The Wacker Neuson Carb Adapter Gasket is a genuine OEM component designed for the BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, and BS70-2 and BS70-2i series vibratory rammers. Sourced directly from Wacker Neuson, this gasket delivers the exact material grade and dimensional fit required for a proper carburetor adapter seal on these machines. It cross-references OEM part and covers a wide range of model configurations including standard, high-altitude, low-HAV, and BG Bau Approved variants. Confirm your model number before ordering to ensure a correct match across the full BS rammer lineup.
Key Features
- Fuel-Tight OEM Seal Material — Manufactured to Wacker Neuson's compression and chemical-resistance specifications for the carburetor adapter interface, ensuring a consistent, leak-free seal in fuel system service conditions.
- Drop-In Adapter Fit — Seats directly at the carburetor-to-adapter junction with no trimming or rework required, maintaining correct alignment and clamping surface between components.
- Broad BS Rammer Compatibility — Fits BS50-2, BS50-2i, BS60-2, BS60-2i, BS65-V, BS70-2, and BS70-2i series rammers across standard, high-altitude, BG Bau Approved, and low-HAV configurations.
- Fuel Delivery Integrity — A failed or deteriorated carb adapter gasket allows unmetered air into the fuel circuit, causing rough running, hard starts, and loss of compaction performance. Replacing it restores correct air-fuel ratio and consistent engine response.
- Fuel System Safety — A properly seated gasket eliminates the risk of external fuel seepage at the adapter joint, an important consideration when operating in confined or enclosed work areas.
- Cross-Reference Verified — Listed under OEM cross-reference 5100032173, so you can match against both part numbers when verifying your order against a service manual or parts diagram.
The carb adapter gasket creates an airtight, fuel-resistant seal between the carburetor and its mounting adapter on the rammer's engine. It prevents unintended air from entering the fuel circuit and stops fuel vapors or raw fuel from escaping at the joint. When this gasket hardens, compresses unevenly, or cracks with age, the engine can run lean, idle erratically, or become difficult to start — symptoms that are easily mistaken for carburetor or ignition faults until the sealing surface is inspected.
Part Details
| Part Number | 5200016849 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carb Adapter Gasket |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| BS50-2i Vibratory Rammer, 11" Plastic Shoe | BS50-2i | 5200000642, 5200000643, 5200000657, 5200000658, 5200000659, 5200000660, 5200000661, 5200000678, 5200000687, 5200011099, 5100014907, 5100016648, 5100016649, 5100016650, 5200025428, 5200025429, 5100028037 |
| BS60-2i RAMMER, 11" PLASTIC SHOE | BS60-2i | 5200000645, 5200000646, 5200000664, 5200000665, 5200000682, 5200000689, 5200000690, 5100014908, 5100028038 |
| BS70-2i Vibratory Rammer, 13" Plastic Shoe | BS70-2i | 5200000649, 5200000650, 5200000672, 5200000673, 5100014909, 5100016653 |
| 280/11in Shoe, Vibratory Ramme r | BS50-2 | 5200000677, 5200000652, 5200000653, 5200000655, 5200000656, 5200000685, 5200000686, 5200000641, 5200000654, 5100014171, 5100016644, 5100016645, 5100016646, 5100016647 |
| 2-stroke rammer BS65V, 280 mm shoe | BS65-V | 5200000669, 5100016651 |
| BS 70-2, 330 mm shoe | BS70-2 | 5200000671, 5200000670, 5200000684, 5100014905, 5100016652, 5200000676 |
| 280/11in Shoe, Vibratory Ramme r | BS60-2 | 5200000681, 5200000688, 5200000666 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
