The Wacker Neuson 1.62 OD U-Bolt Chrome Plated Clamp is a genuine OEM component designed for the HI260, E1250P, HI1000, HI1000DGM, and HI900DGM series indirect air and hydronic heaters. As a factory-sourced part, the is manufactured to the exact dimensions and finish specified by Wacker Neuson, ensuring a drop-in fit with no guesswork. This clamp is confirmed to span multiple heater configurations across the HI series lineup, making it a practical stocking item for dealers and service technicians running these units. When it comes to securing hose or pipe connections on heating equipment, getting the right clamp diameter and plating spec matters — this is the part the machine was built with.
Key Features
- Chrome Plated Corrosion Resistance — The chrome plating on this U-bolt clamp guards against rust and surface degradation in the wet, condensation-prone environments typical of indirect air and hydronic heater operation.
- Correct 1.62 OD Diameter — Sized at 1.62 inches outer diameter, this clamp seats correctly around the intended hose or pipe without over-compression or gap — critical for leak-free connections in a heating system.
- Genuine Wacker Neuson OEM Part — Sourced directly through Wacker Neuson, part number 5000192640 matches the original specification used in production, with no substitution of materials or dimensions.
- Broad HI Series Compatibility — Fits the HI260, HI1000, HI1000DGM, and HI900DGM heater families, as well as the E1250P Hydronic Heater, covering both diesel and electric brake trailer configurations.
- Secure Hose and Line Retention — A failed or incorrectly sized clamp can allow coolant or combustion air lines to loosen under vibration or thermal cycling, leading to heat loss, fluid leaks, or heater shutdown on the job.
- Fuel and Fluid System Integrity — On heating equipment, a properly torqued and correctly spec'd clamp is essential to maintaining sealed connections in fuel and coolant circuits — using the OEM part keeps those connections to the designed pressure rating.
A U-bolt clamp is a fastening component used to secure hoses, pipes, or tubing to a fixed point or to one another, holding them in position and preventing movement under vibration or pressure. On indirect air and hydronic heaters like the Wacker Neuson HI and E series units, these clamps play a key role in keeping coolant lines, fuel lines, and air ducting sealed and properly routed. When a clamp loosens, corrodes, or is replaced with an incorrect size, connections can weep or separate — causing fluid loss, heat output drops, or unplanned equipment shutdowns in cold-weather jobsite conditions.
Part Details
| Part Number | 5000192640 |
|---|---|
| Old Part Number | 0192640 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | 1.62 OD U-Bolt Chrome Plated Clamp |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| HI260 HEATER,OIL WITH TANK | HI260 | 5200018503 |
| E 1250P Hydronic Heater, Premium, Diesel | E1250P | 5200012357 |
| HI1000 Indirect Air Heater, Diesel w/Tank | HI1000 | 5200011232, 5200011233, 5100049274 |
| HI1000 Indirect Air Heater, DGM, Electric Break | HI1000DGM | 5200011234, 5200011235, 5100049275, 5100049276 |
| HI900 Heater-DGM,Srg,-40 | HI900DGM | 5200014221, 5200014222 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
