The Wacker Neuson Genisys Beckett Alarm Module is a genuine OEM component designed for a wide range of Wacker Neuson hydronic ground heaters and indirect air heaters, including the E3000, E2200, E5000, E1100, E1250, HI1000, HI900D, and Pureheat series. As a direct OEM replacement, this alarm module is manufactured to the same specifications as the original unit installed at the factory, ensuring seamless integration with your machine's burner control system. Whether you're running a ground heater on a winter concrete pour or keeping a hydronic surface heater running through a cold-weather project, this is the correct part to restore proper alarm and burner lockout functionality. Verify your model number against the fitment list before ordering to confirm compatibility.
Key Features
- Correct Electrical Specification for Burner Control — Engineered to the precise voltage and signal output required by Beckett Genisys burner control systems, ensuring accurate fault detection and alarm response.
- Genuine OEM Part — Sourced directly from Wacker Neuson, this is the same alarm module supplied in new equipment — not an approximation or substitute.
- Broad Heater Series Compatibility — Fits E3000, E2200, E5000, E1100, E1250, E1250S, E1250B, E1250P, E3000ES, HI1000, HI1000DGM, HI900D, HI750D, and Pureheat series hydronic and indirect air heaters.
- Direct Drop-In Replacement — Matches the original mounting configuration and wiring interface of the factory-installed module, allowing straightforward reinstallation without circuit modification.
- Restores Burner Lockout Protection — A failed alarm module can prevent proper burner fault signaling, leading to undetected ignition failures or uncontrolled burner cycling; replacing it restores the heater's ability to shut down safely on fault conditions.
- Critical Safety Control Component — This module governs alarm and lockout functions on fuel-fired heating equipment; using the correct OEM-specified part is essential for maintaining safe, code-compliant heater operation on the worksite.
The Genisys Beckett Alarm Module is the electronic control heart of the burner assembly on Wacker Neuson hydronic and indirect air heaters. It monitors ignition status and burner operation, triggering an alarm and initiating a safety lockout if the burner fails to light or experiences a fault condition. When this module fails, the heater may refuse to start, fail to shut down on a fault, or display incorrect alarm states — all of which compromise both equipment reliability and operator safety on cold-weather job sites.
Part Details
| Part Number | 5000181501 |
|---|---|
| Old Part Number | 0181501 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Genisys Beckett Alarm Module |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045 |
| E2200 GROUND HEATER, W/ LIFT BAIL | E2200 | 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449 |
| E5000 GROUND HEATER, W/DIESEL BURNER | E5000 | 5000620897, 5000620899 |
| Pureheat Hydronic Heater, Oil Burner | Pureheat | 5000620245, 5000620190 |
| E1250S | E1250S | 5200012355 |
| E1100 GROUND HEATER | E1100 | 5000620172, 5000620244, 5200001676 |
| E3000 ES Hydronic Surface Heater | E3000ES | 5000620968, 5000620967 |
| E12540B | E1250B | 5200012353 |
| Skid Mounted-Indirect Fired Ai r Heat, Diesel | HI750D | 5000620924 |
| E 1250P Hydronic Heater, Premium, Diesel | E1250P | 5200012357 |
| HI1000 Indirect Air Heater, Diesel w/Tank | HI1000 | 5200011232, 5200011233, 5100049274 |
| HI1000 Indirect Air Heater, DGM, Electric Break | HI1000DGM | 5200011234, 5200011235, 5100049275, 5100049276 |
| Skid Indirect Air Heaters, Die sel 4 x 12 | HI900D | 5200014160 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
