Wacker Neuson

Wacker Neuson 5000167806 Fender Washer

$1.25
(No reviews yet) Write a Review
SKU:
5000167806-Wacker Neuson
Adding... The item has been added

The Wacker Neuson is a genuine OEM Fender Washer designed for a broad range of Wacker Neuson climate, lighting, and heating equipment — including E3000 and E1100 ground heaters, HSH350 hydronic surface heaters, LTN6 and LTN8 light towers, HI series indirect-fired air heaters, Pureheat hydronic heaters, and the HP252. As a factory-sourced OEM component, part meets the exact material and dimensional specifications set by Wacker Neuson, ensuring a correct fit across every compatible model. The wide-bearing surface of a fender washer is critical for distributing clamping load across panels and brackets — using the correct OEM part helps protect the surrounding material and maintains the integrity of the fastened joint. Keep a few on hand if you service multiple units across this extensive machine lineup.

Key Features

  • Genuine OEM Material Spec — Sourced directly from Wacker Neuson, this fender washer meets the exact thickness and outer-diameter spec required for secure load distribution across panels and mounting surfaces.
  • Wide Load-Bearing Surface — The oversized outer diameter spreads clamping force over a larger contact area, preventing pull-through and surface damage on sheet metal and polymer housings.
  • Drop-In Hardware Replacement — Matches the original fastener stack exactly, so it seats against its mating bolt or screw without shimming or modification.
  • Broad Cross-Family Fitment — A single part number covers E3000, E1100, E5000 ground heaters, HSH350 hydronic surface heaters, LTN6C, LTN6L, LTN6K, LTN8K light tower families, HI750, HI900, HI260 indirect-fired air heaters, Pureheat, Arctic Bear HD, and CUB300HD units.
  • Protects Surrounding Structure — Worn or missing fender washers allow fasteners to pull through or rock, leading to loosened assemblies, vibration damage, and accelerated wear on nearby components.

A fender washer is a flat fastener hardware component distinguished by its large outer diameter relative to its center hole. It is used wherever a standard washer would not provide enough bearing surface to safely distribute the clamping load of a bolt or screw — particularly on thin panels, enclosures, brackets, and access covers. When a fender washer is missing, undersized, or corroded, the fastener can work loose under vibration, tear through the mounting surface, or fail to hold assemblies in alignment, which can compromise panel integrity and lead to further mechanical issues over time.

Part Details

Part Number5000167806
Old Part Number0167806
BrandWacker Neuson
Part TypeGenuine OEM
DescriptionFender Washer

Compatibility & Fitment

Name Model Machine Number
E3000 Hydronic Surface Heater with generator E3000 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5200004952, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5200014721, 5100017810, 5100017811, 5100025046, 5100055568, 5100056441, 5100056440, 5100025045
Hydronic Surface Heater HSH350 5000620254, 5200001677
HP252 HP252 5000620249
E5000 Ground Heater, 12kw Gen, Diesel E5000 5000620899
LTN6C, CATERPILLAR LTN6C 5000620118, 5000620551, 5000620728, 5000620555, 5200004091, 5200022157
LTN6C-P LIGHT TOWER,60 HZ LTN6C-P 5000620298
LTN6L, KOHLER (LOMBARDINI) LTN6L 5000620117, 5000620121, 5000620727, 5000620550, 5000620552, 5000620553, 5200004090, 5200004768, 5200012438, 5200022990, 5200017094, 5200017095, 5200022155
LTN6L-P LIGHT TOWER,60 HZ LTN6L-P 5000620297
LTN6K Light Tower LTN6K 5000620734, 5200022156, 5200022147
LTN8K, KUBOTA LTN8K 5000620893, 5000620939
Pureheat Hydronic Heater, Oil Burner Pureheat 5000620245, 5000620246, 5000620190, 5000620220
E1100 GROUND HEATER E1100 5000620172, 5000620244, 5200001676
LTN6L 50 Hz Non CE. Custom LTC6L 5000620559
LTN6K LIGHT TOWER, CUSTOM, Tier 4F LTN6K-LT 5000620938, 5200004092, 5200004769
LTN6K-V S, KUBOTA, 120/240V LTN6K-V S 5200018537, 5200018550, 5200018553, 5200023197
LTN8K-V LIGHT TOWER,60HZ LTN8K-V 5200002727, 5200002728
LTN6L-V LIGHT TOWER,50HZ LTN6L-V 5200002720, 5200002721
LTN6K-V LIGHT TOWER,60HZ LTN6K-V 5200002722, 5200002726
LTN8K LIGHT TOWER, COLD WEATHER, Tier 4F LTN8K-LT 5200004093
Mobile Drying System MC5200 5000620201, 5000620232
HI750 DGM HEATER-INDIRECT HI750GM 5000620859, 5000620930
LTN6L-V S, KOHLER (LOMBARDINI) LTN6L-V S 5200018536, 5200018539, 5200018573, 5200018552, 5200023687, 5200023688, 5200023689, 5200018576
Mobile Indirect Fired Air Heat er, Diesel HI750D 5000620856, 5000620923, 5000620924
HI 750GM HD-Mobile Indirect Ai r Heater-Surge, -40 HI750GMHD 5000620969
LTN8K-V S, KUBOTA, 120/240V LTN8K-V S 5200018538, 5200018551, 5200018554, 5200023198
HI750G HEATER-INDIRECT HI750G 5000620857
Factory-Installed Options Factory-Installed Options 5200004152
Indirect Mobile Air Heater, Na tural Gas Arctic Bear HD 5000620199, 5000620197
LTN6L 50 Hz CE- RACKED LTN6LE 5200019142, 5200019143
Portable-Indirect Fired Air He ater-Heavy Duty w/LB CUB300HD 5000620253
HI900 Heater-DGM,Srg,-40 HI900DGM 5200014221, 5200014222, 5200014165, 5200014166
HI 900D Heater-Indirect HI900D 5200014158, 5200014159, 5200014160
HI260 HEATER,OIL WITH TANK HI260 5200018503

Verify Before You Order

Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.

Why Buy From DHS Equipment

Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.

Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.