The Wacker Neuson Pin Terminal is a genuine OEM component designed for the RT82-SC2, RT56-SC2, RT82-SC, RT56-SC, RTLx-SC3, RTKx-SC3, RTL82-SC3, and RTx-SC2 series vibratory trench rollers. As a direct OEM part, the is manufactured to the exact specification required by Wacker Neuson, ensuring the terminal seats and locks correctly within the machine's wiring harness connectors. This part covers an extensive range of SC2 and SC3 series trench roller configurations, including smooth drum, Compatec-equipped, and EU variants. Keep a spare on hand to avoid unnecessary electrical downtime on the job.
Key Features
- Correct Crimp and Contact Geometry — Manufactured to OEM dimensional spec so the terminal delivers a consistent, low-resistance electrical connection without reworking the connector housing.
- Genuine Wacker Neuson OEM Part — Sourced directly from Wacker Neuson, part number 5100037420 carries the same material and contact rating as the terminal installed at the factory.
- Broad SC2 and SC3 Series Coverage — Fits RT82-SC2, RT56-SC2, RT82-SC, RT56-SC, RTLx-SC3, RTKx-SC3, RTL82-SC3, RTx-SC2, and HTC15 trench rollers across multiple build configurations.
- Protects Electrical Circuit Integrity — A properly seated pin terminal maintains stable signal and power flow to roller control systems; a worn or corroded terminal can cause intermittent faults or full circuit failure.
- Electrical Safety Compliance — Using the correct OEM-rated terminal in control and sensor circuits helps prevent unintended voltage drops or arcing that could compromise machine control system reliability.
A pin terminal is a small but critical electrical connector component used to terminate individual wires within a multi-pin connector housing. It grips and retains the wire conductor on one end while forming a secure, low-resistance contact point on the other end, allowing electrical signals or power to pass reliably between circuits. When a pin terminal becomes corroded, bent, or pulls back from the connector housing, it can cause intermittent sensor faults, erratic machine behavior, or a complete loss of the affected circuit — making prompt replacement essential for keeping roller controls operating correctly.
Part Details
| Part Number | 5100037420 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Pin Terminal |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| Vibratory Trench Roller | RT82-SC2 | 5000620530, 5000620293, 5000620367, 5000620525, 5000620528, 5000620529, 5000620526, 5000620527 |
| Vibratory Trench Roller | RT82-SC2 EU | 5000620845, 5200003107 |
| Vibratory Trench Roller | RT56-SC2 | 5000620294, 5000620368 |
| Vibratory Trench Roller | RT56-SC2 EU | 5000620844 |
| Vibratory Trench Roller | RT82-SC | 5000009025, 5000620365, 5000620324, 5000620353, 5000620480, 5000620481, 5000620482 |
| Vibratory Trench Roller | RT56-SC | 5000009026, 5000620366 |
| RTLx-SC3 TRENCH ROLLER,GRN | RTLx-SC3 | 5200019251, 5200019250, 5200019254, 5200019252, 5100018515, 5100018516, 5200019253, 5100038346, 5100045091, 5100052332, 5100052269 |
| RTL82-SC3 ROLLER,SMOOTH DRUM | RTL82-SC3 | 5200019234, 5200019238, 5200019232, 5200019233, 5200019235, 5200019236, 5200019237, 5200019239, 5200022541 |
| RTKx-SC3 Trench Roller | RTK82-SC3 | 5200019257, 5200019256, 5200019255 |
| RTKx-SC3 TRENCH ROLLER,GRN | RTKx-SC3 | 5200019258, 5200019259, 5100018517, 5100018518, 5100034371, 5100037397, 5100039613, 5100052333, 5100052334, 5100052335, 5100052336, 5100052337 |
| Trench Roller | RTx-SC2 EU | 5100028378, 5200008540, 5100052330 |
| RTx-SC2 TRENCH ROLLER | RTx-SC2 | 5200008538, 5200008539, 5200018044, 5200018329 |
| Trench Roller | HTC15 | 5100065571 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
