The Wacker Neuson is a genuine OEM Engine Honda GX240UT2X-QA2 designed for the CT36 and CT48 series walk-behind concrete power trowels. This is a direct factory-sourced engine assembly, ensuring the correct configuration, mounting, and output specifications for compatible Wacker Neuson trowel models. Fitment spans a wide range of CT36 and CT48 variants including the CT36-8A, CT36-8A-V, CT48-8A, CT36AGP, CT36AGT, CT36AVP, CT36AVT, CT48ADP, and CT48ADT series. Sourcing a genuine OEM unit means the engine arrives pre-configured to the exact specification Wacker Neuson requires for these machines.
Key Features
- Genuine OEM Engine Assembly — Sourced directly from Wacker Neuson, this Honda GX240UT2X-QA2 unit meets the exact displacement, output, and configuration requirements for CT-series trowel applications.
- Broad CT36 and CT48 Compatibility — Covers a wide range of walk-behind concrete trowel variants including 915mm/36in and 1220mm/48in models in standard, CE, and variable-speed configurations.
- Drop-In Engine Replacement — Mounting points, shaft dimensions, and accessory drive locations match the original installation, supporting a straightforward swap on compatible trowel frames.
- Consistent Power Delivery for Troweling Performance — A correctly specified engine maintains the rotor speed and torque needed to produce a flat, burnished concrete surface; an underperforming or failing engine leads to uneven blade contact and poor finish quality.
- Fuel System Integrity — As a complete engine unit, the carburetion and ignition components are matched to the GX240UT2X-QA2 spec, reducing the risk of fuel delivery or starting issues common with mismatched assemblies.
The Honda GX240UT2X-QA2 is an air-cooled, four-stroke gasoline engine used to drive the gearbox and rotor assembly on Wacker Neuson CT-series walk-behind concrete trowels. It provides the rotational power that spins the trowel blades across a freshly poured concrete slab, allowing operators to achieve the desired surface finish — from a float pass through to a hard-trowel polish. When the engine loses power, runs roughly, or fails to start, blade speed drops below the threshold needed for effective finishing, and the concrete can set before the work is complete. Replacing a worn or damaged engine with the correct OEM unit restores the machine to its original operating specification and protects the quality of the finished slab.
Part Details
| Part Number | 5000112134 |
|---|---|
| Old Part Number | 0112134 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Engine Honda GX240UT2X-QA2 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| CT36-8A-V | CT36-8A-V | 5000620832, 5000009442 |
| CT36-8A Trowel | CT36-8A | 5000009439, 5000620831 |
| CT48-8A Trowel | CT48-8A | 5000009449 |
| CT48-8A | CT48-8A EU | 5000620837 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000006729, 5000006730, 5100058535, 5100058536 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| Reversible Plates | MPU 29A | 5000630244 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.