The Wacker Neuson Fuel Tank is a genuine OEM fuel tank designed for VP1135A, VP1135AW, WP1235A, BPS1030A, BPS1135A, and BPS1340A series single direction vibratory plates. Sourced directly from Wacker Neuson, this is the same tank that ships on the machine from the factory, ensuring a correct, trouble-free installation with no guesswork. It fits an extensive range of models across both US and EU configurations, including the BPS1030Aw, BPS1135Aw, and BPS1340Aw variants. When your current tank is cracked, leaking, or damaged, swapping in part number restores full fuel capacity and gets your compaction equipment back to work.
Key Features
- Genuine OEM Fuel Integrity — Manufactured to Wacker Neuson's original material and dimensional specifications, so the tank seals correctly and holds the rated fuel volume without flex or seepage under field conditions.
- Drop-In Replacement — Mounting points, inlet, outlet, and vent positions match the original exactly, allowing a direct swap without cutting, drilling, or adapting fittings.
- Broad Model Coverage — A single part number covers the VP1135A, VP1135AW, WP1235A, BPS1030A/Aw, BPS1135A/Aw, and BPS1340A/Aw vibratory plate families in US, EU, and CN configurations.
- Consistent Fuel Delivery — A correctly sealed, undamaged tank maintains steady fuel flow to the engine, preventing lean-run conditions, stalling, and uneven compaction performance on site.
- Fuel System Safety — A cracked or leaking tank creates a fire and spill hazard on active worksites; replacing it with a genuine OEM unit eliminates that risk and keeps your equipment operating within safe parameters.
The fuel tank stores and supplies the gasoline needed to run the engine that powers the vibratory plate's compaction mechanism. It acts as the primary fuel reservoir, feeding the carburetor or fuel system at a controlled rate to keep the engine running smoothly under continuous load. When a fuel tank cracks, warps, or develops a leak, the engine is starved of fuel or begins drawing air into the fuel line, causing hard starts, rough idling, and eventual shutdown — halting compaction work until the tank is replaced.
Part Details
| Part Number | 5000406692 |
|---|---|
| Old Part Number | 0406692 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Fuel Tank |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| VP1135AW VIBROPLATE | VP1135AW | 5000009058, 5000630060 |
| VP1135A VIBROPLATE | VP1135A | 5000009057, 5000630059, 5100029066 |
| Single direction vibratory plate WP1235A | WP1235A | 5000630016 |
| Single Direction Plates | AP1135A | 5000009519 |
| Single Direction Plates | WP1235Aw | 5000630103 |
| Single Direction Plates | WP1235Aw-L | 5000630104, 5000630105 |
| Single Direction Plates | WP1235Aw-LL | 5000630122 |
| BPS1340Aws | BPS1340Aws | 5100060129, 5100067726 |
| VP1135A | VP1135A US | 5100029064, 5100018351 |
| BPS1030Aw | BPS1030Aw | 5100058916 |
| BPS1135Aw | BPS1135Aw | 5100059657 |
| BPS1030A | BPS1030A | 5100059658 |
| BPS1340Aw | BPS1340Aw | 5100059659 |
| BPS1135A | BPS1135A | 5100059662 |
| BPS1340A | BPS1340A | 5100059906 |
| VP1135AWSingle Direction Vibratory Plate | VP1135Aw US | 5100018350, 5100029063 |
| VP1135Aw | VP1135Aw | 5100029065 |
| Vibration Plate | VP1135Aw CN | 5100039666 |
| Vibratory Plate BPS1030Aw US | BPS1030Aw US | 5100080503 |
| Vibratory Plate BPS1030A US | BPS1030A US | 5100080504 |
| BPS1135Aw | BPS1135Aw US | 5100080505 |
| BPS1135A | BPS1135A US | 5100080506 |
| BPS1340Aw | BPS1340Aw US | 5100080507 |
| BPS1340A | BPS1340A US | 5100080508 |
| Vibratory Plate BPS1030Aw EU | BPS1030Aw EU | 5100084343 |
| Vibratory Plate BPS1030A EU | BPS1030A EU | 5100084344 |
| Vibratory Plate BPS1135Aw EU | BPS1135Aw EU | 5100084347 |
| Vibratory Plate BPS1135A EU | BPS1135A EU | 5100084348 |
| Vibratory Plate BPS1340Aw EU | BPS1340Aw EU | 5100084349 |
| Vibratory Plate BPS1340A EU | BPS1340A EU | 5100084350 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
