The Wacker Neuson Pipe Clip is a genuine OEM component designed for the RD24-100, RD27-120, RD28-120, RD40-130, RD45-140, and RC110 series tandem rollers. As a factory-authorized part, it is manufactured to the exact specifications Wacker Neuson requires for proper pipe routing and retention on these machines. This clip spans a wide range of model variants — including standard, cab, open-ROPS, and DPF-equipped configurations — making a high-coverage replacement for fleet operators and service technicians. Confirm your serial number against the fitment list before ordering to ensure a correct, direct swap.
Key Features
- OEM-Spec Retention Strength — Manufactured to Wacker Neuson's original grip and dimensional tolerances, ensuring the clip secures pipe runs without flex, creep, or loosening under vibration.
- Drop-In Replacement — Matches original mounting points and pipe diameter exactly, so installation requires no rework of surrounding hardware or pipe routing.
- Broad Tandem Roller Coverage — Fits RD24-100, RD27-120, RD28-120, RD40-130, RD45-140, and RC110 series machines across standard, cab, open, DPF, and ROPS variants.
- Vibration-Resistant Pipe Management — On high-cycle compaction equipment, unsecured or worn pipe clips allow hydraulic or fuel lines to chafe and fatigue — a correctly seated clip keeps lines fixed and protected through continuous operation.
- Genuine Wacker Neuson Part — Sourced directly through the Wacker Neuson OEM supply chain, so you receive the same component fitted at the factory rather than a dimensional approximation.
A pipe clip secures hydraulic, fuel, or fluid lines to the machine's frame or structural members, preventing movement and vibration-induced wear along the pipe's outer surface. On compaction equipment like tandem rollers — which generate sustained vibration through every pass — unsecured lines are exposed to constant flexing that accelerates fatigue cracking and chafing against adjacent components. When a pipe clip fails or goes missing, the unrestrained line can contact hot surfaces, sharp edges, or moving parts, leading to leaks or line failure that takes the machine out of service.
Part Details
| Part Number | 5100033263 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Pipe Clip |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD24-100 Tandem Roller | RD24-100 | 5100011385, 5100047374 |
| RD27-120 Tandem Roller | RD27-120 | 5100011386 |
| RD24-100 C Tandem Rollers | RD24-100 C | 5100011387 |
| RD27-120 C Tandem Roller | RD27-120 C | 5100011388 |
| RD24-100 O Tandem Roller | RD24-100 O | 5100011389 |
| RD27-120 O Tandem Roller | RD27-120 O | 5100011390 |
| RD40-130 Tandem Roller | RD40-130 | 5100011391, 5100047382 |
| RD45-140 Tandem Roller | RD45-140 | 5100011392, 5100047383 |
| RD40-130 C Tandem Roller | RD40-130 C | 5100011393 |
| RD45-140 C Tandem Roller | RD45-140 C | 5100011394 |
| RD40-130 O | RD40-130 O | 5100011395 |
| RD45-140 O Tandem Roller | RD45-140 O | 5100011396 |
| RC110 | RC110 | 5100030674 |
| RC110P | RC110P | 5100030675 |
| RD 24-100.3 | RD 24-100.3 | 5100032197 |
| RD27-120 | RD 27-120.3 | 5100032198 |
| RD24-100c.3 | RD24-100c.3 | 5100047370 |
| RD27-120c | RD27-120c.3 | 5100047371 |
| RD24-100o.3 | RD24-100o.3 | 5100047372 |
| RD27-120o | RD27-120o.3 | 5100047373 |
| RD28-120 | RD28-120 | 5100047375 |
| RD24-100c | RD24-100c | 5100047376 |
| RD28-120c | RD28-120c | 5100047377 |
| RD24-100o | RD24-100o | 5100047378 |
| RD28-120o | RD28-120o | 5100047379 |
| RD24-100 DPF | RD24-100 DPF | 5100047380 |
| RD40-130c | RD40-130c | 5100047384 |
| RD45-140c | RD45-140c | 5100047385 |
| RD40-130o | RD40-130o | 5100047386 |
| RD45-140o | RD45-140o | 5100047387 |
| RD28-120 DPF | RD28-120 DPF | 5100047390 |
| RD24-100c DPF | RD24-100c DPF | 5100047391 |
| RD28-120c DPF | RD28-120c DPF | 5100047392 |
| RD24-100o DPF | RD24-100o DPF | 5100047393 |
| RD28-120o DPF | RD28-120o DPF | 5100047394 |
| RD40-130.3 | RD40-130.3 | 5100047395 |
| RD45-140.3 | RD45-140.3 | 5100047396 |
| RD40-130c.3 | RD40-130c.3 | 5100047397 |
| RD45-140c.3 | RD45-140c.3 | 5100047398 |
| RD40-130o.3 | RD40-130o.3 | 5100047399 |
| RD45-140o.3 | RD45-140o.3 | 5100047400 |
| RD40-130 DPF | RD40-130 DPF | 5100055777 |
| RD45-140 DPF | RD45-140 DPF | 5100055778 |
| RD40-130c DPF | RD40-130c DPF | 5100055779 |
| RD45-140c DPF | RD45-140c DPF | 5100055780 |
| RD40-130o DPF | RD40-130o DPF | 5100055781 |
| RD45-140o DPF | RD45-140o DPF | 5100055782 |
| Compactor RC110 US Rops | RC110 US Rops | 5100056461 |
| Compactor RC110p US Rops | RC110p US Rops | 5100056462 |
| Compactor RC110 US CAB | RC110 US CAB | 5100064270 |
| Compactor RC110p US CAB | RC110p US CAB | 5100064271 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
