The Wacker Neuson 5100068444 is a genuine OEM Carburetor Repair Kit HDA355-357 designed for the BS50-2, BS50-2plus, BS60-2, BS60-2plus, BS62-2, BS68-2, and BS70-2 series gasoline vibratory rammers. Sourced directly from Wacker Neuson, this kit includes the manufacturer-specified components needed to restore proper carburetor function to OEM condition. It covers an extensive range of BS-series rammer configurations, including US, CN, Sunbelt, and standard variants across both standard and "plus" models. When carburetor wear or fuel delivery issues are slowing down your compaction work, the 5100068444 delivers the exact parts needed to get your rammer back to full performance.
Key Features
- Genuine OEM Fuel System Integrity — Factory-original components maintain the correct fuel-to-air mixture calibration specific to HDA355-357 series carburetors, preventing rich or lean running conditions.
- Direct HDA355-357 Carburetor Compatibility — Engineered specifically for the HDA355-357 carburetor assembly found across the BS50-2, BS60-2, BS62-2, BS68-2, and BS70-2 rammer families, so components seat and seal correctly on reinstallation.
- Broad BS-Series Rammer Coverage — A single kit services multiple BS50-2, BS60-2, BS62-2, BS68-2, and BS70-2 configurations, including US, CN, Sunbelt, standard, and "plus" variants.
- Restores Consistent Engine Starting and Throttle Response — A worn or damaged carburetor causes hard starting, erratic idling, and loss of compaction power; this kit brings fuel delivery back to spec so the rammer runs cleanly through its full stroke cycle.
- Fuel System Safety Assurance — Using OEM-grade gaskets, needles, and seats from this kit reduces the risk of fuel leaks that can pose a fire hazard on active worksites.
The carburetor on a gasoline vibratory rammer meters the precise blend of fuel and air delivered to the engine for combustion. On BS-series rammers, the HDA355-357 carburetor manages this mixture across idle, mid-range, and full-throttle operation — directly affecting how consistently the machine delivers its compaction blows. Over time, internal components such as the inlet needle, gaskets, and diaphragms degrade from fuel exposure and heat cycling, causing rough running, flooding, or a complete failure to start. Rebuilding the carburetor with a genuine OEM repair kit like the 5100068444 restores these critical tolerances without replacing the entire carburetor body.
Part Details
| Part Number | 5100068444 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor Repair Kit HDA355-357 |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2 10in | BS50-2 10in | 5100058346 |
| BS50-2 11in US | BS50-2 11in US | 5100030590 |
| BS50-2 11in | BS50-2 11in | 5100030591 |
| BS50-2 11in o. bsz | BS50-2 11in o. bsz | 5100068309 |
| BS50-2 6in | BS50-2 6in | 5100030592 |
| BS50-2plus 11in US | BS50-2plus 11in US | 5100030594 |
| BS50-2plus 11in ha US | BS50-2plus 11in ha US | 5100030595 |
| BS50-2plus 11in | BS50-2plus 11in | 5100030596 |
| BS50-2plus 6in (24mm) | BS50-2plus 6in (24mm) | 5100030597 |
| BS60-2 11in | BS60-2 11in | 5100030600, 5100037561, 5100051580 |
| BS60-2plus 11in US | BS60-2plus 11in US | 5100030602 |
| BS60-2plus 11in ha US | BS60-2plus 11in ha US | 5100030603 |
| BS60-2plus 11in | BS60-2plus 11in | 5100030604 |
| BS60-2plus 11in CN | BS60-2plus 11in CN | 5100039660 |
| BS62-2/25 | BS62-2/25 | 5100070151 |
| BS62-2/28 | BS62-2/28 | 5100070149 |
| BS62-2b/28 | BS62-2b/28 | 5100061964 |
| BS62-2lb/16 | BS62-2lb/16 | 5100061965 |
| BS62-2lb/16 Sunbelt | BS62-2lb/16 Sunbelt | 5100070528 |
| BS68-2/28 | BS68-2/28 | 5100070150 |
| BS68-2b/28 | BS68-2b/28 | 5100061969 |
| BS68-2b/28 Sunbelt | BS68-2b/28 Sunbelt | 5100070529 |
| BS70-2 11in | BS70-2 11in | 5100030607 |
| BS70-2plus 11in US | BS70-2plus 11in US | 5100030608 |
| BS70-2plus 11in | BS70-2plus 11in | 5100030609 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
