The Wacker Neuson Screw Set is a genuine OEM component designed for a broad range of Wacker Neuson walk-behind trowels, centrifugal trash pumps, vibratory plates, and power screed units — including the CT36 and CT48 series trowels, PT3A trash pumps, and BPS 2550A vibratory plates. Sourced directly from Wacker Neuson, this screw set is manufactured to the exact tolerances and material specifications of the original hardware it replaces. Verified fitment spans both standard and CE-compliant variants across the CT36AGP, CT36AGT, CT36AVP, CT36AVT, CT48ADP, CT48ADT, and CT48ADT-E model lines, as well as HPG50A, HPG100A, MPU 29A, and RD7Af HRC equipment.
Key Features
- Exact Thread Specification and Material Grade — Manufactured to OEM thread pitch, head dimensions, and material hardness, ensuring correct torque retention and resistance to loosening under sustained vibration loads.
- Direct Drop-In Replacement — Installs in the same position and orientation as the original hardware with no re-drilling, rethreading, or adaptation needed at the mounting point.
- Wide Confirmed Fitment — Compatible with CT36 and CT48 walk-behind trowels (AGP, AGT, AVP, AVT, ADP, ADT series), PT3A centrifugal trash pumps, BPS 2550A vibratory plates, HPG50A and HPG100A power screed units, MPU 29A reversible plates, and RD7Af HRC rollers.
- Vibration-Resistant Holding Power — Correct fastener spec maintains secure assembly integrity on high-vibration equipment; worn or incorrect screws can allow component shift, accelerated wear, and unplanned disassembly during operation.
- Genuine OEM Part — Supplied as an authorized Wacker Neuson replacement under part number 5100051883, backed by the same quality controls applied to original production hardware.
A screw set provides the fastening hardware used to secure components within an assembly — holding covers, housings, brackets, or internal parts in their designed positions during operation. On high-vibration equipment such as walk-behind trowels and vibratory plates, fasteners are subjected to continuous cyclical stress that can cause substandard or incorrect screws to loosen, strip, or fail prematurely. Using the correct OEM-specified screw set ensures the assembly stays properly torqued and structurally sound, maintaining the performance and safety of the machine throughout its service life.
Part Details
| Part Number | 5100051883 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Screw Set |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 915mm/36in CE Walk-behind Trow el | CT36AGP | 5000007596, 5000007595 |
| 915mm/36in CE Walk-behind Trow el | CT36AGP-E | 5000008036, 5000008026 |
| 1220mm/48in Walk-behind Trowel | CT48ADP | 5000007598, 5000007599, 5000008199 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADP-E | 5000008027, 5000008028 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT-E | 5000007594, 5000008012 |
| 1220mm/48in CE Walk-behind Tro wel | CT48ADT-E | 5000007597, 5000008016 |
| 915mm/36in CE Walk-behind Trow el | CT36AGT | 5000008014, 5000008011 |
| 1220mm/48in Walk-behind Trowel | CT48ADT | 5000008015, 5000008040 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVP | 5000009235, 5000009236 |
| HPG100A | HPG100A | 5000009507 |
| 75mm/3in Centrifugal Trash Pum p | PT3A | 5000006729, 5000006730, 5100058535, 5100058536 |
| 915mm/36in Variable Speed Walk #NAME? | CT36AVT | 5000009233, 5000009234 |
| Single Direction Vibratory Pla te, 25kN, 50cm/20in | BPS 2550A | 5000007528 |
| HPG50A | HPG50A | 5000009509 |
| Reversible Plates | MPU 29A | 5000630244 |
| Vibratory Truss Screed, Power Section | HPG100 | 5000008293 |
| Vibratory Truss Screed, Power Section | HPG50 | 5000008294 |
| RD7Af HRC | RD7Af HRC | 5100006342 |
| RD7Afb HRC | RD7Afb HRC | 5100006347 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
