The Wacker Neuson Seal is a genuine OEM seal designed for the RD18-80, RD18-100, RD40-130, and RD45-140 series tandem rollers, including C, O, DPF, and US variants across multiple production runs. As a factory-sourced component, this seal is manufactured to the same standards as the original part installed on the production line, ensuring a correct, consistent fit without guesswork. Fitment extends across a broad range of RD18, RD40, and RD45 configurations, making part number a widely applicable service item for operators running Wacker Neuson compaction equipment. Always verify your machine model and serial number before ordering to confirm compatibility with your specific unit.
Key Features
- OEM-Grade Sealing Material — Manufactured to the original material and compression specification, ensuring consistent sealing integrity under the operating pressures and temperatures typical of tandem roller hydraulic and drivetrain systems.
- Direct OEM Replacement — Matches the original part geometry and seating dimensions exactly, dropping into the same bore or housing as the factory-installed seal with no trimming or adaptation.
- Broad RD Series Fitment — Compatible with RD18-80, RD18-100, RD40-130, and RD45-140 tandem rollers across standard, C, O, DPF, SE, and US configurations, spanning multiple generation codes.
- Prevents Fluid Loss and Contamination — A correctly seated seal keeps hydraulic fluid, gear oil, or lubricant contained within its circuit. A worn or failed seal allows fluid to escape and allows contaminants to enter, accelerating wear on surrounding components.
- Genuine Wacker Neuson Part — Sourced directly from Wacker Neuson, part number 5100011622 carries full OEM traceability and is the same component supplied through authorized dealer service channels.
A seal serves as the barrier between moving or pressurized components and the surrounding environment, preventing the escape of fluids and keeping dirt, moisture, and debris out of critical assemblies. On tandem rollers like the RD18 and RD40-45 series, seals are used throughout the hydraulic system, drum drive housings, and bearing carriers — areas that are exposed to constant vibration, load cycling, and harsh ground-level conditions. When a seal degrades or fails, fluid leaks can lead to pressure loss, overheating, and accelerated wear on adjacent components, turning a low-cost service item into a much more significant repair if left unaddressed.
Part Details
| Part Number | 5100011622 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Seal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| RD18-80 Tandem Roller | RD18-80 | 5100011382, 5100047360, 5100055774 |
| RD18-100 Tandem Roller | RD18-100 | 5100011383, 5100047361, 5100055775 |
| RD18-100 C Tandem Roller | RD18-100 C | 5100011384 |
| RD40-130 Tandem Roller | RD40-130 | 5100011391, 5100047382 |
| RD45-140 Tandem Roller | RD45-140 | 5100011392, 5100047383 |
| RD40-130 C Tandem Roller | RD40-130 C | 5100011393 |
| RD45-140 C Tandem Roller | RD45-140 C | 5100011394 |
| RD40-130 O | RD40-130 O | 5100011395 |
| RD45-140 O Tandem Roller | RD45-140 O | 5100011396 |
| RD40-130 Tandem Roller | RD40-130 US | 5100021801 |
| RD45-140 Tandem Roller | RD45-140 US | 5100021802 |
| RD40-130 C Tandem Roller | RD40-130C US | 5100021803 |
| RD45-140 C Tandem Roller | RD45-140C US | 5100021804 |
| RD40-130 O Tandem Roller | RD40-130O US | 5100021805 |
| RD45-140 O Tandem Roller | RD45-140O US | 5100021806 |
| RD18-80 Tandem Roller | RD18-80 US | 5100027572 |
| RD18-100 Tandem Roller | RD18-100 US | 5100027573 |
| RD18-100 C Tandem Roller | RD18-100 C US | 5100027574 |
| Vibration Roller | RD18-80 SE | 5100044988 |
| Vibration Roller | RD18-100 SE | 5100044989 |
| RD 18-100 C | RD18-100c | 5100047362, 5100055776 |
| Vibration Roller | RD18-100c 3 | 5100047363 |
| RD40-130c | RD40-130c | 5100047384 |
| RD45-140c | RD45-140c | 5100047385 |
| RD40-130o | RD40-130o | 5100047386 |
| RD45-140o | RD45-140o | 5100047387 |
| RD40-130.3 | RD40-130.3 | 5100047395 |
| RD45-140.3 | RD45-140.3 | 5100047396 |
| RD40-130c.3 | RD40-130c.3 | 5100047397 |
| RD45-140c.3 | RD45-140c.3 | 5100047398 |
| RD40-130o.3 | RD40-130o.3 | 5100047399 |
| RD45-140o.3 | RD45-140o.3 | 5100047400 |
| RD40-130 DPF | RD40-130 DPF | 5100055777 |
| RD45-140 DPF | RD45-140 DPF | 5100055778 |
| RD40-130c DPF | RD40-130c DPF | 5100055779 |
| RD45-140c DPF | RD45-140c DPF | 5100055780 |
| RD40-130o DPF | RD40-130o DPF | 5100055781 |
| RD45-140o DPF | RD45-140o DPF | 5100055782 |
| RD18-80.3 | RD18-80.3 | 5100055946 |
| RD18 | RD18-100.3 | 5100055947 |
| RD18-100c.3 | RD18-100c.3 | 5100055948 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
