The Wacker Neuson Rubber Insert 115x3 is a genuine OEM component designed for the RD7 and RD10 series double drum rollers, including the RD7H, RD7Heh, RD7Yeh LRC, RD7Yeh HRC, RD7Hf, RD7Hehf, RD7Yehf LRC, RD7Yehf HRC, RD7Hfb, RD7Hehfb, RD7Yehfb LRC, RD7Yehfb HRC, and RD10Yehf LRC models. Sourced directly from Wacker Neuson, this insert meets the exact material and dimensional standards of the original part. Keeping the correct rubber insert in place is essential for maintaining proper drum isolation and protecting the machine's frame and operator platform from excessive vibration. Cross-reference part number against your machine's parts manual before ordering to confirm the right fit for your specific model variant.
Key Features
- OEM Rubber Compound Grade — Manufactured to Wacker Neuson's specified rubber density and durometer, ensuring consistent compression response and isolation performance across the service life of the insert.
- Drop-In Replacement — Matches the original 115x3 profile exactly, seating into the same mounting groove without modification to surrounding hardware or drum assembly components.
- Broad RD7 and RD10 Series Compatibility — A single part number covers a wide range of RD7 and RD10 series roller configurations, including HRC, LRC, and combined exciter variants, simplifying parts stocking for mixed fleets.
- Sustained Vibration Isolation — A worn or hardened rubber insert allows vibration energy to transfer directly into the frame and operator station, accelerating wear on structural mounts and degrading compaction control. A fresh insert restores full isolation behavior.
- Genuine Wacker Neuson Part — Supplied as a genuine OEM component, this insert is held to the same production tolerances as the part installed at the factory, with no substitution of rubber grades or dimensional compromises.
A rubber insert in a double drum roller acts as a vibration isolator, absorbing and dampening the high-frequency excitation generated by the drum's eccentric shaft before it reaches the machine frame and operator platform. This isolation is critical for protecting both the machine's structural components and the operator from prolonged exposure to damaging vibration levels. When the rubber hardens, cracks, or takes a permanent set from age or heat exposure, isolation breaks down — leading to increased stress on frame welds, premature wear of adjacent components, and a rougher, less controlled compaction output.
Part Details
| Part Number | 5100006733 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Rubber Insert 115x3 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD7Yehf HRC | RD7Yehf HRC | 5100006337, 5100006341 |
| RD7H | RD7H | 5100006333 |
| RD7Heh | RD7Heh | 5100006334 |
| RD7Yeh LRC | RD7Yeh LRC | 5100006335 |
| RD7Yeh HRC | RD7Yeh HRC | 5100006336, 5100006467 |
| RD7Hf | RD7Hf | 5100006338 |
| RD7Hehf | RD7Hehf | 5100006339 |
| RD7Yehf LRC | RD7Yehf LRC | 5100006340 |
| RD7Hfb | RD7Hfb | 5100006343 |
| RD7Hehfb | RD7Hehfb | 5100006344 |
| RD7Yehfb LRC | RD7Yehfb LRC | 5100006345 |
| RD7Yehfb HRC | RD7Yehfb HRC | 5100006346 |
| RD10Yehf LRC | RD10Yehf LRC | 5100070502 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
