The Genie 1253185GT is a genuine OEM Flat Washer, #10, USS, ZAG designed for a wide range of Genie telescopic and articulating boom lifts, scissor lifts, and telehandlers. As a factory-sourced component, this washer matches the original specification for direct installation without alteration. It fits across the S and SX telescopic boom families, Z and ZX articulating boom lines, GS large-format scissor lifts, and GTH telehandlers — making it one of the most broadly applicable hardware items in the Genie platform. Cross-reference part number 1253185GT against your machine's parts manual to confirm correct application before ordering.
Key Features
- Genuine OEM Hardware Grade — Sourced directly from Genie, this washer meets the original zinc-coated USS flat washer specification, ensuring correct load distribution and corrosion resistance for the application.
- Drop-In Installation — Sized and punched to match original hardware configurations, this washer seats against fastener heads and mating surfaces exactly as the factory intended.
- Exceptionally Wide Fitment — Fits Genie S and SX telescopic booms, Z and ZX articulating booms, GS large-format scissor lifts, and GTH telehandlers — a single part number covering a broad fleet.
- Corrosion-Resistant Zinc Finish — The ZAG (zinc-alloy coated) surface treatment protects the washer in outdoor and mixed-environment service conditions typical of aerial lift operation.
- Structural Load Distribution — Flat washers at this scale prevent fastener pull-through and protect mating surfaces under torque, maintaining joint clamping force over the service life of the assembly.
A flat washer distributes the clamping load of a bolt or nut across a wider surface area, preventing the fastener from embedding into or damaging the material it secures. In aerial lifts and telehandlers, where structural joints and mechanical assemblies are subject to vibration, dynamic loads, and repeated service cycles, properly rated washers are essential to maintaining joint integrity. A missing, undersized, or corroded washer can allow fastener movement, accelerate wear on surrounding components, and compromise the clamping preload that keeps critical assemblies secure.
Part Details
| Part Number | 1253185GT |
|---|---|
| Brand | Genie |
| Part Type | Genuine OEM |
| Description | Flat Washer, #10, USS, ZAG |
Compatibility & Fitment
| Name | Model |
|---|---|
| S-80X | S-80X |
| S-80 | S-80 |
| S-85 | S-85 |
| S-60 | S-60 |
| S-65 | S-65 |
| S-60X | S-60X |
| S-60 XC | S-60 XC |
| S-60 HC | S-60 HC |
| S-60 TRAX | S-60 TRAX |
| S-65 TRAX | S-65 TRAX |
| SX-150 | SX-150 |
| S-65 XC | S-65 XC |
| S-60 HF | S-60 HF |
| S-65 HF | S-65 HF |
| SX-180 | SX-180 |
| SX-135 XC | SX-135 XC |
| S-40 | S-40 |
| S-45 | S-45 |
| S-80 XC | S-80 XC |
| S-85 XC | S-85 XC |
| S-80 HF | S-80 HF |
| S-85 HF | S-85 HF |
| SX-105 XC | SX-105 XC |
| SX-125 XC | SX-125 XC |
| S-40 XC | S-40 XC |
| S-45 XC | S-45 XC |
| S-40 TRAX | S-40 TRAX |
| S-45 TRAX | S-45 TRAX |
| S-40 HF | S-40 HF |
| S-45 HF | S-45 HF |
| S-60 J | S-60 J |
| S-80 J | S-80 J |
| S-60 FE Hybrid | S-60 FE Hybrid |
| S-60 DC | S-60 DC |
| S-60 FE | S-60 FE |
| S-85 XC FE | S-85 XC FE |
| S-85 XC E | S-85 XC E |
| S-100 | S-100 |
| S-105 | S-105 |
| GS-3384 | GS-3384 |
| GS-3390 | GS-3390 |
| GS-4390 | GS-4390 |
| GS-5390 | GS-5390 |
| GTH-844 | GTH-844 |
| GTH-1056 | GTH-1056 |
| GTH-636 | GTH-636 |
| GTH-1256 | GTH-1256 |
| GTH-1044 | GTH-1044 |
| GTH-1244 | GTH-1244 |
| GTH-1544 | GTH-1544 |
| TZ-34/20 | TZ-34/20 |
| Z-51/30J | Z-51/30J |
| Z-62/40 | Z-62/40 |
| Z-40/23N | Z-40/23N |
| Z-40/23N RJ | Z-40/23N RJ |
| Z-45/25 | Z-45/25 |
| Z-45/25J DC | Z-45/25J DC |
| Z-45/25J Bi-Energy | Z-45/25J Bi-Energy |
| Z-45/25J IC Power | Z-45/25J IC Power |
| Z-30/20 N | Z-30/20 N |
| Z-30/20N RJ | Z-30/20N RJ |
| ZX-135/70 | ZX-135/70 |
| Z-80/60 | Z-80/60 |
| Z-45 XC | Z-45 XC |
| Z-60/37 DC | Z-60/37 DC |
| Z-60/37 FE Hybrid | Z-60/37 FE Hybrid |
| Z-45/25 IC | Z-45/25 IC |
| Z-34/22 IC | Z-34/22 IC |
| Z-60 DC | Z-60 DC |
| Z-60 FE Hybrid | Z-60 FE Hybrid |
| Z-33 DC Power | Z-33 DC Power |
| Z-45 FE Hybrid | Z-45 FE Hybrid |
| Z-45 DC | Z-45 DC |
| Z-60 FE | Z-60 FE |
Verify Before You Order
Fitment is machine-number and revision-specific; always confirm your model and serial number against the fitment list.
Why Buy From DHS Equipment
Every part is verified against the manufacturer's part number before it ships, so what you order is what arrives. We carry parts from leading OEM brands and our own DHS Quality Parts line of professional aftermarket components. Need help finding the right part? Our team is available to confirm compatibility whenever you need it. Orders are processed fast to keep your jobs on track. We don't just sell parts. We keep you jobsite ready.
Questions? Contact our team at [email protected] or 866-611-9369 — DHS Equipment is here to help you maintain peak performance.
