens, without swapping to an entirely different blade type. When blades become worn, bent, or mismatched in pitch, the trowel loses surface contact consistency, leading to uneven finishes, excessive vibration, and operator fatigue — making timely blade replacement essential to achieving a professional result.

Part Details

Part Number5000079641
Old Part Number0079641
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionCombo Blade Set

Compatibility & Fitment

Name Models Machine Number
1220mm/48in CE Variable Speed Walk-behind Trowel CT48AVP 5000009220, 5000009219
1220mm/48in CE Walk-behind Tro wel CT48AGP 5000007603, 5000007602
1220mm/48in CE Walk-behind Tro wel CT48ADP-E 5000008027, 5000008028
1220mm/48in CE Walk-behind Tro wel CT48AGP-E 5000008031, 5000008032
1220mm/48in CE Walk-behind Tro wel CT48ADT 5000008040, 5000008015
1220mm/48in Variable Speed Wal k-behind Trowel CT48AVT 5000009217, 5000009218
1220mm/48in Walk-behind Trowel CT48ADP 5000007598, 5000007599, 5000008199
1220mm/48in Walk-behind Trowel CT48ADT-E 5000008016, 5000007597
1220mm/48in Walk-behind Trowel CT48BDT 5000008017
1220mm/48in Walk-behind Trowel CT48AGT 5000008019, 5000008041
1220mm/48in Walk-behind Trowel CT48AGT-E 5000008020, 5000007601
CRT46ASO CRT46ASO 5000007514
CRT46KHN CRT46KHN 5000007515
CRT46KHO CRT46KHO 5000007641
CT48-8A CT48-8A EU 5000620837
CT48-8A Trowel CT48-8A 5000009449
CT48-9 CT48-9 5000620838, 5000009453
CT48-11A Trowel CT48-11A 5000009450, 5000620835
CT48-13A-V Trowel CT48-13A-V 5000009452, 5000620836

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.