The Wacker Neuson Motor Housing Complete is a genuine OEM component designed for a wide range of Wacker Neuson vibratory plates, truss screeds, and internal vibrator systems, including the WP1540A, WP1550A, VP1340A, VP1550A, VP2050A, BPU2540A, and PT2A series. As a direct OEM replacement, the is manufactured to the same specifications as the original part, ensuring a correct fit without modification. This housing ships as a complete assembly, covering an extensive cross-section of Wacker Neuson compaction and concrete equipment built around the A-series power unit platform. Whether you are restoring a plate compactor to working condition or completing a scheduled overhaul, this part delivers the fit and function your machine was built with.
Key Features
- Genuine OEM Structural Integrity — Manufactured by Wacker Neuson to original housing tolerances, maintaining correct alignment of internal motor components and preventing vibration-induced stress fractures common in substandard housings.
- Complete Assembly — Supplied as a fully assembled motor housing unit, simplifying installation and eliminating the need to source individual housing components separately.
- Broad A-Series Platform Fitment — Compatible with WP1540A, WP1550A, VP1340A, VP1550A, VP2050A, BPU2540A, PT2A, BT24A, BT36A, HPG50A, HPG100A, and additional A-series Wacker Neuson machines — covering compactors, screeds, and modular vibrators.
- Protects Motor Performance — A sound motor housing keeps internal motor windings and bearings properly seated and shielded from dust, debris, and moisture; a cracked or damaged housing leads to premature motor failure and unplanned downtime on the compaction run.
- Verified OEM Part Number — Order with confidence using Wacker Neuson part number 5100050559, cross-referenced across dozens of documented serial number ranges and model variants in the Wacker Neuson parts catalog.
The motor housing on a vibratory plate compactor or concrete vibrator serves as the primary structural enclosure for the electric motor, holding the stator, rotor, and bearing seats in precise alignment during operation. It also acts as a first line of defense against jobsite contaminants — dirt, water, and concrete slurry — that would otherwise degrade motor windings and shorten service life. When a housing becomes cracked, warped, or damaged, internal components lose their alignment, leading to increased vibration, bearing wear, and ultimately motor seizure; replacing the housing complete as a unit restores the motor's operating geometry and extends the overall service life of the machine.
Part Details
| Part Number | 5100050559 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Motor Housing Complete |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| GV2500A | GV2500A | 5000009345, 5000009350 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009545, 5000009472, 5000630045 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043, 5000009486 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630046, 5100018330 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630044, 5100018323, 5100062423 |
| BPU2540A | BPU 2540A | 5000008758 |
| HP50A | HP50A | 5000009508 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HPG50A | HPG50A | 5000009509 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| VP1550AW-CN | VP1550AW-CN | 5100055200 |
| WP1540Aw | WP1540Aw US | 5100018327 |
| WP1540Aw | WP1540Aw | 5100018329 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| WP1550Aw | WP1550Aw | 5100016241, 5100062424 |
| WP1550Aw | WP1550Aw US | 5100018324 |
| WP1540A | WP1540A US | 5100018328 |
| WPU1550AW-US | WPU1550AW-US | 5100069715 |
| WPU1550Aw | WPU1550AW | 5100071591 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| WP1550A | WP1550A US | 5100018325 |
| VP2050Aw | VP2050Aw US | 5100029050 |
| VP2050A | VP2050A US | 5100029051 |
| VP2050Aw | VP2050Aw | 5100029052 |
| VP2050A | VP2050A | 5100029053 |
| VP1550Aw | VP1550Aw US | 5100029054 |
| VP1550A | VP1550A US | 5100029055 |
| VP1550Aw | VP1550Aw | 5100029056 |
| VP1550A | VP1550A | 5100029057 |
| VP1340Aw | VP1340Aw US | 5100029058 |
| VP1340A | VP1340A US | 5100029059 |
| VP1340Aw | VP1340Aw | 5100029060 |
| VP1140A | VP1340A | 5100029061 |
| VP1340Aw | VP1340Aw Loxam | 5100029062 |
| vibratory Plate | BPU2540A CN | 5100046522 |
| WPU1550A-US | WPU1550A-US | 5100069716 |
| WPU1550A | WPU1550A | 5100071592 |
| Vibration Plate | WP1550Aw CN | 5100039663 |
| Vibration Plate | VP2050Aw CN | 5100039664 |
| Vibration Plate | VP1340Aw CN | 5100039665 |
| PT2A | PT2A | 5100058524, 5100058525 |
| HPG100A | HPG100A | 5000009507 |
| Modular Internal Vibrators | D3.5A3 | 5100072402 |
| Modular Internal Vibrators | D3.5A2 | 5100072405 |
| BT24A | BT24A | 5100081469 |
| BT36A | BT36A | 5100081470 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
