The Wacker Neuson Countersunk Screw is a genuine OEM countersunk screw designed for the RD24-100, RD27-120, RD27-120, RD40-130, and RD45-140 series tandem rollers, as well as RC110 and RC110P compactors. As a factory-sourced component, the meets the exact material and dimensional tolerances set during original equipment assembly, ensuring a flush, secure installation every time. This part covers an extensive range of RD-series variants — including standard, cab, open-ROPS, DPF, and electric configurations — making it a widely applicable hardware item for Wacker Neuson roller fleets. Cross-reference your machine's serial number against the fitment list below to confirm compatibility before ordering.
Key Features
- Genuine OEM Hardware Grade — Manufactured to the same hardness class and thread specification as the original screw, so clamping force and torque values remain consistent with machine design.
- Flush-Mount Countersunk Profile — The countersunk head seats fully flush with the mating surface, preventing interference with adjacent components and maintaining the intended surface clearance on the roller assembly.
- Broad RD-Series and RC-Series Coverage — Confirmed fit across RD24-100, RD27-120, RD28-120, RD40-130, and RD45-140 tandem rollers in standard, cab, open-ROPS, DPF, and electric variants, plus RC110 and RC110P compactors.
- Structural Integrity at the Fastener Level — A correctly torqued, undamaged countersunk screw keeps panels, guards, and housings firmly located; a stripped or missing screw can allow components to shift under the vibration loads typical of compaction work.
- Direct OEM Source — Supplied under Wacker Neuson part number 5100033270, so you are ordering the exact item listed in the original parts diagram — no substitution guesswork required.
A countersunk screw is a fastener with a tapered, cone-shaped head that is designed to sit flush with — or just below — the surface of the material it secures. On tandem rollers and compactors, countersunk screws are commonly used to attach panels, covers, and structural brackets where a protruding fastener head would create a clearance problem or a snagging hazard. When a countersunk screw becomes stripped, corroded, or sheared, the component it holds can loosen under the continuous vibration generated during compaction passes, potentially leading to misalignment or component damage. Replacing a worn or damaged fastener promptly with the correct OEM part maintains the structural assembly as originally engineered.
Part Details
| Part Number | 5100033270 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Countersunk Screw |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD24-100 Tandem Roller | RD24-100 | 5100011385, 5100047374 |
| RD27-120 Tandem Roller | RD27-120 | 5100011386 |
| RD24-100 C Tandem Rollers | RD24-100 C | 5100011387 |
| RD27-120 C Tandem Roller | RD27-120 C | 5100011388 |
| RD24-100 O Tandem Roller | RD24-100 O | 5100011389 |
| RD27-120 O Tandem Roller | RD27-120 O | 5100011390 |
| RD40-130 Tandem Roller | RD40-130 | 5100011391, 5100047382 |
| RD45-140 Tandem Roller | RD45-140 | 5100011392, 5100047383 |
| RD40-130 C Tandem Roller | RD40-130 C | 5100011393 |
| RD45-140 C Tandem Roller | RD45-140 C | 5100011394 |
| RD40-130 O | RD40-130 O | 5100011395 |
| RD45-140 O Tandem Roller | RD45-140 O | 5100011396 |
| RC110 | RC110 | 5100030674 |
| RC110P | RC110P | 5100030675 |
| RD 24-100.3 | RD 24-100.3 | 5100032197 |
| RD27-120 | RD 27-120.3 | 5100032198 |
| RD24-100c.3 | RD24-100c.3 | 5100047370 |
| RD27-120c | RD27-120c.3 | 5100047371 |
| RD24-100o.3 | RD24-100o.3 | 5100047372 |
| RD27-120o | RD27-120o.3 | 5100047373 |
| RD28-120 | RD28-120 | 5100047375 |
| RD24-100c | RD24-100c | 5100047376 |
| RD28-120c | RD28-120c | 5100047377 |
| RD24-100o | RD24-100o | 5100047378 |
| RD28-120o | RD28-120o | 5100047379 |
| RD24-100 DPF | RD24-100 DPF | 5100047380 |
| RD40-130c | RD40-130c | 5100047384 |
| RD45-140c | RD45-140c | 5100047385 |
| RD40-130o | RD40-130o | 5100047386 |
| RD45-140o | RD45-140o | 5100047387 |
| RD28-120 DPF | RD28-120 DPF | 5100047390 |
| RD24-100c DPF | RD24-100c DPF | 5100047391 |
| RD28-120c DPF | RD28-120c DPF | 5100047392 |
| RD24-100o DPF | RD24-100o DPF | 5100047393 |
| RD28-120o DPF | RD28-120o DPF | 5100047394 |
| RD40-130.3 | RD40-130.3 | 5100047395 |
| RD45-140.3 | RD45-140.3 | 5100047396 |
| RD40-130c.3 | RD40-130c.3 | 5100047397 |
| RD45-140c.3 | RD45-140c.3 | 5100047398 |
| RD40-130o.3 | RD40-130o.3 | 5100047399 |
| RD45-140o.3 | RD45-140o.3 | 5100047400 |
| RD40-130 DPF | RD40-130 DPF | 5100055777 |
| RD45-140 DPF | RD45-140 DPF | 5100055778 |
| RD40-130c DPF | RD40-130c DPF | 5100055779 |
| RD45-140c DPF | RD45-140c DPF | 5100055780 |
| RD40-130o DPF | RD40-130o DPF | 5100055781 |
| RD45-140o DPF | RD45-140o DPF | 5100055782 |
| Compactor RC110 US Rops | RC110 US Rops | 5100056461 |
| Compactor RC110p US Rops | RC110p US Rops | 5100056462 |
| Compactor RC110 US CAB | RC110 US CAB | 5100064270 |
| Compactor RC110p US CAB | RC110p US CAB | 5100064271 |
| RD24e-100 | RD24-100e | 5100066731 |
| RD28e-120 | RD28-120e | 5100066732 |
| RD24e-100c | RD24-100ce | 5100066733 |
| RD28e-120c | RD28-120ce | 5100066734 |
| RD24e-100o | RD24-100oe | 5100066735 |
| RD28e-120o | RD28-120oe | 5100066736 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
