The Wacker Neuson Carburetor Assembly is a genuine OEM carburetor assembly designed for a wide range of Wacker Neuson vibratory plates, power sections, and modular vibrator units, including the WP1540A, WP1550A, WP1540AW, WP1550AW, VP1340A, VP1550A, VP2050A, BPU2540A, and associated US and wheel-kit variants. As a factory-sourced component, part is manufactured to the exact specifications required by Wacker Neuson equipment, ensuring a direct, no-guesswork replacement for the original unit. This assembly covers an extensive fitment range spanning vibratory plates, truss screeds, power trowels, and internal vibrator drives. Whether you are servicing a single machine or maintaining a fleet, the is the correct OEM solution.
Key Features
- Fuel Circuit Precision — Manufactured to OEM jet sizing and needle tolerances, ensuring correct air-fuel mixture delivery across the full throttle range of the engine.
- Direct Drop-In Replacement — Matches the original mounting pattern, fuel inlet, and throttle linkage connection points for straightforward installation without adaptation.
- Broad Vibratory Equipment Fitment — Compatible with WP1540A, WP1550A, WP1540AW, WP1550AW, VP1340A, VP1550A, VP2050A, BPU2540A series, plus PT2A, HPG50A, HPG100A, and modular internal vibrator platforms.
- Consistent Engine Starting and Throttle Response — A correctly functioning carburetor assembly keeps the engine starting reliably and maintaining stable RPM under compaction load; a worn or blocked unit causes hard starting, rough running, and power loss.
- Fuel System Safety Compliance — Genuine OEM construction uses materials rated for gasoline exposure, reducing the risk of fuel leaks at seals and gasket interfaces that aftermarket units with incorrect material grades can present.
The carburetor assembly is responsible for mixing air and fuel in the correct ratio before delivery to the engine's combustion chamber. On vibratory compaction equipment, where the engine must sustain consistent power output through demanding duty cycles, a properly calibrated carburetor is critical to maintaining compaction force and operational efficiency. When the carburetor wears, becomes clogged, or develops leaks, the engine will typically exhibit hard starting, erratic idling, loss of power under load, or excessive fuel consumption — all of which point to replacement of the assembly rather than cleaning alone.
Part Details
| Part Number | 5100051853 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Assembly |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Plate, 15kN, 400mm/1 5.5in | WP1540AW | 5000008060, 5000009545, 5000009472, 5000630045 |
| Vibratory Plate, 15 kN, 500mm/ 19.5in | WP1550AW | 5000007576, 5000009546, 5000630043, 5000009486 |
| WP1540A VIBROPLATE | WP1540A | 5000008061, 5000630046, 5100018330 |
| WP1550A Single Direction Vibratory Plate | WP1550A | 5000007579, 5000630044, 5100018323 |
| BPU2540A | BPU 2540A | 5000008758 |
| HP50A | HP50A | 5000009508 |
| BPU 2540A US | BPU 2540A US | 5000610360 |
| Vibratory Truss Screed, Power Section | HP100A | 5000009506 |
| HPG50A | HPG50A | 5000009509 |
| VP1550AW/WH | VP1550AW/WH | 5000630373 |
| WP1540Aw | WP1540Aw | 5100018329 |
| VP1340AW/WH | VP1340AW/WH | 5000630374 |
| WP1550Aw | WP1550Aw | 5100016241 |
| WPU1550AW-US | WPU1550AW-US | 5100069715 |
| WPU1550Aw | WPU1550AW | 5100071591 |
| A5000/160 ISO | A5000/160 ISO | 5000610325 |
| A5000/160 ANSI | A5000/160 ANSI | 5000610340 |
| VP2050Aw | VP2050Aw US | 5100029050 |
| VP2050A | VP2050A US | 5100029051 |
| VP2050Aw | VP2050Aw | 5100029052 |
| VP2050A | VP2050A | 5100029053 |
| VP1550Aw | VP1550Aw US | 5100029054 |
| VP1550A | VP1550A US | 5100029055 |
| VP1550Aw | VP1550Aw | 5100029056 |
| VP1550A | VP1550A | 5100029057 |
| VP1340Aw | VP1340Aw US | 5100029058 |
| VP1340A | VP1340A US | 5100029059 |
| VP1340Aw | VP1340Aw | 5100029060 |
| VP1140A | VP1340A | 5100029061 |
| VP1340Aw | VP1340Aw Loxam | 5100029062 |
| WPU1550A-US | WPU1550A-US | 5100069716 |
| WPU1550A | WPU1550A | 5100071592 |
| PT2A | PT2A | 5100058524, 5100058525 |
| HPG100A | HPG100A | 5000009507 |
| Modular Internal Vibrators | D3.5A3 | 5100072402 |
| Modular Internal Vibrators | D3.5A2 | 5100072405 |
| BT24A | BT24A | 5100081469 |
| BT36A | BT36A | 5100081470 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
