The Wacker Neuson Intake Valve is a genuine OEM intake valve designed for a broad range of Wacker Neuson vibratory plates, truss screeds, and modular internal vibrators, including the WP1540A, WP1550A, VP1340A, VP1550A, VP2050A, BPU2540A, and HPG series. As a factory-authorized OEM part, it is manufactured to the exact specifications required by the original equipment, ensuring a direct, correct-fit installation with no guesswork. This valve is compatible across a wide spread of both wheeled and standard vibratory plate models — making it a go-to stocking item for fleet operators and service technicians. Verify your model number against the fitment list before ordering to confirm compatibility with your specific machine configuration.
Key Features
- Genuine OEM Valve Geometry — Manufactured to the exact seat angle, stem diameter, and head dimensions specified for Wacker Neuson GV-series engines, ensuring correct sealing and full port flow from the moment it's installed.
- Direct Drop-In Replacement — Matches the original valve dimensions and retainer groove spec, so it seats correctly in the cylinder head without any machining or adaptation work.
- Wide Fitment Coverage — Compatible with WP1540A, WP1550A, VP1340A, VP1550A, VP2050A, BPU2540A, HPG50A, HPG100A, PT2A, BT24A, BT36A, and additional models across the Wacker Neuson vibratory plate and concrete equipment lineup.
- Restores Full Engine Compression — A worn or burnt intake valve causes hard starting, loss of power, and excessive fuel consumption. Replacing it with this OEM part brings compression back to spec and restores engine responsiveness.
- Fuel System Integrity — A properly sealing intake valve prevents unburned mixture blow-back into the intake tract, protecting the carburetor and air filter from contamination and keeping the fuel system operating cleanly.
The intake valve controls the flow of the air-fuel mixture from the carburetor into the engine's combustion chamber. It opens on the intake stroke to allow the charge in, then seals tightly during compression and combustion to maintain cylinder pressure. When an intake valve wears, warps, or loses its seat seal, compression drops, the engine becomes difficult to start, runs roughly, and loses the power needed to drive vibratory plate compaction or concrete vibration equipment effectively. Replacing a failed intake valve promptly prevents further damage to the valve seat and cylinder head.
Part Details
| Part Number | 5100050573 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Intake Valve |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| GV2500A | GV2500A | 5000009345, 5000009350 |
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009545, 5000009472, 5000630045 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043, 5000009486 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630046, 5100018330 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630044, 5100018323 |
| BPU2540A | BPU 2540A | 5000008758 |
| HP50A | HP50A | 5000009508 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HPG50A | HPG50A | 5000009509 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| WP1540Aw | WP1540Aw US | 5100018327 |
| WP1540Aw | WP1540Aw | 5100018329 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| WP1550Aw | WP1550Aw | 5100016241 |
| WP1550Aw | WP1550Aw US | 5100018324 |
| WP1540A | WP1540A US | 5100018328 |
| WPU1550AW-US | WPU1550AW-US | 5100069715 |
| WPU1550Aw | WPU1550AW | 5100071591 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| WP1550A | WP1550A US | 5100018325 |
| VP2050Aw | VP2050Aw US | 5100029050 |
| VP2050A | VP2050A US | 5100029051 |
| VP2050Aw | VP2050Aw | 5100029052 |
| VP2050A | VP2050A | 5100029053 |
| VP1550Aw | VP1550Aw US | 5100029054 |
| VP1550A | VP1550A US | 5100029055 |
| VP1550Aw | VP1550Aw | 5100029056 |
| VP1550A | VP1550A | 5100029057 |
| VP1340Aw | VP1340Aw US | 5100029058 |
| VP1340A | VP1340A US | 5100029059 |
| VP1340Aw | VP1340Aw | 5100029060 |
| VP1140A | VP1340A | 5100029061 |
| VP1340Aw | VP1340Aw Loxam | 5100029062 |
| WPU1550A-US | WPU1550A-US | 5100069716 |
| WPU1550A | WPU1550A | 5100071592 |
| PT2A | PT2A | 5100058524, 5100058525 |
| HPG100A | HPG100A | 5000009507 |
| Modular Internal Vibrators | D3.5A3 | 5100072402 |
| Modular Internal Vibrators | D3.5A2 | 5100072405 |
| BT24A | BT24A | 5100081469 |
| BT36A | BT36A | 5100081470 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
