The Wacker Neuson is a genuine OEM Washer, Flat, 5/8 designed for a wide range of Wacker Neuson hydronic surface heaters, ground heaters, and indirect air heaters. As a direct OEM replacement, this washer is manufactured to the exact dimensions and material specifications required for proper clamping force and load distribution across the fastened joint. Compatible with the E3000, E2200, E5000, HI770XHD, HI1000DGM, HSH700, Pureheat, Arctic Bear HD, Arctic Bear XHD, S3000, CH5000, MC5200, and E700M series, part number covers an exceptionally broad range of Wacker Neuson heating and surface heating equipment. Sourcing the correct OEM washer ensures fastener assemblies maintain the torque retention and surface contact needed to keep structural and mechanical connections secure under demanding jobsite conditions.
Key Features
- OEM-Spec Load Distribution: — Manufactured to original equipment dimensions for consistent bearing surface area, preventing fastener pull-through and joint deformation under load.
- Direct-Fit Hardware Replacement: — Sized at 5/8 inch to drop directly onto existing fastener assemblies without modification to surrounding hardware or mounting points.
- Extensive Fitment Coverage: — A single part number covering E3000, E2200, E5000, HI770XHD, HI1000DGM, HSH700, Pureheat, Arctic Bear HD and XHD, S3000, CH5000, MC5200, and E700M series machines.
- Fastener Joint Integrity: — Maintains proper clamp load across bolted connections; worn or undersized washers allow fasteners to loosen over time, leading to structural play and accelerated wear on surrounding components.
- Genuine Wacker Neuson OEM Part: — Sourced directly from Wacker Neuson, ensuring the material grade and dimensional tolerances match what was installed at the factory on heating and hydronic equipment.
A flat washer serves as the interface between a fastener — such as a bolt or nut — and the surface it bears against. By spreading the clamping force over a wider area, the washer protects the mating surface from damage and helps the fastener maintain its holding strength over time. When a washer is missing, worn thin, or incorrectly sized, the fastener can work loose or bite into the surrounding material, compromising the integrity of the assembly and requiring more extensive repairs down the line.
Part Details
| Part Number | 5000167760 |
|---|---|
| Old Part Number | 0167760 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Washer, Flat, 5/8 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| HI 770 XHD Indirect Air Heater, Diesel, 2x12 | Arctic Bear XHD | 5000620676 |
| HI 770 XHD Indirect Air Heater, Diesel, 1x16 | HI770XHD | 5000620183, 5200003814, 5200004934, 5100049894 |
| HSH700 | HSH700G | 5000620243 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| E5000 GROUND HEATER, W/GAS BURNER | E5000 | 5000620898, 5000620897, 5000620899 |
| HP252 | HP252 | 5000620249 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620246, 5000620190, 5000620220 |
| HI770XHD Indirect Heater | Arctic Bear XHD NS | 5000620690 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| Hydronic Surface Heater w/ Gen erator, 3000 ft hose | S3000 | 5000620218, 5000620182 |
| Mobile Drying System | MC5200 | 5000620201, 5000620232 |
| Indirect Mobile Air Heater, Na tural Gas | Arctic Bear HD | 5000620199, 5000620197 |
| HI1000 Indirect Air Heater, DGM, Electric Break | HI1000DGM | 5200011234, 5200011235, 5100049275, 5100049276 |
| Hydronic Surface Heater, 700m hose | E700M | 5000620195 |
| Cross Heater with oil burner | CH5000 | 5000620240, 5000620242 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
