The Wacker Neuson Carburetor Gasket is a genuine OEM carburetor gasket designed for a broad range of Wacker Neuson equipment, including MP12, MP15, and MP20 single direction plates, MG3 portable generators, MCP2 and MCP3 water pumps, MFS735 gasoline powered floor saws, and GS3500Gi inverter generators. As a direct OEM part, the is manufactured to the exact material and dimensional tolerances of the original component, ensuring a consistent, leak-free seal at the carburetor interface. This gasket is the correct service replacement for all listed models and is sourced directly through Wacker Neuson's authorized parts supply chain. Keep a spare on hand to minimize fuel system service downtime across your fleet.
Key Features
- Fuel-Tight OEM Sealing Material — Manufactured from the same gasket compound used at production, maintaining compression and fuel resistance specific to Wacker Neuson small-engine carburetors.
- Drop-In Carburetor Replacement — Matches the original bolt pattern and port dimensions exactly, seating directly between the carburetor body and engine intake without trimming or shimming.
- Wide Model Coverage — A single part number services MP12, MP15, MP20 plates, MG3 generators, MCP2 and MCP3 pumps, MFS735 floor saws, BFS735c, PG2c, GS3500Gi, D3.5G2, D3.5G3, and ZEN-L series compaction plates.
- Prevents Fuel Leaks and Air Ingestion — A degraded carburetor gasket allows unmetered air into the fuel circuit, causing lean running, hard starting, and erratic engine behavior; replacing it restores proper air-fuel mixture control.
- Fuel System Safety Compliance — A correctly seated carburetor gasket eliminates external fuel seepage at the carburetor joint, an important safeguard on gasoline-powered equipment operating near heat sources or in enclosed work areas.
- Genuine Wacker Neuson OEM Part — Supplied under part number 5000408496 and traceable through Wacker Neuson's authorized parts network, confirming correct specification for every listed machine.
A carburetor gasket forms the sealing layer between the carburetor and the engine's intake port, preventing fuel vapors and raw fuel from escaping the joint while also stopping uncontrolled air from entering the fuel circuit. When this gasket hardens, cracks, or compresses unevenly over time, the engine may exhibit rough idling, difficulty starting, or a persistent fuel smell during operation. Replacing a worn carburetor gasket is a straightforward first step in any carburetor service procedure and is essential for restoring consistent engine performance on compaction plates, generators, pumps, and saws.
Part Details
| Part Number | 5000408496 |
|---|---|
| Old Part Number | 0408496 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Single Direction Plates | ZEN-L 12W | 5100072719 |
| Single Direction Plates | ZEN-L 15W | 5100072721 |
| Single Direction Plates | ZEN-L 20W | 5100072723 |
| MP15 | MP15 | 5100054291 |
| Single Direction Plates | MP12 | 5100067424, 5100075679, 5100055366, 5000630380 |
| Single Direction Plates | MP20 | 5000630379 |
| Floor Saws | MFS735-CN | 5000630435 |
| Portable Generators | MG3-CE | 5000630384, 5100055609 |
| Portable Generators | MG3-AU | 5000630385 |
| Portable Generators | MG3-CL | 5000630387 |
| Portable Generators | MG3-LA | 5000630388 |
| Portable Generators | MG3-CN | 5000630390 |
| Portable Generators | MG3-ME | 5000630391 |
| Pump | MCP2X | 5000630422 |
| Water Pump | MCP2-CN | 5000630437 |
| Gasoline Powered Floor Saw | MFS735 | 5100055201 |
| MCP2 | MCP2-CE | 5100056321 |
| Pump | MCP3-CE | 5100067952 |
| Modular Internal Vibrators | D3.5G2 | 5100072196 |
| Modular Internal Vibrators | D3.5G3 | 5100072403 |
| Single Direction Plates | ZEN-L 12 | 5100072720 |
| Single Direction Plates | ZEN-L 15 | 5100072722 |
| Single Direction Plates | ZEN-L 20 | 5100072724 |
| Single Direction Plates | ZEN-C 20 | 5100073053 |
| BFS735c | BFS735c | 5100079275 |
| PG2c | PG2G-c CE | 5100079342 |
| GS3500Gi | GS3500Gi CE | 5100079448 |
| GS3500Gi | GS3500Gi CN | 5100079595 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
