Wacker Neuson 5000181488 Beckett Genisys Control
Wacker Neuson

Wacker Neuson 5000181488 Beckett Genisys Control

$190.11
(No reviews yet) Write a Review
SKU:
5000181488-Wacker Neuson
Adding... The item has been added

The Wacker Neuson Beckett Genisys Control is a genuine OEM component designed for the E3000, E2200, E1100, E5000, HI750, HI900, and HI1000 series hydronic and indirect-fired air heaters. As a direct OEM replacement, this control module is built to the exact specifications Wacker Neuson requires for proper burner sequencing and ignition management across these heater platforms. Fitment spans a wide range of configurations including ground heaters, hydronic surface heaters, and indirect-fired air heaters — always confirm your model number before ordering. With a genuine part sourced directly from Wacker Neuson, you can be confident you are restoring the heater to its original operating parameters.

Key Features

  • OEM-Matched Ignition Sequencing — Built to the exact electrical and timing specifications of the original Beckett Genisys control, ensuring the burner fires, proves flame, and shuts down correctly every cycle.
  • Direct Plug-In Replacement — Matches the original wiring harness connections and mounting footprint, allowing straightforward swap-out without splicing or adapter modifications.
  • Broad Heater Series Coverage — Compatible with E1100, E2200, E3000, E3000 ES, E5000, Pureheat, HI750, HI900, and HI1000 series heaters across ground, hydronic surface, and indirect-fired air configurations.
  • Restored Burner Reliability — A failed or faulted Genisys control causes no-start conditions, nuisance lockouts, or uncontrolled burner cycling; replacing it restores consistent, dependable heat output on the jobsite.
  • Electrical Safety Compliance — Fuel-burning heater controls carry critical safety logic for flame supervision and lockout; using a genuine OEM part ensures that protective shutdown functions operate exactly as Wacker Neuson engineered them.

The Beckett Genisys Control is the primary burner management module responsible for controlling the ignition sequence, monitoring flame presence, and triggering safety lockout if ignition or flame is not established within the programmed timing window. On hydronic and indirect-fired heaters, this control is the brain of the combustion system — when it functions correctly, the burner lights cleanly and the heater delivers steady, regulated heat output. When the control begins to fail, operators typically see hard lockouts, failure to ignite, or intermittent flame-out faults that prevent the heater from reaching operating temperature.

Part Details

Part Number5000181488
Old Part Number0181488
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionBeckett Genisys Control

Compatibility & Fitment

Name Model Machine Number
E3000 Hydronic Surface Heater with generator E3000 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100017801, 5100056440, 5100025045
E2200 GROUND HEATER, W/ LIFT BAIL E2200 5000620215, 5000620176, 5000620216, 5000620226, 5100017448, 5100017449
E5000 GROUND HEATER, W/DIESEL BURNER E5000 5000620897, 5000620899
Pureheat Hydronic Heater, Oil Burner Pureheat 5000620245, 5000620190
E1100 GROUND HEATER E1100 5000620172, 5000620244, 5200001676
E3000 ES Hydronic Surface Heater E3000ES 5000620968, 5000620967
HI750 DGM HEATER-INDIRECT HI750GM 5000620859, 5000620930
Mobile Indirect Fired Air Heat er, Diesel HI750D 5000620856, 5000620923, 5000620924
HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 HI750GMHD 5000620969
HI750G HEATER-INDIRECT HI750G 5000620857
Factory-Installed Options Factory-Installed Options 5200004152
HI1000 Indirect Air Heater, Diesel w/Tank HI1000 5200011232, 5200011233, 5100049274
HI1000 Indirect Air Heater, DGM, Electric Break HI1000DGM 5200011234, 5200011235, 5100049275, 5100049276
HI900 Heater-DGM,Srg,-40 HI900DGM 5200014221, 5200014222, 5200014165, 5200014166
HI 900D Heater-Indirect HI900D 5200014158, 5200014159, 5200014160

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.