The Genie 12906GT is a genuine OEM Fender Washer,.25 X 1.25 X.062, engineered for a wide range of Genie aerial lifts, telehandlers, and personnel lifts. As a genuine OEM component, this washer is manufactured to the exact material and dimensional specifications called out in Genie's parts documentation, ensuring it seats and performs exactly as intended. This washer fits an extensive range of equipment including GS scissor lifts, S and SX telescopic boom lifts, Z and ZX articulating boom lifts, GTH telehandlers, and vertical mast and personnel lift lines such as the AWP, IWP, GR, QS, and DPL series. Cross-reference part number 12906GT against your machine's parts manual to confirm fitment before ordering.
Key Features
- Genuine OEM Material Integrity — Manufactured to Genie's specified thickness and outer diameter (.25 X 1.25 X .062), so load distribution and clamping force remain consistent with the original design.
- Drop-In Replacement — Matches the original hole diameter, washer diameter, and thickness exactly, so this washer installs without rework or shimming on supported models.
- Broad Fleet Compatibility — Fits Genie GS scissor lifts, S and SX telescopic booms, Z and ZX articulating booms, GTH telehandlers, and AWP, IWP, GR, QS, and DPL personnel and vertical mast lifts, making it a practical part to keep in stock across a mixed fleet.
- Even Load Distribution — The oversized bearing surface spreads clamping force across a wider area than a standard washer, protecting softer substrates and fastener seats from deformation over repeated use.
- Structural Connection Reliability — On aerial work platforms, fastener hardware that maintains correct torque and seating directly supports the structural integrity of critical connections — using the correctly specified washer matters.
A fender washer serves a straightforward but important purpose: its larger-than-standard outer diameter distributes the load of a bolt or screw head across a greater surface area, preventing the fastener from pulling through or damaging the material it secures. On Genie equipment, fender washers are used throughout the machine in structural panels, guard mounting, and hardware assemblies where a wide bearing surface is needed. When a washer is worn, deformed, or substituted with an incorrect size, the fastener joint can loosen prematurely or cause damage to the surrounding material, compromising the reliability of that connection over time.
Part Details
| Part Number | 12906GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Fender Washer, .25 X 1.25 X .062 |
Compatibility & Fitment
| Name | Model |
|---|---|
| AWP Super Series | AWP Super Series |
| QS-12R | QS-12R |
| QS-15R | QS-15R |
| QS-20R | QS-20R |
| QS-12W | QS-12W |
| QS-15W | QS-15W |
| QS-20W | QS-20W |
| IWP Super Series | IWP Super Series |
| GR-12 | GR-12 |
| GR-15 | GR-15 |
| GR-20 | GR-20 |
| AWP Super | AWP Super |
| CWP Super Series | CWP Super Series |
| DPL-25S | DPL-25S |
| DPL-30S | DPL-30S |
| DPL-35S | DPL-35S |
| GR-8 | GR-8 |
| PLC PLI | PLC PLI |
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| S-40 | S-40 |
| S-45 | S-45 |
| S-120 | S-120 |
| S-125 | S-125 |
| S-100 | S-100 |
| S-105 | S-105 |
| SX-180 | SX-180 |
| GS-2032 | GS-2032 |
| GS-2632 | GS-2632 |
| GS-2046 | GS-2046 |
| GS-2646 | GS-2646 |
| GS-3246 | GS-3246 |
| GS-2668 RT | GS-2668 RT |
| GS-3268 RT | GS-3268 RT |
| GS-2668 DC | GS-2668 DC |
| GS-3268 DC | GS-3268 DC |
| GTH-1048 | GTH-1048 |
| GTH-1056 | GTH-1056 |
| GTH-844 | GTH-844 |
| TZ-34/20 | TZ-34/20 |
| TZ-50 | TZ-50 |
| TMZ-50/30 | TMZ-50/30 |
| TMZ-17/10 | TMZ-17/10 |
| Z-60/34 | Z-60/34 |
| Z-34/22 N | Z-34/22 N |
| Z-34/22 DC | Z-34/22 DC |
| Z-34/22 Bi-Energy | Z-34/22 Bi-Energy |
| Z-135/70 | Z-135/70 |
| Z-51/30J | Z-51/30J |
| Z-45/25 | Z-45/25 |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-80/60 | Z-80/60 |
| Z-45/25 IC | Z-45/25 IC |
| Z-45/25J IC | Z-45/25J IC |
| ZX-135/70 | ZX-135/70 |
| Z-30/20 N | Z-30/20 N |
| Z-34/22 IC | Z-34/22 IC |
| Z-45/22 | Z-45/22 |
| Z-34 IC | Z-34 IC |
| Z-30/20N RJ | Z-30/20N RJ |
| Z-30/20HD | Z-30/20HD |
| Z-45/22 MP | Z-45/22 MP |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
