The Wacker Neuson Driver 320 RX LED is a genuine OEM component designed for the LTN6L, LTN6C, LTN6K, LTN8K, LTN6LE, LTW6K, LTW8K, and LTW20Z series light towers. Sourced directly from Wacker Neuson, this driver delivers the correct electrical output and signal compatibility required to keep your LED light heads performing at full capacity. It fits an extensive range of custom Tier 4F, Tier 4i, 50 Hz, and 60 Hz light tower configurations, covering both the LTN and LTW families. When an LED driver fails, light output drops or stops entirely — replacing it with the genuine OEM part restores proper illumination and keeps your worksite lit safely.
Key Features
- Correct Output Specification — Genuine OEM driver matched to the electrical load and signaling requirements of Wacker Neuson LED light head assemblies, ensuring consistent, full-intensity output.
- Direct Drop-In Replacement — Engineered to the original connector and mounting configuration, allowing straightforward installation without modification to the existing wiring harness.
- Broad Light Tower Compatibility — Fits LTN6L, LTN6C, LTN6K, LTN8K, LTN6LE, LTW6K, LTW8K, and LTW20Z series machines across Tier 4F, Tier 4i, 50 Hz, and 60 Hz variants.
- Protects LED Head Longevity — A correctly functioning driver regulates current precisely; an out-of-spec or failed driver can over-drive LED arrays, shortening their service life significantly.
- Electrical Safety Compliance — As a genuine OEM part, this driver meets the original design tolerances for voltage and current regulation, supporting safe operation on both CE and non-CE configured machines.
- Verified OEM Part Number — Listed under Wacker Neuson part number 5200022352, cross-referenced across the full LTN and LTW model range for confident ordering.
An LED driver is the power-conditioning component that takes incoming voltage from the machine's electrical system and converts it into the precise, regulated current that LED light heads require to operate. Without a functioning driver, LEDs will either fail to illuminate, flicker, or burn out prematurely due to unregulated current. On a light tower, where dependable, high-output illumination is critical to worksite safety and productivity, a failed driver can bring an entire light head offline — making timely replacement with the correct OEM part essential.
Part Details
| Part Number | 5200022352 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Driver 320 RX LED |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| LTN6L LIGHT TOWER, CUSTOM, Tier 4F | LTN6L | 5000620553 |
| LTN6L 50 Hz Non CE. Custom | LTC6L | 5000620559 |
| LTN8K LIGHT TOWER, CUSTOM, Tier 4F | LTN8K | 5000620939 |
| LTN6K LIGHT TOWER, CUSTOM, Tier 4F | LTN6K-LT | 5000620938 |
| LTN6C LIGHT TOWER, CUSTOM, Tier 4F | LTN6C | 5000620555 |
| LTN6L-V LIGHT TOWER,50HZ CUSTOM | LTN6L-V | 5200002721 |
| LTN6K-V LIGHT TOWER,60HZ CUSTOM | LTN6K-V | 5200002726 |
| LTN8K-V LIGHT TOWER,60HZ CUSTOM | LTN8K-V | 5200002728 |
| LTW20Z1-V S LIGHT TOWER,CUSTOM, TIER 4i | LTW20Z1-V S | 5200018561 |
| LTW20Z3-V S LIGHT TOWER,CUSTOM, TIER 4i | LTW20Z3-V S | 5200018562 |
| Light Tower | LTW6K-V | 5200012868 |
| Light Tower | LTW8K-V | 5200012869 |
| LTW6K-V S Light Tower, Custom T4 | LTW6K-V S | 5200018559 |
| LTW8K-V S Light Tower, Custom T4 | LTW8K-V S | 5200018560 |
| LTN6L-V S LIGHT TOWER, CUSTOM, Tier 4F | LTN6L-V S | 5200018539, 5200018576 |
| LTN6K-V S LIGHT TOWER, CUSTOM, Tier 4F | LTN6K-V S | 5200018550 |
| LTN8K-V S LIGHT TOWER, CUSTOM, Tier 4F | LTN8K-V S | 5200018551 |
| LTN6LE-V 50 Hz CE 230 V LED | LTN6LE-V | 5200019285, 5200019140 |
| LTN6L 50 Hz CE- RACKED | LTN6LE | 5200019142, 5200019143, 5200019141 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
