The Wacker Neuson 175334 Carburetor is a genuine OEM component designed for the BS60-2i, BS70-2, and BS70-2i series gasoline vibratory rammers. As a direct OEM replacement, part 175334 is manufactured to the same specification as the original unit installed at the factory, ensuring correct fuel-to-air mixture delivery and proper engine response across all operating conditions. This carburetor is compatible with a wide range of BS-series rammer configurations, including standard, oil-injected, EU-spec, and high-altitude variants with both 280mm/11in and 330mm/13in shoe sizes. When you need a dependable fix for a fuel delivery problem on your Wacker Neuson rammer, the 175334 is the correct part to restore it to full working order.
Key Features
- OEM Fuel Metering Accuracy — Calibrated to the original specification for the BS-series engine, delivering the correct air-fuel ratio for consistent throttle response and reliable cold starts.
- Direct Bolt-On Replacement — Matches the original mounting configuration and fuel inlet connections on BS60-2i and BS70-2/BS70-2i rammers, so installation follows the same procedure as the factory unit.
- Broad BS-Series Compatibility — Fits a wide range of BS60-2i and BS70-2i configurations, including standard, oil-injected, EU-spec, and both 280mm and 330mm shoe variants.
- Restores Full Engine Power — A worn or gummed carburetor causes rough idling, hard starting, and loss of compaction force; replacing it with part 175334 brings engine output back to spec.
- Fuel System Integrity — Using the correct OEM carburetor on a rammer's two-stroke engine is critical to preventing lean-run conditions that can cause accelerated engine wear or seizure.
The carburetor is responsible for mixing fuel and air in the correct ratio before the mixture enters the engine's combustion chamber. On a vibratory rammer like the Wacker Neuson BS60-2i and BS70-2i, precise fuel metering is essential — too lean a mixture causes overheating and power loss, while too rich a mixture leads to fouled plugs, rough running, and wasted fuel. When a carburetor wears out or becomes clogged with varnish deposits, the engine loses its ability to idle smoothly, start reliably, or deliver consistent impact energy to the shoe, directly reducing compaction effectiveness on the job.
Part Details
| Part Number | 175334 |
|---|---|
| Brand | Wacker Neuson |
| Part Type | Genuine OEM |
| Description | Carburetor |
Compatibility & Fitment
| Name | Model | Machine Number |
|---|---|---|
| 280mm/11in Shoe, Oil-injected High Alt. Rammer | BS60-2i | 5000009393, 5000620614 |
| Vibratory Rammer with 280mm/11 in Shoe | BS70-2 EU | 5000009424, 5000009425, 5000009427 |
| 280mm/11in Shoe, Oil-injected Rammer | BS70-2i | 5000009401, 5000009341 |
| Oil-injected Rammer with 280mm /11in | BS70-2i EU | 5000009428, 5000009426 |
| Oil-injected Rammer with 280mm /11in Shoe | BS60-2i EU | 5000009420 |
| Vibratory Rammer with 280mm/11 in Shoe | BS60-2 EU | 5000009418 |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
