The Wacker Neuson Wire is a genuine OEM Wire designed for the E3000 Ground Heater, E3000 Hydronic Surface Heater, E1250 Hydronic Heater, and HSH380 Hydronic Surface Heater series. As a direct OEM component, it is manufactured to the exact specifications required for correct electrical function within these hydronic heating systems. Fitment covers a wide range of E3000 configurations — including liftbail, generator-equipped, and temperature-control variants — as well as the E1250B, E1250S, and E1250P models and the HSH380B and HSH380S units running on Natural Gas or Propane.
Key Features
- Correct Gauge and Termination: — Manufactured to OEM electrical specifications so it carries the proper current load for hydronic heater control circuits without risk of voltage drop or overheating.
- Genuine OEM Sourcing: — Supplied directly through the Wacker Neuson parts chain, ensuring this wire matches the original connector type, insulation rating, and length used on the production line.
- Broad E3000 Coverage: — Fits standard, liftbail, generator-equipped, and temperature-control variants across the E3000 Ground Heater and E3000 Hydronic Surface Heater families.
- E1250 and HSH380 Compatibility: — Also fits E1250B, E1250S, and E1250P Hydronic Heaters and the HSH380B and HSH380S series on Natural Gas and Propane.
- Sustained Heater Operation: — A correctly functioning wire maintains uninterrupted signal and power flow within the heating system; a damaged or corroded wire can cause intermittent shutdowns or complete heater failure on the job.
- Electrical Safety Compliance: — Using the correct OEM wire in a fuel-burning hydronic heater system ensures the electrical circuit meets the design intent of the heater's safety and control architecture.
In a hydronic surface heater or ground heater, wiring carries control signals and electrical power between the heater's ignition system, control board, pump motor, and safety switches. A wire that is the wrong gauge, wrong length, or improperly terminated can introduce resistance into the circuit, causing erratic heater behavior, nuisance shutdowns, or failure to ignite. Replacing a worn or damaged wire with the correct OEM part restores the integrity of the electrical circuit and ensures all safety and operational controls function as intended.
Part Details
| Part Number | 5000172707 |
|---|---|
| Old Part Number | 0172707 |
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Wire |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| E3000 Hydronic Surface Heater with generator | E3000 | 5000620219, 5000620679, 5000620158, 5000620678, 5200014677, 5100017807, 5100017809, 5200014678, 5200014679, 5200014720, 5100017806, 5100017808, 5100025046, 5100025045 |
| Skid Mounted-Indirect Fired Ai r Heater, NG/LP | CUB400 | 5000620206 |
| E 1250S Hydronic Heater, Standard, LP/NG | E1250S | 5200012354 |
| E 1250P Hydronic Heater, Premium, LP/NG | E1250P | 5200012356 |
| E 1250B Hydronic Heater, Basic, LP/NG | E1250B | 5200007613 |
| HSH 380S-Natural Gas/Propane, w/Generator | HSH380S | 5200012370 |
| HSH 380B-Natural Gas/Propane, w/o Generator | HSH380B | 5200007614 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
